The Country Shed 

Mounts and Scopes Tactical Shotgun Meat Processing Heated Gloves & Socks SAKO Tikka Beretta
Holsters Rifle Bases

Fishing Equipment

Handgun / Pistol

DVD's and CD's

Rifle Stocks High Capacity Magazines Tools Books Sling Shots
Flashlights & Lasers Shotgun Stocks Survival Gear

Special Closeouts

General Accessories

Home Contact Us Ordering Shipping & Policies Links What's New & Hot Gift Ideas Join Email List Special Closeouts

 

AK-47 Adjustable and Collapsible Stocks

Stocks, Stock, AK-47, AK47, MAK-90, Variants, Collapsible, Adjustable,  Synthetic, Black, Flat Dark Earth, Tan, OD Green, ACU, Army Combat Uniform, Foregrip, Stamped Receiver, Milled, Pistol Grip, Tactical, Rail, Galil,  Recoil Pads, Butt, Fusion, T6, Rifle, Advanced Technologies, Tapco, Choate, Command Arms, Military Grade Composite, US Compliance Part, Furniture, Replacement, Sling Swivel, Mil STD 1913, Heat Resistant, SAW, 6 Position

Slidefire AK-47 Right Hand Stock
Fits most stamped receivers. Will not fit milled receivers. Compatible with any AK-47 equipped with a standard stock and offers bolt and go convenience without any additional modifications to the firearm.To install remove the factory pistol grip and replace it with the provided Interface Block. SSAR-47 replaces the standard stock by sliding onto the buffer tube. All tools required to install are provided. Shooter activates the firing mechanism by moving the upper assembly forward. As a result of the forward movement required to discharge each round the shooter naturally corrects their point-of-aim for each shot and prevents recoil from pushing the firearm's muzzle upward in an unsafe direction. Constructed of premium reinforced high strength polymer. Includes SSAK-47 XRS rifle stock, interface block, nut retainer, hex key, mounting hardware and instructions.

 

Features:
Allows shooter to shoot as quickly as desired, in a safe manner.
Easily installs on most AK-47 rifles.
No permanent modifications necessary.
30 day money back guarantee.
Made in the USA.
Constructed of Premium Reinforced High Strength Polymer.

Fits:
Most stamped Receivers. Will not fit milled receivers or under-folders.
Some Sling Plates may not be compatible.

Includes:
SSAK-47 XRS™ Rifle Stock
Interface Block, Nut Retainer.
Hex Key.
Mounting Hardware.
Instructions.

 

Slidefire Stock Shown On AK-47

Slidefire Stock Shown On AK-47

Fits Stamped Receivers Only

When looking at the rear of the receiver with the stock removed, you can easily identify the receivers. You can also identify the receivers from the size of the groove in front of the trigger guard. Small dimple equals stamped receiver.

Item Number Price  
SSAK-47XRS $289.00 Out Of Stock

 

AK-47 KickLite Recoil Reducing Tactical Stock

-Patented KickLite recoil suppression technology utilizes heavy duty spring to reduce recoil for up to 50%

-AK model fits all AK's with stamped receivers as well as converted Saigas.

-6 Position Tactical Stock

-11.5" to 15" Length Of Pull

-Includes Stock and and Recoil Pad Included (Forend and Pistol Grip NOT Included)

Made In The USA

Item Number   Price  
KLT005 Phoenix Technology AK-47 Stamped Receiver  Kick Lite Recoil Reducing Tactical Butt Stock- Black $99.00
KLT005DE Phoenix Technology AK-47 Stamped Receiver  KickLite Recoil Reducing Tactical Butt Stock- Dark Earth $99.00

AK-47 Field Series Stock

Same as the Kicklite Series above, except this stock does NOT have the recoil Reduction System. It is a standard 6 position stock with NO RECOIL REDUCTION SYSTEM

Item Number   Price  
FST05B Phoenix Technology AK-47 Stamped Receiver  Field Series - (No recoil Reduction System) - Black $60.00
FST05DE Phoenix Technology AK-47 Stamped Receiver  Field Series - (No recoil Reduction System) -  $60.00

 

Adv Tech AK Strikeforce Package (Stamped Receivers)  

6 Position Collapsible/Side Folding Stock, Handguards & Pistol Grip Package with Cheekrest & Buttpad

Conversion kit may only be utilized on AK’s using folding stocks prior to 11/90 or you must have enough compliance parts to be legal as a folder; assembly otherwise may be in violation of Sec. 922(R). NOTE: Stock and handguard are Made in USA and count towards compliance parts.

 Six-Position Collapsible/Side Folding
• Folds to the Left Side of the Receiver (One Second Open/Close)
• Removable/Adjustable (3/8”) Cheekrest
• Removable Buttpad
• Store Extra Light/Laser/Batteries Inside Stock Tube
• May be fired from folded position
• Sling Swivel Stud
• Improved Ventilation
• Use Original Mounting Hardware for Installation
• Assembled in Fixed Position
• Ergonomic and Textured Upper and Lower Handguards
• One 4” and Three 2” Picatinny Rails
• Molded Inserts for When Rails are Not Used
• Rails are Removable and Interchangeable

• Handguards are Ventilated
• Sling Swivel Stud
• Count Towards US Compliance Parts
• Ergonomic, Textured Pistol Grip
• Installs with Original Mounting Hardware (Screw & Nut)
• Matches Advanced Technology, Inc Handguards
• Counts Toward US Compliance Parts
• Virtually Indestructible
• Matte Black
• Glass-Filled Nylon
• Made in USA
• Lifetime Warranty
• No Gunsmithing

AK Strikeforce Package

AK Strikeforce Package

Conversion kit may only be utilized on AK’s using folding stocks prior to 11/90 or you must have enough compliance parts to be legal as a folder; assembly otherwise may be in violation of Sec. 922(R). NOTE: Stock and handguard are Made in USA and count towards compliance parts.

FITS: All AK Variants (Stamped Receivers)

Item Number     Description Price  
  AKA2300 Adv Tech AK Strikeforce Package (Buttstock, Upper & Lower Handguards, & Pistol Grip) $120.00 Discontinued
  AKA3500 Adv Tech AK Strikeforce Handguards (Upper and Lower) with Picatinny Rails & Inserts) $45.00
  AKA3400 Adv Tech AK Strikeforce Pistol Grip $25.00 Discontinued
  AKA3600 Adv Tech AK Strikeforce Collapsible, Side Folding Buttstock w/Adjustable Cheekrest & Buttpad $50.00

 

AK-47 Scorpion Recoil Pistol Grip

•Scorpion Recoil Pistol Grip
-Recoil Impact is Absorbed - Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter
-Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift
-Not Affected by Chemicals, Load Size or Extreme Temperatures
-Eliminates the Felt Punch of the Recoil
-Removes Limitations from Spring and Piston Type Recoil Suppression Systems
•Ergonomic Design
•Sure-Grip Texture
•Easy Installation
•Virtually Indestructible
•Includes Steel T-Nut and Steel Bolt
•DuPont® Extreme Temperature Glass Reinforced Polymer
•Manufactured in the USA
•Limited Lifetime Warranty

Fits most stamped receivers. Will not fit milled receivers.

This is a pistol grip only. Picture above shown the pistol grip on an AK-47. Nothing else is included.

Item Number Price  
A.5.10.2346 $35.00

 

AK-47 T6 Adjustable Stock and Matching Foregrip and Pistol Grip
bulletManufactured out of military grade composite to ensure high quality and strength
bulletNo modifications required  for stamped 1.05mm receivers with standard tang    
bulletEasily modified for thicker receivers
bulletPerfect for private defense, military and police applications; six (6) position stock easily adjusts to body armor
bulletErgonomically designed for better comfort
bulletU.S. Sec. 922r compliant part
bulletMade In The U.S.A.
bulletMarked TAPCO U.S.A.
bulletLifetime warranty

Available in Black, Tan, and OD Green

 Item# STK06160B

 

 

 

 

bullet

Molded after the M249 military issue SAW

bullet

Ergonomic angle offers better comfort

bullet

Comes standard with a storage compartment door

bullet

Constructed from military grade composite

bullet

U.S. Sec. 922r compliant part

bullet

Marked TAPCO U.S.A. Made in USA

bullet

Lifetime warranty

bullet

Made In The U.S.A.

Item #STK06220B

bulletReduces heat and improves ventilation by providing a greater cooling area around the barrel
bulletModeled after the original Galil pattern
bulletConstructed from military grade composite
bulletRemovable top cover for full Galil type ventilation
bulletU.S. Sec. 922r compliant part
bulletMade In The U.S.A.
bulletMarked TAPCO U.S.A.
bulletLifetime warranty

Item #STK06310B

STK90161 Black Recoil Pad  Sold Separately 

Item Number Description Price  
STK06160B AK-47 T6  Adjustable Stock Black  $48.00
STK06220B AK SAW Style Pistol Grip Black $19.00
STK06310B AK Galil Style Handguard Black $37.00
AKADJSTOCKCOMBOBLACK AK Adjustable Stock (STK06160B), Pistol Grip (STK06220B) and Handguard  (STK06310B) Combo $100.00
STK90161 SKS/AK-47 Tapco Collapsible Stock Recoil Pad Black $11.00
 

Item Number Description Price  
 STK06160F AK-47 T6  Adjustable Stock Flat Dark Earth $48.00
  STK06220F AK-47 SAW Style Pistol Grip Flat Dark Earth $19.00
 STK06310F AK-47 Galil Style Handguard Flat Dark Earth $37.00
AKADJSTOCKCOMBOFLATDE AK-47 Adjustable Stock (STK06160F), Pistol Grip (STK06220F) and Handguard  (STK06310F) Flat Dark Earth $100.00

 

AK-47 T6 Adjustable Stock and Matching Foregrip and Pistol Grip

bulletManufactured out of military grade composite to ensure high quality and strength
bulletNo modifications required  for stamped 1.05mm receivers with standard tang    
bulletEasily modified for thicker receivers
bulletPerfect for private defense, military and police applications; six (6) position stock easily adjusts to body armor
bulletErgonomically designed for better comfort
bulletU.S. Sec. 922r compliant part
bulletMade In The U.S.A.
bulletMarked TAPCO U.S.A.
bulletLifetime warranty

Available in Black, Tan, and OD Green

 Item# STK06160B

 

 

 

 

 

 

bullet

Molded after the M249 military issue SAW

bullet

Ergonomic angle offers better comfort

bullet

Comes standard with a storage compartment door

bullet

Constructed from military grade composite

bullet

U.S. Sec. 922r compliant part

bullet

Marked TAPCO U.S.A.

bulletMade In The U.S.A.
bullet

Lifetime warranty

Item #STK06220B

 

 

 

 

AK Fusion Handguard 

Designed with direct input from our military clientele, our AK FUSION handguard set enhances the look and function of your AK47.  The lower handguard houses a concealed Picatinny rail for mounting lights, lasers, or vertical grips.  The matched upper handguard offers increased dissipation and improved styling.  This item counts as 1 U.S. Sec 922R compliant part.

bulletMade In The U.S.A.

Available in Black, Flat Dark Earth, and OD Green

STK90161 Black Recoil Pad  Sold Separately 

Item Number Description Price  
STK06160B AK-47 T6  Adjustable Stock Black $48.00
STK06220B AK SAW Style Pistol Grip Black $19.00
STK06311B Fusion AK-47 Upper and Lower Handguard Black $45.00
AKADJSTOCKCOMBOFUSIONBLACK AK Adjustable Stock (STK06160B), Pistol Grip (STK06220B) and Fusion AK-47 Upper and Lower Handguard Black (STK06311B) $107.00
STK90161 SKS/AK-47 Tapco Collapsible Stock Recoil Pad Black $11.00
Item Number Description Price  
  STK06160F AK-47 T6  Adjustable Stock Flat Dark Earth $50.00
 STK06220F AK-47 SAW Style Pistol Grip Flat Dark Earth $19.00
  STK06311F Fusion AK-47 Upper and Lower Handguard Flat Dark Earth $45.00
AKADJSTOCKCOMBOFUSIONFLATDE

 

AK-47 Adjustable Stock (STK06160F), Pistol Grip (STK06220F) and Fusion AK-47 Upper and Lower Handguard Black (STK06311F)

$107.00

 

AK-47 6 Position CBS Stock with Aluminum Tube for AK47 Stamped Receiver
6 Position CBS Stock with Aluminum Tube for AK47 Stamped Receiver.

Butt Stock
NTOA (National Tactical Officers Association) tested and recommended.
bulletAluminum buffer tubes provide sealed storage area for a cleaning kit or small items
bulletStock angle is higher, flatter for higher cheek weld, providing increased accuracy
bulletSide snap-tight latch compartment provides storage for 4 CR123 batteries
bulletProvides longer length of pull than standard AK stock
bulletSide Picatinny rail allows addition of Adjustable Cheek Piece (ACP)
bulletRubber non-slip buttpad with tapered angle, allows faster shouldering and increased comfort with body armor
bullet2 ultrasonically welded metal quick release sling mount points



The 6 positions allow length adjustment up to 10cm.
Water tight storage compartment inside tube for cleaning kit, batteries and more.
• Aluminum Construction
• For AK47 stamped receivers
Comes with CBS Collapsible Stock

MANUFACTURERS LIFETIME WARRANTY

 

 

 

 

Stock & Tube Only - Gun, Bipod, & Foregrip NOT included

Item Number Description Price  
ACAKC-B (AKTSCBS) AK-47 6 Position CBS Stock with Aluminum Tube for AK47 Stamped Receiver Black $126.00

 

Tapco AK-47 T6 Adjustable Stock For MILLED Receivers - Black

bulletFits Milled AK Receivers
bulletWill not fit on AK variants with a bottom tang, a slant-cut receiver at the rear, or an underfolder stock
bulletWill not fit MAK 90
bulletCounts as 1 U.S. 922r Compliant Part
bulletItem Includes:
- T6™ Stock Body
- AK 6 Position Stock Tube for Milled AK Receivers
bulletLengh of Pull:
- 10.5" (fully collapsed)
- 11.25"
- 12.25"
- 13"
- 13.75"
- 14.5" (fully extended)
bulletMade In The USA

People were not all created equal in size and shape, that's just a fact. This being true, why do manufacturers try to make you change to fit the stock? Tapco thinks the stock should change to fit you. Tapco's INTRAFUSE® AK T6™ Stock allows you six positions to work with so that it always feels as if it was custom made for you. On top of this, Tapco made sure that the stock and the tube are both constructed of the highest strength composite available so any worries about damage can be cut to zero. So next time you pick up your AK and realize that it doesn't feel quite as comfortable as it should, do yourself a favor and get an INTRAFUSE ® AK T6™ Stock.

Item Number Price  
STK06161B $50.00

 

AK-47 6 Position CBS Stock with Aluminum Tube for AK47 Milled Receiver

 

bulletAluminum buffer tubes provide sealed storage area for a cleaning kit or small items
bulletStock angle is higher, flatter for higher cheek weld, providing increased accuracy
bulletSide snap-tight latch compartment provides storage for 4 CR123 batteries
bulletProvides longer length of pull than standard AK stock
bulletSide Picatinny rail allows addition of Adjustable Cheek Piece (ACP)
bulletRubber non-slip buttpad with tapered angle, allows faster shouldering and increased comfort with body armor
bullet2 ultrasonically welded metal quick release sling mount points


The 6 positions allow length adjustment up to 10cm.
Water tight storage compartment inside tube for cleaning kit, batteries and more.
• Aluminum Construction
• For milled receivers
Includes a CBS!

MANUFACTURERS LIFETIME WARRANTY

 

AKTMCBS

Stock & Tube Only - Gun, Bipod, & Foregrip NOT included

Item Number Description Price  
AKTMCBS-B (ACAKC6MB) AK-47 6 Position CBS Stock with Aluminum Tube for AK47 Milled Receiver Black $126.00

 

Command Arms Saddle-Ergonomic Cheek Rest for M16/AR15/M4 Butt Stock

Saddle-Ergonomic cheek rest with two storage compartments for M16/AR15/M4 Butt Stock.

Features:
• Greatly increases the cheek support whilst shooting.
• Significantly improves the cheek and head stability whilst aiming and shooting - eliminates the typical head movement and fatigue associated with ‘sighting in’ targets for extended periods.
• Faster target acquisition and stay on target.
• Store up to Six CR123 batteries.
• Store cleaning materials and other small gun parts.
• Waterproofed.
• Lightweight.
• Suitable for butt stocks manufactured by Colt, Bushmaster, CAA, Tapco, Rockriver Arms, Armalite, Colt Canada and many more.
• Lifetime warranty.

SST1 shown on stock SST1Black
SST1BLACK Showing Battery Compartments SST1BLACK Showing Battery Compartments
Item Number Description Price  
SST1BLACK Command Arms Saddle-Ergonomic Cheek Rest for M16/AR15/M4 Butt Stock Black $25.00
SST1TAN Command Arms Saddle-Ergonomic Cheek Rest for M16/AR15/M4 Butt Stock Tan $25.00

 

Command Arms Adjustable Cheek Piece

Adjustable Cheek Piece for Command Arms CBS and CBST  Picatinny rail
Clamps onto CBS and CBST  Picatinny rail
Height adjustment for eye alignment with optics
Horizontal adjustment along Picatinny rail
Made from reinforced polymer

Item Number    Description Price  
ACPB Command Arms Adjustable Cheek Piece Black $30.00
ACPG Command Arms Adjustable Cheek Piece OD Green $30.00
ACPT Command Arms Adjustable Cheek Piece Tan $30.00

 

 EMA Cheek Rests For Collapsible Stocks 
Raise your eye level for proper sight or optic alignment - raise: 0.7" or 1.25". 2 Cheek rests included
bulletInstalls instantly on most collapsible stocks.
bulletMade of rugged glass reinforced polymer to withstand harsh tactical conditions.
bulletNo tool installation, snaps into place.
bulletFits “ribbed” collapsible style stocks.
bulletIdeal with #CBS butt stock.
bulletNo Gunsmith required • Mill-standard • Warranty: 10 years

 

Stock Not Included

Item Number Price  
CP $21.00

 

EMA Cheek Rest 2.6 CM Rise For CBS Stock

Cheek Rest For Existing Stock - 2.6cm Rise. Polymer Made
Raise your eye level for proper sight or optic alignment - raise: 2.6cm.

bulletInstalls instantly on most collapsible stocks.
bulletMade of rugged glass reinforced polymer to withstand harsh tactical conditions.
bulletNo tool installation, snaps into place.
bulletFits “ribbed” collapsible style stocks.
bulletIdeal with #CBS butt stock.
bulletNo Gunsmith required • Mill-standard • Warranty: 10 years

Eligibility:
For M4 style stocks

Materials:
Made of Polymer

Measurements:
Weight(gr): 56
Height(cm): 13.1
Length(cm): 6.5

Rise: 2.6 CM

Stock NOT Inlcuded

Item Number Price  
CP2 $16.00

 

ATI AK-47 Adjustable Side Folding Strikeforce Stock Package with Scorpion Recoil System

Six Position Adjustable Side Folding Stock with Scorpion Recoil System, Handguards and Adjustable Cheekrest

Position Adjustable/Side Folding Stock
•Can be Fired from the Folded Position
•New and Improved Pivot Housing Assembly
•Scorpion Recoil System ?Scorpion Razorback Recoil Pad – Non-Slip, Removable
-Scorpion Recoil Pistol Grip – Ergonomic, Sure-Grip Texture
-Recoil Impact is Absorbed – Shooting any Load Size can now be done with No Pain being Transferred to the Shooter
-Not Affected by Chemicals
-Remains Flexible in Extreme Temperatures
-Eliminates the Felt Punch of the Recoil
-Removes Limitations from Spring and Piston Type Recoil Suppression Systems

•One 4” Picatinny Rail
•Two 2” Picatinny Rails
•One 2” Picatinny Rail with Swivel Stud
•Blank Inserts for when Rails are not in use
•Ergonomic, Textured and Ventilated Upper and Lower Handguards
•Removable/Adjustable Cheekrest
•3M Industrial Grade Self-Adhesive Soft Touch Cheekrest Pad
•Slot for Tactical Sling Attachment
•Three Sling Swivel Studs
•Includes Steel T-Nut and Bolt
•DuPont®Extreme Temperature Glass Reinforced Polymer
•Manufactured in the USA
•Limited Lifetime Warranty

Fits Most stamped receivers. Will not fit milled receivers.

Made In The USA

Side Folding Stock Note: Your firearm must meet SEC 922R requirements to retain the adjustable buttstock in the folding buttstock configuration. If your firearm does not meet the SEC 922R requirements, you must equip the firearm with a fixed position and non-folding buttstock.?

SEC 922R: Stocks, handguards and pistol grips are Manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.?

 

Item Number Price  
A.2.10.1250 $120.00

 

ATI Six Position Adjustable Side Folding Stock with Scorpion Razorback Recoil Pad and Adjustable Cheekrest

-Six Position Adjustable/Side Folding Stock
-Can be Fired from the Folded Position
-Scorpion Razorback Recoil Pad
-Recoil Impact is Absorbed
-Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter
-Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift
-Not Affected by Chemicals
-Remains Flexible in Extreme Temperatures
-Eliminates the Felt Punch of the Recoil
-Removes Limitations from Spring and Piston Type Recoil Suppression Systems
-Non-Slip, Removable
-3M Industrial Grade Self-Adhesive Soft Touch Cheekrest Pad
-Removable/Adjustable Cheekrest
-Slot For Tactical Sling Attachment
-Two Sling Swivel Studs
-DuPont® Extreme Temperature Glass Reinforced Polymer
-Manufactured in the USA
-Limited Lifetime Warranty

Fits: Most Stamped AK-47 Receivers. Will not Fit Milled Receivers

Note: Sling Swivel Studs Accepts ATI's Sling Swivel (Part # A.5.10.2506) or any Standard Sling Swivel 

Side Folding Stock Note: Your firearm must meet SEC 922R requirements to retain the adjustable buttstock in the folding buttstock configuration. If your firearm does not meet the SEC 922R requirements, you must equip the firearm with a fixed position and non-folding buttstock.

Made In The USA

SEC922R: ATI products are manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.

AKA3600 Shown Above

Forend, Gun & Mag NOT Included

Forend, Gun & Mag NOT Included

Item Number Price  
AKA3600 $49.00

 

ATI AK-47 Ultimate Professional Strikeforce Stock Package with Scorpion Recoil System

-Six Position Adjustable/Side Folding Stock
-Can be Fired from the Folded Position
-Scorpion Recoil System
-Scorpion Razorback Recoil Pad
-Non-Slip, Removable
-Scorpion Recoil Pistol Grip
-Sure-Grip Texture
-Recoil Impact is Absorbed
-Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter
-Not Affected by Chemicals
-Remains Flexible in Extreme Temperatures
-Eliminates the Felt Punch of the Recoil
-Removes Limitations from Spring and Piston Type Recoil Suppression Systems
-Military Type III Anodized, 6061 T6 Aluminum
-One 4” Picatinny Rail
-Two 2” Picatinny Rails
-One 2” Picatinny Rail with Swivel Stud
-6 Position Commercial Buffer Tube
-Buffer Tube Adapter
-Blank Inserts for When Rails are Not in Use
-Ergonomic, Textured and Ventilated Upper and Lower Handguards?
-3M Industrial Grade Self-Adhesive Soft Touch Cheekrest Pad?
-Removable/Adjustable Cheekrest
-Slot for Tactical Sling Attachment
-Three Sling Swivel Studs
-DuPont® Extreme Temperature Glass Reinforced Polymer
-Includes Steel Castle Nut, Steel Locking Ring, Steel T-Nut and Steel Bolt
-Manufactured in the USA
-Limited Lifetime Warranty

Fits: Most stamped AK-47 receivers. Will not fit milled receivers.

Note: Sling Swivel Studs Accepts ATI's Sling Swivel (Part # A.5.10.2506) or any Standard Sling Swivel 

Side Folding Stock Note: Your firearm must meet SEC 922R requirements to retain the adjustable buttstock in the folding buttstock configuration. If your firearm does not meet the SEC 922R requirements, you must equip the firearm with a fixed position and non-folding buttstock.

Made In The USA

SEC922R: ATI products are manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.

A.2.10.1029

 

 

Item Number Price  
A.2.10.1029 $165.00

 

ATI AK-47 Ultimate Professional Plus Strikeforce Stock Package

Six Position Adjustable Side Folding Stock with Aluminum Upgrade Package, Handguards, Pistol Grip, Forend Pistol Grip, Scorpion Razorback Recoil Pad and Adjustable Cheekrest

 

 

 

 

 

•Six Position Collapsible/Side Folding Stock
•Can be Fired from the Folded Position
•Scorpion Razorback Recoil Pad
-Recoil Impact is Absorbed – Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter
-Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift
-Not Affected by Chemicals
-Remains Flexible in Extreme Temperatures
-Eliminates the Felt Punch of the Recoil
-Removes Limitations from Spring and Piston Type Recoil Suppression Systems
-Non-Slip, Removable
•Military Grade Type III Anodized, 6061 T6 Aluminum
-One 4” Picatinny Rail
-Two 2” Picatinny Rails
-One 2” Picatinny Rail with Swivel Stud
-Six Position Commercial Buffer Tube
-Buffer Tube Adapter
•Blank Inserts for when Rails are not in use
•Ergonomic, Textured and Ventilated Upper and Lower Handguards?
•Ergonomic, Textured Pistol Grip
•Forend Pistol Grip
•3M Industrial Grade Self-Adhesive Soft Touch Cheekrest Pad
•Removable/Adjustable Cheekrest (3/8”)
•Slot for Tactical Sling Attachment
•Three Sling Swivel Studs
•DuPont® Extreme Temperature Glass Reinforced Polymer
•Includes Steel Castle Nut and Steel Locking Ring
•Manufactured in the USA
•Limited Lifetime Warranty

Fits Most stamped AK receivers. Will not fit milled receivers.

Side Folding Stock Note: Your firearm must meet SEC 922R requirements to retain the adjustable buttstock in the folding buttstock configuration. If your firearm does not meet the SEC 922R requirements, you must equip the firearm with a fixed position and non-folding buttstock.?

SEC 922R: Stocks, handguards and pistol grips are Manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.

Made In The USA

 

Item Number Price  
A.2.10.1100 $180.00
 

 

 

Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

 

 

Can't find what you are looking for???  Contact Us  with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes. 

  2014, The Country Shed

RESTRICTED ITEMS   Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed  does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws.  You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area.  Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle,  Handgun, Pistol, Assualt  Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers,  UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate,  MAKO,  Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!