Takes standard Weaver rings (not included) and has twelve slots for scope or accessory placement.  Accepts full or compact length rifle scopes.  Has accessory rail on side for laser or flashlight (any device that attaches to a Weaver rail) Fits all AK style side rail mounts. Side rail on AK receiver not included.  Mount allows use of existing sights. (See-thru Mount) 

Rings NOT included

This side rail mount attaches to your receiver to accept a Side Rail Scope Mount like the MNT-973 or MNT-978. Your receiver must be drilled and the rail attached with rivets. (rivets or instructions not included)

AK-47 with mount and accessories (not included)

UltiMAK M1-B-- A rock-solid platform for your premium optics. With the increasing popularity of the AK based rifles in three gun competitions, the need for a handy, light, completely reliable high speed sighting system has resulted in the UltiMAK M1-B optic mount. Its Picatinny style rail is positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature.

The mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy.

Shown here the M1-B is installed on an Egyptian rifle with a Choate Dragunov style stock.

The UltiMAK M7-B adds critical functionality to this AMD-65. This semi auto version makes an excellent sporting weapon. The shorter AK, with its folding stock, was originally designed for motorized units. It's smaller size makes it easier to handle in the confined spaces of troop carriers, aircraft, and other vehicles. It uses a 20 round magazine (shown) for the same reason, but it will take the 30 round mags too. The ventalated metal "forend" required some minor fitting to make room for the mount and barrel clamps. This was easily accomplished using a Dremel tool, finishing afterwards with some cold bluing compound.

This AMD (cal. 7.62 x 39 mm) is afflicted with a permanently attached, 4-inch barrel extension in the form of a muzzle break (originally the break would have been a little bit shorter). The primary purpose of the extended muzzle break, in this case, is to get the barrel length up to the minimum 16 inches required to, apparently, render the firearm unsuitable for criminal or nefarious applications in the U.S.. Certainly though, this little weapon is handsome, accurate, tough, potent, reliable and affordable, not to mention extremely cool (when was the last time you said that about a politician?). This entire package with UltiMAK mount and Aimpoint CompC reflex sight, several spare magazines, case, and a small supply of ammo, cost less than a thousand dollars.

Leaves room for bayonet on gas block mounted lugs.
Color; Black
Made in U.S.A.

 You can mount a quality laser sight module with full confidence in maintaining your zero under harsh field conditions. A result of the thoughtful engineering you've come to expect from UltiMAK, it increases the cooling efficiency of the rifle, and is surprisingly lightweight, strong, comfortable, stable and versatile.

The ACR2 body fits over the outside of the original forend cap (covering the original sling loop) and has enough width that your rail mounted items will be far less likely to interfere with one another.

UltiMAK Multi Rail Forend System For Stamped or Milled NEW!! 
Innovative design and precision manufacturing provide a very secure and rugged foundation for your premium accessories. Made of high strength, MIL STD hard anodized aluminum with 4140 steel attach points. Comes with all hardware and instructions. The generous length MIL STD 1913 Picatinny rails give plenty of room for your hand, plus any combination of rail mount lights, lasers, grips, sling mounts, and bipod mounts. Proprietary expanding rear tenon system squares and centers itself inside the receiver with extreme tenacity, while the dual, floating clamp system in front locks the unit to the barrel without applying off-axis forces to the barrel. You can mount a quality laser sight module with full confidence in maintaining your zero under harsh field conditions. A result of the thoughtful engineering you've come to expect from UltiMAK, it increases the cooling efficiency of the rifle, and is surprisingly lightweight, strong, comfortable, stable and versatile.

UltiMAK Multi Rail Forend System Compact Length For Stamped or Milled NEW!! 
Innovative design and precision manufacturing provide a very secure and rugged foundation for your premium accessories. With the growing popularity of the ACR2 system, it became necessary to produce a model that would fit the AMD series AKs having shorter gas tubes, and that would also fit most standard AKs. The new "Compact" ACR2 modular AK forend fills this requirement, plus in its milled AK version it fits the unusual Zastava (Yugo) M70 series AKs that have been popping up in the U.S.. The ACR2 is made of high strength, MIL STD hard anodized aluminum with 4140 steel attach points. Comes with mounting hardware and instructions. The generous length MIL STD 1913 Picatinny rails give plenty of room for your hand, plus any combination of rail mount lights, lasers, grips, sling mounts, and bipod mounts. This "conpact" version is shorter than our other models, but is still longer than the original AK handguard. Our proprietary expanding rear tenon system squares and centers itself firmly inside the receiver. The dual, floating clamp system in front locks the unit to the barrel without applying off-axis forces that could affect accuracy. You can mount a quality laser aiming module with full confidence in maintaining your zero under harsh field conditions. A result of the thoughtful engineering you've come to expect from UltiMAK, it increases the cooling efficiency of the rifle, and is surprisingly lightweight, strong, comfortable, stable and versatile.

The ACR2 body fits over the outside of the original forend cap (covering a forend cap mounted sling loop - sling loops mounted at the gas block are still available for use) and has enough width that your rail mounted items will be far less likely to interfere with one another. Shown below installed with optional accessories (sold separately).

Model# ACR2-SC
Fits AMD-65, plus virtually all other
standard weight stamped AKs.

Model# ACR2-MC For all milled receivers, plus Yugo
(Zastava) M70 series stamped AKs.

Bulgarian SLR-101 (milled receiver) with UltiMAK ACR2-MC

Romanian SAR-1 with UltiMAK ACR2-SC

Hungarian AMD-65 with UltiMAK ACR2-SC

UltiMAK Saiga Shotgun Optic Mount For Adjustable Rib Models  
Low profile, lightweight, rugged, stable and versatile.
Picatinny (1913) style rail mount.
Comes with screws, hardware, and instructions.
No permanent alterations to your shotgun.
Includes integral recoil lug on underside.
Replaces sight rib, bolts front and back.
Model: M11-S
Made in U.S.A.

The UltiMAK M11-S provides the answer to forward mounting a high-speed optic over the gas tube on these handy shotguns, which do not have removable gas tubes like other AKs. This unit replaces the adjustable rib with a solid, recoil-lugged Picatinny style rail that screws to the gun at the gas block and the rear of the gas tube with no drilling or tapping. It works with any IER ("Scout") scope or any high-end reflex or holographic sight. It has survived our most punishing tests, using the heaviest 3" magnum 12 gauge loads-- if your gun can handle it, the UltiMAK mount can handle it. It is shown at right on a Saiga 12 with the excellent Micro T-1 reflex sight from Aimpoint, and in the background, the Trijicon RX09 Reflex sight.

Lower and Upper Hand guard Accessory rail system for the AK47 compliant with MIL-STD 1913. Specifically designed and manufactured to provide a rigid ultra-light platform on which to mount virtually any mission specific accessory.
Features:
* Lower and upper Rail set feature – to MIL-STD 1913.
* No Gunsmithing required.
* Manufactured from Reinforced plastic composite.
* Super light weight.
* Matching Upper Rail System Available.
* Choice of 3 colors: Black, Green OD and Desert Tan.

Lifetime warranty

TDI-AK47X Shown Above On Gun With Accessories (not included)

TDI-AK47X Shown Above On Gun With Accessories (not included)