The Country Shed 

Fishing Equipment

DVD's and CD's

Special Closeouts

Set Of Four

.223 Stripper Clips NEW!! NEW!!

US GI Issue Marked 11010483

Holds quantity 10 .223 rounds

Used Once, Good Shape- Some will show some light rust in a few spot - many without rust

Ammo Not Included

AR-15 Stripper Guide NEW!! NEW!!

Slides onto AR-15 .223 mag for use of stripper clips (Sold Separately) 

Used, but in excellent shape

USGI

NcStar .223 10 Round Stripper Clip (20 Pack) NEW!!  NEW!! 

New Production

Designed to work with the latest generation receiver extension nut, our Enhanced AR-15/M4 Stock Wrench contacts the “castle nut” securely in three notches to ensure a smooth and uniform installation. This tool also provides a boxed end wrench for removing the fixed stock receiver extension found on full size rifles. Manufactured from steel with a soft rubber handle, this tool will provide you with years of use.

Finally an Armorer's Wrench with everything that you need.  This unique tool combines all of the necessary tools to eliminate the need of owning multiple wrench types.  Use it for all of your M16 or AR-15 rifles and all of their variants. 

NEW!! NEW!! NEW!! NEW!! NEW!! 
This block allows the user to work on and install parts to AR-15 / M16 lower receivers. The vise block is locked into the users vise. The block slips into the rifle's magazine well and is held in place by the rifle's magazine catch. Constructed of black injection molded polymer.

Made In The USA

Vice, Gun, and Accessories Not Included

NcStar AR-15 / Mini-14 Speed Loader NEW!!

Strip LULA® Speed Loader For AR-15 .223

.223 caliber ammo on stripper clips can now be loaded in your magazine with unmatched speed - 30 rounds in 12 seconds! The Strip LULA is the fastest, easiest-to-use strip loader on the market, and it fits in your pocket.

• The quickest simplest strip loader available today

• Ultra compact - 1/3 the size of similar loaders

• For AR-15/M-16 magazines.

• Durable reinforced polymer.

Laser Boresighter for .223

The laser boresight that is always with you. Eliminates the need to waste ammo and range time. Simply insert the batteries, close the end cap, insert into the chamber and sight the firearm.

AIM Sports AR Muzzle Brake Short

Fits AR-15

AIM Sports AR Muzzle Brake AK Style

Fits AR-15

Fits the AR-15 / M16

Made by TAPCO in the USA

E&L AR-15 / M16 Brass Catcher

Save your brass for reloading. Our Brass Catchers are uniquely designed to conform to the shape of the firearm. Snaps on and off instantly and are made from strong, light weight, black textured plastic. Each holds a minimum of 60 rounds except (Item #123 - Colt .45, 1911 Frame holds 20 rounds, Item #131 holds 100 links and rounds, Item #138 - M3/M3A1 Grease Gun holds 25 rounds and Item #135, 136 & 137 Shotgun Catchers hold a maximum of 5 rounds).  Brass Catchers will not interfere with any moving parts on the firearm. RIGID BRASS CATCHERS are a pleasant way to save time, money and will also increase the safety factor for the left-handed shooter. Save your brass for reloading - Made in the U.S.A. Unconditional Lifetime Guarantee
In use by the U.S. Military, Prison System and Police Departments around the world.

The E&L Cheek Rests are designed to give the proper eye alignment when using a scope-mounted rifle.  Manufactured with high-impact, glass-filled black nylon, these cheek rests weigh only 3 ounces each.

AR-15/M-16 - Attaches directly to either the A1 or A2 fixed stock as well as the original models without the cleaning kit compartment.

AR15/M16 Cleaning Kit

Cleaning Kit Includes:

1. 5 Piece Rods (includes loop)
2. Adaptor
3. Dual-ended Nylon Brush
4. Bore and Chamber Brushes
5. Oil Bottle
6. Cleaning Cloth
7. Nylon Pouch with 2 Pockets
8. Metal Belt Hanger/Alice Clip
9. Belt Loop

AR15/M16 Belt Pouch Cleaning Kit

Suitable for all .223/5.56mm firearms, this comprehensive kit contains all items necessary to clean your weapon whether in the field or at home.  Stored in a nylon belt pouch, the components include a cleaning rod set, patch holder, bore brush, chamber brush, nylon cleaning brush, and an oil bottle.

Made In the USA

Made In the USA

 Gunslick AR-15 Cleaning Kit

Disassembly/Reassembly Guide for Colt AR-15 Rifles including Variants

Excerpt from this Guide:

1959: Colt acquires manufacturing and marketing rights to AR15.

1962: Colt gets US Department of Defense orders 85,000 M16’s for Vietnam and 19,000 for the Air Force.

Mid 60’s: The M16A1 was updated with a new buffer to reduce the rate of fire, chrome plated chamber and barrel, closed prong flash hider, forward bolt assist, new buttstock with cleaning kit, and a 30 shot magazine. Rifles were also produced by GM and Harington & Richardson during the Vietnam war as well as outside the USA.

1978: M16A2 was produced using an increase barrel diameter, rifling was changed from 1:12 to 1:7 to accommodate a new 62 gr. bullet, modified rear sight, case deflector, new round handguard, and full-auto was replaced with three round burst.

GGAR15 DR Spanish

The Chamber Safety Tool for rifles is a must for any range bag.  As a chamber flag, this tools yellow color clearly shows that the weapon is unloaded and has a strengthened head for increased durability.  In addition to serving as a chamber flag, the flattened edge on the corner of the head allows you to adjust the windage and elevation of your scope.  The strengthened punch is also designed to push out the takedown pins on your AR-15/M16 without scratching the rifle.  

These features make this no ordinary chamber flag.  Make sure you have one for each of your firearms. Also available for pistol and shotguns .

MAKO AR-Rod No Fire Safety Rod for M16 / AR15

The safest solution for training & storage

Features:

• Designed to fit 5.56mm rifles.
• Perfect solution for safe training and gun storage.
• Securely blocks the barrel by preventing a live round being inadvertently chambered.
• Bright colors for better visibility.
• Ideal for weapon safety and accident prevention.

Available in two sizes - 17" and 21"

MAKO Polymer M16/AR15 Ejection Port Cover

The AR-15 Recoil Buffer™ will reduce recoil impulse and prolong the service life of your firearm. This is accomplished by stopping the bolt from directly contacting the receiver. This abrupt transfer of energy can affect zero on scoped rifles. The AR-15 Recoil Buffer™ is manufactured from an advanced polymer that will decelerate the bolt more gradually, reducing the felt recoil and allowing for quicker set-up for the next shot.  Installation is a breeze; drill, screwdriver, and push pin are required for assembly. You can feel the difference the first time you shoot it.

AR-15/M16 Enidine AR-Restor Hydraulic Recoil Buffer

 This is the best buffer on the market today! Reduce felt recoil, improve accuracy, reduce fire rate, suppress bolt bounce, and protect your valuable optics with this simple drop-in replacement. Enidine hydraulic recoil buffers have been employed in military applications to reduce recoil, improve accuracy and increase reliability. Examples include the soft mount for the M2 machine gun and the M249 SAW. Tests have shown the buffer to produce a reduced rate of fire by approximately 200 rounds per minute. The Enidine AR-Restor Hydraulic Recoil Buffer comes with a full 1 year warranty.

EARR Pictured Above

WAS $9.50

CTK Precision Universal Brass Catcher

Simply place the brass catcher next to your firearm and begin shooting.  The brass will be ejected into the high quality mon-rail net.  Use it offhand, prone or from the bench.

The Brass Catcher has a heavy duty steel frame, with a durable E-Coat finish.

GI Blank Firing Adaptor for Carbine Length Model 4, 15, 16
• Fits Standard A2 Flash Hider and Barrel
• Made from High Strength Steel Alloy with Precision Manufacturing
• Robust User-friendly Ring for Handy Carrying and Operation
• Durable Standard Yellow Paint for Long-Term Protection and Distinction
• Field Tested to Deliver Most Excellent Performance
• Most Demanded Part for Law Enforcement/Military Training

NcStar AR-15 Bayonet Lug Bipod NEW!! NEW!!

Tech Sights P3 Ultimate Monopod

The Quick change system attaches to the rear sling swivel stud in under 10 seconds without tools. CNC machined billet aluminum for high strength and low weight (5.4 oz.)  Durable MilSpec hard coat anodized finish.  Rubber contact pads will not harm the firearm.  Two stage telescoping leg provides 360” of movement at 100 yds . Cam locking 1^st stage gets you on target in seconds. Fine tune the elevation with the threaded 2^nd stage. Rotating delrin foot allows for precise elevation adjustments. Low profile design is only 2.7” in the collapsed position. Spring loaded pop out design gets you on target faster. 3 sling swivel attachment points.

Optional AR-15 Sling Swivel Stud also available below (Not Included).

Replaces the factory rear sling loop with a quick change swivel stud for attaching Tech Sights P3 Ultimate Monopod.