The Country Shed 

Mounts and Scopes Tactical Shotgun Meat Processing Heated Gloves & Socks SAKO Tikka Beretta
Holsters Rifle Bases

Fishing Equipment

Handgun / Pistol

DVD's and CD's

Rifle Stocks High Capacity Magazines Tools Books Sling Shots
Flashlights & Lasers Shotgun Stocks Survival Gear

Special Closeouts

General Accessories

Home Contact Us Ordering Shipping & Policies Links What's New & Hot Gift Ideas Join Email List Special Closeouts

 

AR-15 / M16 Magazines and Drums

Mag, Magazine, Clip, AR-15, AR15, M16, .223, Ammunition, 20, 30, Round, Aluminum, High Capacity, Green Follower, Spring, Floor Plate, Feed, Mil, Spec, Phosphate, Finish, Grey, Teflon, Dry Film Lube, Military, Drum, Snail

.223 / 5.56

AR-15 Mag Kit-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

Kit Includes:

6 - ASC AR-15 30 Round Aluminum Magazines (#ASC.223ALGR-30)

1 - #GLMP30 Galati Gear 20-30 Round 6 Magazine Pouch (#GLMP30)

1 - 50 Pack .223 Stripper Clips (#.223STRIPPERCLIP50PACK)

2 - Stripper Guides (#SG223-2)

1 - Lula AR-15 Loader (#LU10B)

1 - AR-15 Disassembly Guide (#GGAR15 DR)

 

Separately $145.00

Kit Special $120.00

 

 

 

 

Item Number Price  
AR15MAGKIT $120.00

 

ASC AR-15 5 or 10 Round Stainless Steel Mag

.223/5.56 Stainless Steel

5 and 10 Round Capacity Available

Anti-tilt Orange follower

5 round mags are a 10 round body blocked to only allow 5 round capacity

Made In The USA by ASC LLC

Item Number   Price  
ASC.223SS-5 ASC AR-15 5 Round Stainless Steel Mag $14.00
ASC.223SS-10 ASC AR-15 10 Round Stainless Steel Mag $14.00

 

ASC AR-15 5 or 10 Round Aluminum Mag

.223/5.56 Aluminum

5 and 10 Round Capacity Available

Anti-tilt Grey follower

5 round mags are a 10 round body blocked to only allow 5 round capacity

Made In The USA by ASC LLC

Item Number   Price  
ASC.223Aluminum-5 ASC AR-15 5 Round Aluminum Mag $14.00
ASC.223Aluminum-10 ASC AR-15 10 Round Aluminum Mag $14.00

 

C-Products AR-15 10 Round Magazine

-10 Round Capacity

-.223/5.56

-Stainless Steel

-Black Mag

-Orange Follower

-Made By C-Products Defense In The USA!!!

Made In The USA

 

 

 

Item Number Price  
CP-223SS-10 $15.00 Out of Stock

 

Tapco AR-15 5 Round Mag (30 Round Mag Limited To 5 Round Capacity)

Same Body As 30 Round, But Limited To 5 Round

Made In The USA by Tapco 

 

 

 

 

 

Item Number Price  
MAG0905 $18.00

 

PRI AR-15  5.56 / .223 Steel 10 Round Magazine -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

PRi Waffled 10 round capacity steel magazine for the AR15 / M16 family of weapons.

PRi magazines are constructed of butt welded steel halves to create the best internal volume for the magazine. We use Magpul anti-tilt follower with spring and push button floor plate. 10 round magazine is 3.125"

Made In The USA

Item Number Price  
05-556-10 $41.00

 

AR-15 20 Round Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

-20 Round Capacity

-.223/5.56

-Aluminum

-Grey mag

-Grey Follower

-Made In The USA By ASC 

 

Item Number Price  
ASC.223ALGR-20 $11.00

 

Cammenga Easymag .223 20 Round AR-15 Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

The CAMMENGA MODEL EM2-556 EASYMAG is a heat-treated steel magazine, with tip-proof steel follower, chamfered feed lips, and a stainless steel main spring, which improves upon the reliability and feeding performance expectations for M16 and AR-15 type weapons. Built to last with high-strength 1050 spring-steel finished with a two layer anti-friction coating. The EASYMAG features an open case design that allows for fast loading, unloading, and cleaning. The front half can be unlocked and opened to facilitate rapid loading without the aid of a loading device. The EASYMAG also accepts stripper clips and can be quickly cleaned without disassembly. Also works great with Bump fire!!

Heat-Treated 1050 Steel construction is highly resistant to deformation and maintains critical dimensions. This increases the EASYMAG’s service life, feeding performance, and reliability compared to any similar magazine designs. Continuous curve geometry design provides optimal feeding performance and dramatically reduces the likelihood of malfunctions in battlefield environments. Slide-open design allows for rapid loading, unloading, cleaning, maintenance, and inspection without disassembly. Accepts standard 10 round stripper clips, spoons, and other loading devices.

bulletAmmunition Type: 5.56x45mm NATO/.223
bulletCapacity: 20 Rounds
bulletWeight: 6.5 oz (Empty)
bulletDimensions: 2.86" x 0.93" x 5.63"
bulletMain Spring: Stainless Steel
bulletMain Body: 1050 Steel, Heat-Treated
bulletFollower: 1050 Steel, Heat-Treated
bulletBaseplate: 1050 Steel, Heat-Treated
bulletFinish: Two-Part, Anti-Friction
bulletCorrosion Protection: 92 Hour Salt Spray
bulletOperating Temperature: -40°F to 380°F

Item Number Price  
EM2-556 $21.00

 

AR-15 30 Round Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

-30 Round Capacity

-.223/5.56

-Aluminum

-Grey mag

-Orange Follower

-Made In The USA By ASC

 

Item Number Price  
ASC.223ALGR-30 $12.00

 

AR-15 30 Round Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

-30 Round Capacity

-.223/5.56

-Aluminum

-Black mag

-Orange Follower

-Made In The USA By C-Products

 

 

 

 

 

Item Number Price  
CP-223ALUMINUM-30 $30.00

 

Colt AR-15 20 and 30 Round Mag -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

Colt Original with Colt floorplate

.223 

Aluminum                        

Green Follower in 30 Round Mag

Black Follower in 20 Round Mag

New, But may show some scratches- typical of Colt Mags

Made In The USA

Item Number Description Price  
SP62103 Colt AR-15 20 Round Mag $21.00
SP62328 Colt AR-15 30 Round Mag $25.00

 

AR-15 30 Round Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

-30 Round Capacity

-.223/5.56

-Stainless Steel

-Black mag

-Orange Follower

-Made In The USA By C-Products

 

 

 

 

 

Item Number Price  
CP.223SS-30 $13.00

 

AR-15 30 Round Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

-30 Round Capacity

-.223/5.56

-Stainless Steel

-Black mag

-Orange Follower

-Made In The USA By ASC

 

 

 

 

 

Item Number Price  
ASC.223SSBL-30 $13.00

 

PRI AR-15  5.56 / .223 30 Round Steel Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

PRi Waffled 30 round capacity steel magazine for the AR15 / M16 family of weapons.

PRi magazines are constructed of butt welded steel halves to create the best internal volume for the magazine. We use Magpul anti-tilt follower with spring and push button floor plate. 30 round magazine is 6.2" in length.

Made In The USA

Item Number Price  
05-556-30 $43.00

 

Bushmaster AR-15 20 and 30 Round Black Mag -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

.223      

20 or 30 Round Capacity

Bushmaster Factory Mag

Item Number   Price  
93304 Bushmaster Factory .223/5.56 20 Round Mag - Blue $21.00
  93306 Bushmaster Factory .223/5.56 30 Round Mag - Blue $21.00

 

Cammenga Easymag .223 30 Round AR-15 Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

The CAMMENGA MODEL EM3-556 EASYMAG is a heat-treated steel magazine, with tip-proof steel follower, chamfered feed lips, and a stainless steel main spring, which improves upon the reliability and feeding performance expectations for M16 and AR-15 type weapons. Built to last with high-strength 1050 spring-steel finished with a two layer anti-friction coating. The EASYMAG features an open case design that allows for fast loading, unloading, and cleaning. The front half can be unlocked and opened to facilitate rapid loading without the aid of a loading device. The EASYMAG also accepts stripper clips and can be quickly cleaned without disassembly. Also works great with Bump fire!

Heat-Treated 1050 Steel construction is highly resistant to deformation and maintains critical dimensions. This increases the EASYMAG’s service life, feeding performance, and reliability compared to any similar magazine designs. Continuous curve geometry design provides optimal feeding performance and dramatically reduces the likelihood of malfunctions in battlefield environments. Slide-open design allows for rapid loading, unloading, cleaning, maintenance, and inspection without disassembly.
Accepts standard 10 round stripper clips, spoons, and other loading devices.

bulletAmmunition Type: 5.56x45mm NATO/.223
bulletCapacity: 30 Rounds
bulletWeight: 8.8 oz (Empty)
bulletDimensions: 2.86" x 0.93" x 7,63"
bulletMain Spring: Stainless Steel
bulletMain Body: 1050 Steel, Heat-Treated
bulletFollower: 1050 Steel, Heat-Treated
bulletBaseplate: 1050 Steel, Heat-Treated
bulletFinish: Two-Part, Anti-Friction
bulletCorrosion Protection: 92 Hour Salt Spray
bulletOperating Temperature: -40°F to 380°F

Item Number Price  
EM3-556 $21.00

 

Tapco AR-15 30 Round Mag -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

Collecting input from military, law enforcement, and civilian shooters, we have designed a magazine that can be depended on during a trip to the firing rang or deployment overseas.  Weapons are only as good as the feeding device used with them and you can count on our magazine to reliably function in any operational environment.  Aggressive horizontal ridges provide increased gripping surface for insertion and extraction of the magazine in wet or muddy conditions.  Molded of reinforced composite, our magazine has a 30 round capacity.  It is made in the U.S.A. and is backed by our lifetime warranty.  Fits the AR15, M4, and M16. 

     -Reinforced composite material for extreme duty use.

-    -Improved follower design that will not tilt.

-    -Compatible with stripper clips, LULA loaders, etc.

-     -Aggressive design provides excellent gripping surfaces.

-     -Will drop free from the weapon.

-     -Available in Black, Olive Drab, Foliage, Dark Earth.

-    -Works with all 5.56mm and .223 ammunition.

-     Chrome Silicon Spring

       Made In The USA

Black                                 Dark Earth

Item Number Description Price  
  MAG0930B Tapco AR-15 30 Round Mag- Black $13.00
  MAG0930F Tapco AR-15 30 Round Mag- Flat Dark Earth $13.00

 

CAA AR-15 30 Round Polymer Mag-Restricted Item -Check Your Local and State Laws Prior To Ordering  

See Shipping & Policies For List Of Restrictions

MAG polymer magazine provides flawless functionality.
Contoured interior prevents jams and misfeeds by keeping individual rounds in the proper position.
Along with a non-tilting stainless steel spring provide 100% reliability.

bulletHigh impact polymer 30 round .223/5.6mm magazine.
bulletLess noise created with a polymer magazine.
bulletNon-tilting follower.
bulletCorrosion resistant stainless steel spring.
bulletLightweight and rustproof.
bulletLifetime warranty. 100% customer satisfaction

Fits:
.223/5.6mm

 

 

 

 

 

Item Number Price  
MAG $15.00

 

CAA AR-15 30 Round Mag W/Window-Restricted Item -Check Your Local and State Laws Prior To Ordering  

See Shipping & Policies For List Of Restrictions

MAG 17 The Clear Action Mag This unique magazine provides both a clear window on the side showing the number of rounds remaining in the magazine and a full magazine indicator button on the bottom.

bulletA clear window on the side of the magazine provides the operator with a visual indicator of the number of remaining rounds
bulletA white full mag indicator on the bottom of the magazine pops out
bulletproviding a tactile indicator during low light conditions
bulletPolymer body provides reduced noise.
bulletHigh impact polymer 30 round .223 magazine
bulletNon-tilting follower
bulletInterior of magazine is perfectly formed to the shape of the round preventing jams and misfeeds
bulletCorrosion resistant stainless steel spring
bulletCounting system does not interfere with disassembly or reduce capacity

 

 

 

 

 

 

Item Number Price  
MAG17 $17.00

 

CAA AR-15 30 Round Countdown Polymer Mag / Shows Remaining Rounds-Restricted Item -Check Your Local and State Laws Prior To Ordering  

See Shipping & Policies For List Of Restrictions

CDMAG polymer magazine provides flawless functionality.
Interior formed with contours in the shape of the rounds to prevent jams and misfeeds. Contoured interior prevents jams and misfeeds by keeping indivdual rounds properly aligned.
Non-tilting follower and stainless steel spring this magazine provides 100% reliability.

bulletHigh impact polymer 30 round .223/5.56mm magazine.
bulletColor coded visual indicator on the bottom that shows remaining rounds.
bulletCounting system does not interfere with disassembly or reduce capacity.
bulletLess noise created with a polymer magazine shell.
bulletNon-tilting follower.
bulletCorrosion resistant stainless steel spring.
bulletLightweight and rustproof.
bulletLifetime warranty. 100% customer satisfaction

Fits:
.223/5.6mm

Item Number Price  
CDMAG $18.00

 

Magpul PMAG 30 AR-15 / M4 30 Round Mag W/Window-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

Magpul Original Equipment (MOE) is a line of firearm accessories designed to provide a high-quality, economical alternative to standard weapon parts. The MOE line distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality.

The PMAG 30 AR/M4 GEN M2 MOE Window is a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI. It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability.

In addition, durable dual-side transparent windows allow for quick determination of approximate number of rounds remaining in the magazine. Utilizing a high visibility indicator coil on the spring and numerical markers on the magazine body, the MagLevel™ system provides positive verification without affecting the durability or reliability of the magazine.

The GEN M2 MOE is identical in form and function to the older model PMAG except that the optional Impact/Dust Cover is now sold separately.
Made In The USA

Features
bulletImpact and crush resistant polymer construction
bulletConstant-curve internal geometry for smooth feeding
bulletAnti-tilt, self-lubricating follower for increased reliability
bulletLong life USGI-spec stainless steel spring, black-oxide coated (MIL-DTL-13924D
bulletTransparent MagLevel windows on both sides of the body along with a painted indicator on the spring allows for easy determination of rounds remaining
bulletTextured gripping surface and flared floorplate for positive magazine handling and easy disassembly

Item Number Description Price  
MAG570-BLK Magpul PMAG 30 AR-15 / M4 30 Round Mag W/Window - Black $15.00
MAG570-FDE Magpul PMAG 30 AR-15 / M4 30 Round Mag W/Window - Flat Dark Earth $15.00

 

PMAG® 30 AR/M4 GEN M3, 5.56x45 Magazine -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

The next-generation PMAG 30 GEN M3 is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

Modified internal and external geometry also permits operation with a wide range of non Colt-spec platforms such as the HK® 416 and MR556A1, M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others. A redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons.

Similar to the MOE PMAG, the GEN M3 features a long-life stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning. In addition, an included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage during storage and transit. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches.

Made In The USA, Ammo not included

Item Number Description Price  
MAG560-BLK PMAG® 30 AR/M4 GEN M3, 5.56x45 20 Round Magazine $14.00
MAG557-BLK PMAG® 30 AR/M4 GEN M3, 5.56x45 30 Round Magazine $15.00

 

Magpul PMAG MOE AR/M4 5.56 30 Round Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

Magpul Original Equipment (MOE) is a line of firearm accessories designed to provide a high-quality, economical alternative to standard weapon parts. The MOE line distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality.

The PMAG 30 AR/M4 GEN M2 MOE is a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI. It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability.

The GEN M2 MOE is identical in form and function to the older model PMAG except that the optional Impact/Dust Cover is now sold separately.

Made In The USA

bulletImpact and crush resistant polymer construction
bulletConstant-curve internal geometry for smooth feeding
bulletAnti-tilt, self-lubricating follower for increased reliability
bulletUSGI-spec stainless steel spring for corrosion resistance and field compatibility
bulletTextured gripping surface and flared floorplate for positive magazine handling and easy disassembly

Item Number Price  
MAG571-BLK $13.00

 

Troy Battle 30 Round Mag -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

AR-15  .223/5.56

Feed lips and anti-tilt follower are reinforced for strength. A bolstered floor plate is set flush so that it will not catch on other magazines when pulled from a pouch. The Troy magazine is as sleek as it is strong. Operators will save crucial seconds when executing magazine changes.

The specially designed spine eliminates the possibility of over insertion that is common with other polymer magazines.

The Troy BattleMag is engineered to function flawlessly with all M4, M16/AR15, HK416®and FN Scar® rifles and carbines. It comes with flush and shock absorbing extended floor plate.

Made In The USA

Item Number Description Price  
SMAG-SIN-00BT-00 Troy Battle 30 Round Magazine - Black $14.00
SMAG-SIN-00FT-00 Troy Battle 30 Round Magazine - FDE $14.00

 

Troy BattleMag For M4/M16/AR15/HK416 and FN Scar Rifles and Carbines Pink 30 Round-Restricted Item -Check Your Local and State Laws Prior To Ordering  

See Shipping & Policies For List Of Restrictions



Feed lips and anti-tilt follower are reinforced for strength. A bolstered floor plate is set flush so that it will not catch on other magazines when pulled from a pouch. Specially designed spine eliminates the possibility of over insertion. Engineered to function flawlessly with all M4, M16/AR15, HK416 and FN Scar rifles and carbines. Comes with flush and shock absorbing extended floor plate.

 

Made In The USA

 

 

 

Item Number Price  
SMAG-SIN-00PK-01 $15.00

 

Lancer L5AVM .223 Magazines-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

The L5 AWM is compatible with modern weapon systems; M4/M16/AR, HK416, SCAR16, and the ARX160

The L5AWM is the only HYBRID AR magazine available today, featuring the best characteristics of Polymer and Steel magazine designs

It's NOT a Polymer Magazine

One Piece Wrap Around, Hardened Steel Feed Lips won't bend or break, steel reinforces the back of the polymer body

It's NOT a Steel Magazine

Lightweight polymer body is impact resistant from -40F to 180F, won't dent like steel and weights the same as aluminum

THE L5AWM IS IN A CLASS ALL BY ITSELF

The L5AWM fills the gap between the current metal and polymer magazine designs combing the best features from both designs into a unique hybrid magazine. L5AWM has the reliability of a steel magazine, the durability of a polymer magazine and the weight of an aluminum magazine.

Unique to the AWM is the one piece wrap-around hardened steel feed lip assembly that is permanently attached to an impact resistant polymer body. The hardened steel feed lips won’t bend, break or deform due to rough handling or long term storage.

An aggressive surface texture has been applied to the polymer body to improve gripping and retrieval from pouches. The combination of steel and polymer result in a lightweight, robust magazine tough enough for professional use.

The internal geometry of the Advanced Warfighter Magazine is a constant curve that has been maximized to feed the 5.56X45mm NATO round and has a non-tilting follower for trouble-free feeding. The feed lips are made from a single piece of precision formed steel that is hardened, then PTFE coated for corrosion resistance. The body and component materials are corrosion and chemical resistant, passing military chemical testing, including exposure to DEET.

The L5 AWM is compatible with modern weapon systems; M4/M16/AR, HK416, SCAR16, and the ARX160 to name a few and is available in 10, 20 and 30 round capacity with a translucent or opaque polymer body.

The L5AWM Translucent Advantage for professionals:

bulletIncreases Op-Tempo
bulletPre-combat inspections and checks
bulletPost contact checks
bulletSpeeds ammunition consolidation
bulletTactical Magazine Changes
bulletThe aggressive body texture improve gripping
bulletDrops free from lower receivers
bulletThe magazine is designed to resist damage from rough handling, dropping and abuse
bulletVehicle Storage
bulletThe L5AWM can be stored loaded in unconditioned environments; from +180F to -50F
bulletAmmunition Carry Policy
bulletRapidly know what’s loaded
bulletShared Resources – expedites shift change
bulletKnow your round count
bulletTranslucency allows range or shift personnel to see if their magazine is serviceable
bulletTraining Safety
bulletVisual inspection lets everyone know how many rounds are on the firing line
bulletQuickly Identify what’s loaded; live rounds, blanks or marker rounds

2320-21             2320-02               2320-04

 

2320-01         2320-03

 

Item Number   Price  
2320-21 Lancer L5AVM 223 Rem 10 Round Translucent Smoke Mag $19.00
  2320-04 Lancer L5AVM 223 Rem 20 Round Black Mag $16.00
2320-02 Lancer L5AVM 223 Rem 20 Round Translucent Smoke $19.00
2320-01 Lancer L5AVM 223 Rem 30 Round Translucent Smoke Mag $19.00
2320-03 Lancer L5AVM 223 Rem 30 Round Black Mag $16.00

 

Promag AR-15 30 Round Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

 

A 30-rd magazine for AR-15 / M16 rifles and carbines. The magazine body and follower are constructed of a proprietary DuPont® Zytel™ based polymer to ensure a long service life. The springs are made from heat treated Chrome-silicon wire for increased reliability and smooth feeding.

Made In The USA

 

 

 

 

Item Number Price  
COL-A18 $12.00

 

Charles Daly Defense AR-15 40 Round Steel Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

-Fits AR-15

-.223/5.56

-40 Round Capacity

-Steel Magazine

-No Tilt Orange Follower

 

 

 

 

Item Number Price  
CHARLESD-.223SS-40 $25.00 

 

AR-15 40 Round Mag -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

-40 Round .223/5.56

-Black Teflon Finish

-Stainless Steel with Orange Follower

-Made In The USA by ASC

ASC Stainless Steel magazines are an improvement on a classic, with the highest levels of durability and increased longevity, simply the best in the industry! Our magazines are manufactured 100% start to finish in the USA using .020 gauge 410 Stainless Steel Alloy, heat treated for superior strength and lasting endurance. They are chemically treated for corrosion resistance [ref QQ-P-35] and coated with our proprietary finish, Marlube which is a wear-in not wear-off coating that burnishes into the surface providing its self-lubricating properties. The interior dimensions of OAL 2.316” ± .002 are perfect for reloads.

Your number 1 choice for reliability, durability and superiority!

ASSEMBLY COMPONENTS

bulletChrome Silicon Springs
bulletEnhanced Anti-tilt Polymer Followers
bullet300 Series SS Floor plate-  Powder coated Matte Black

Item Number Price  
ASC.223SS-40 $20.00

 

Surefire AR-15 / M16 60 Round Mag -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions


The SureFire high-capacity magazine for 5.56x45 mm (.223 Remington) ammunition, also available in a 100 Round version, is compatible with M4/M16/AR-15 variants and other firearms that accept standard STANAG 4179 magazines. Constructed from Mil-Spec hard-anodized aluminum, they feed smoothly and reliably due to optimal geometry, non-binding coil springs, and ingenious nesting polymer followers. The long-lasting springs are cadmium coated for low friction and excellent corrosion resistance. Magazines require no lubricants and can be easily disassembled without tools for cleaning.

SureFire High capacity magazines provide distinct tactical advantages: increased initial firepower in ambush situations; fewer reloads overall, which means less downtime and target distraction in a firefight; fast and easy magazine insertion, even with a closed bolt; less bulk compared to drum mags, enabling a normal weapon grip. The 60-round magazine—slightly thinner than two 30-round magazines clipped together and about the same overall length—fits in most dual magazine pouches, eliminating special carry pouches required for drum magazines.

Length 8 .7 inches
Width 1 .66 inches
Weight
Empty 6 .4 ounces
Loaded 2 .02 pounds

 

Features
bulletCompatible with all weapons that accept standard STANAG 4179 compliant magazines
bulletReliable functioning due to mechanical simplicity and high-quality non-binding coil springs—no lubricants required
bulletLong-lasting springs are cadmium coated for low friction and excellent corrosion resistance
bulletEasily seated in weapon with bolt forward
bulletMay be kept fully loaded for extended periods without spring fatigue
bulletOnly 1.66" thick, less than two 30-round magazines clipped together
bullet60-round magazine is approximately same length as two 30-round magazines clipped together
bullet60-round magazine fits in most dual-mag pouches

 

Item Number   Price  
MAG5-60 Surefire AR-15 / M16 60 Round Mag   $115.00

 

Surefire AR-15 / M16 100 Round Mag -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions
The SureFire high-capacity magazine for 5.56x45 mm (.223 Remington) ammunition, also available in a 60-round version, is compatible with M4/M16/AR-15 variants and other firearms that accept standard STANAG 4179 magazines. Constructed from Mil-Spec hard-anodized aluminum, they feed smoothly and reliably due to optimal geometry, non-binding coil springs, and ingenious nesting polymer followers. The long-lasting springs are cadmium coated for low friction and excellent corrosion resistance. Magazines require no lubricants and can be easily disassembled without tools for cleaning.

SureFire high-capacity magazines provide distinct tactical advantages: increased initial firepower in ambush situations; fewer reloads overall, which means less downtime and target distraction in a firefight; fast and easy magazine insertion, even with a closed bolt; less bulk compared to drum mags, enabling a normal weapon grip. SureFire's 100-round magazine can be carried in an optional nylon pouch that attaches to a MOLLE system vest.

Length 12 .2 inches
Width 1 .66 inches
Weight
Empty 9 .6 ounces
Loaded 3 .3 pounds

Features
bulletFIts the AR-15 / M16
bulletCompatible with all weapons that accept standard STANAG 4179 compliant magazines
bulletReliable functioning due to mechanical simplicity and high-quality non-binding coil spring—no lubricants required
bulletLong-lasting springs are cadmium coated for low friction and excellent corrosion resistance
bulletEasily seated in weapon with bolt forward
bulletMay be kept fully loaded for extended periods without spring fatigue
bulletOnly 1.66" thick, less than two 30-round magazines clipped together

Item Number   Price  
MAG5-100 Surefire AR-15 / M16 100 Round Mag $140.00

 

AR-15 100 Round Drum -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

.223 / 5.56

100 Round Capacity

Available in a Black Back or Clear Back

Black Nylon Case, Graphite, and Loader included

Korean Made 

Shown On Gun

 

Item Number Description Price  
  AR15D AR-15 100 Round Drum - Black  SALE $125.00

WAS $130.00 

Item Number Description Price  
   AR15D-CLEAR AR-15 100 Round Drum - CLEAR  $125.00

 

X-Products AR-15 .223 50 Round Drum-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

X-15  The most compact and versatile 50 round magazine ever produced for the AR-15 in 5.56x45/.223 and 300 AAC Blackout full length. Built entirely of aluminum, there are zero plastic parts. The fully enclosed magazine will operate in the most demanding of operations. The compact design is based on our proven coil magazine technology, which allows side by side staging of ammo in a single stack. The streamlined design allows for no separation of ammunition during function and prevents malfunction. Based on our patent pending design that allows for unlimited spring loads for high rate of fire weapons, it will easily operate up to 1100 rounds per minute. The profile is shorter than a standard 30 round magazine and 4-5 inches shorter than a surefire quad stack magazine.  User friendly ergonomics and the ability to use your sling makes this the choice magazine for 3 gun competitors. Coated in Cerakote for friction reduction and proven reliability without using lubrication, and given a lifetime warranty. Manufactured in the USA, fit’s most M16/AR-15 rifles, Bushmaster ACR, SCAR 16 and Stanang Rifles with improved M4 feed ramps.

Made In The USA

Note: May require modification to work in Robinson Arms XCR, Bushmaster ACR and IMI Tavor.

Item Number Price  
X-15 $220.00

 

X-Products AR-15 .223 50 Round Skeletonized Drum-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

The X-15 Skeletonized is one if not the most compact and versatile 50 round magazine ever produced for the AR-15 in 5.56x45/.223 and 300 AAC Blackout full length.  Designed and built primarily from aluminum and steel, the magazine uses minimal plastics in it's operating assembly to give it unparalleled function, and rigidity. Engineered using our proven coil magazine technology, which allows side by side staging of ammo in a single stack. The streamlined design allows for no separation of ammunition during function, preventing malfunctions and lending to it's compact design. Our patent pending tension relief device allows the X-15 Skeletonized to operate nearly unlimited spring loads, allowing it to operate in weapons with capabilities 1100 rounds per minute. The profile is shorter than a standard 30 round magazine and 4-5 inches shorter than a surefire quad stack magazine.  User friendly ergonomics and the ability to use your sling makes this the choice magazine for 3 gun competitors. Coated in Cerakote for friction reduction and proven reliability without using lubrication, and given a liftime warranty. Manufactured in the USA, fit’s most M16/AR-15 rifles, SCAR 16 and Stanang Rifles with improved M4 feed ramps.

Made In The USA

Note: May require modification to work in Robinson Arms XCR, Bushmaster ACR and IMI Tavor.

         

Item Number Price  
X-15SKELETONIZED $299.00

 

ASC 30 Round Aluminum .223 Magazine Rebuild Kit-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

The ASC Rebuild Spring Kit includes 3 Followers, 3 Springs, and 3 Floorplates. Everything you need to rebuild your ASC Magazine.

 

Made In The USA

 

 

 

 

 

 

 

Item Number Price  
ASC.223-AL-REBUILDKIT $11.00

 

ASC 30 Round Stainless Steel .223 Magazine Rebuild Kit-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

The ASC Rebuild Spring Kit includes 3 Followers, 3 Springs, and 3 Floorplates. Everything you need to rebuild your ASC Magazine.

 

Made In The USA

 

 

 

 

 

 

Item Number Price  
ASC.223-SS-REBUILDKIT $12.00

7.62 X 39

 

ASC AR-15 7.62 X 39 Stainless Steel Mag  -Restricted Item -Check Your Local and State Laws Prior To Ordering

-Stainless Steel - Black Finish

-Available in:

 5 Round (10 Round blocked to 5) 

10 Round

30 Round

Made In The USA by ASC LLC

5 and 10 Round

30 Round

Item Number   Price  
ASC7.62X39-5 ASC AR-15 7.62 X 39 Stainless Steel 5 Round Mag $17.00
ASC7.62X39-10 ASC AR-15 7.62 X 39 Stainless Steel 10 Round Mag  $18.00
ASC7.62X39-30 ASC AR-15 7.62 X 39 Stainless Steel 30 Round Mag $20.00

 

6.8 SPC

 

ASC AR 6.8 10 Round Stainless Steel Magazine  -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

-6.8

-10 Round Capacity

-Stainless Steel Magazine

-Made In The USA

 

Item Number Price  
ASC6.8SS-10 $18.00

 

PRI 6.8mm SPC 10 Round Magazine

PRi 6.8mm SPC waffle magazines with push button floor plate are constructed of butt welded steel halves to create the best internal volume for the magazine. We use Magpul anti-tilt follower with spring and push button floor plate allows for magazine to be quickly disassembled for cleaning. The 10 round magazine is 3.7" in length.
This is newer design, we have removed the Waffling from the outer edges of the magazine to quiet down the magazine and reduce follower drag. 

Made In The USA

Item Number Price  
05-6807 $41.00

 

PRI 6.8MM x 43MM 15 Round Capacity Magazine Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

Pri 6.8mm SPC 15 round capacity waffle magazines with pushbutton floor plate and Magpul follower

PRi 6.8mm SPC waffle magazines with push button floor plate are constructed of butt welded steel halves to create the best internal volume for the magazine. We use Magpul anti-tilt follower with spring and push button floor plate allows for magazine to be quickly disassembled for cleaning. The 15 round magazine is 3.9" in length.
This is newer design, we have removed the Waffling from the outer edges of the magazine to quiet down the magazine and reduce follower drag. 

Made In The USA

Item Number Price  
05-6806 $42.00

 

PRI 6.8MM x 43MM 25 Round Capacity Magazine Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

PRi 6.8mm SPC waffle magazines with push button floor plate are constructed of butt welded steel halves to create the best internal volume for the magazine. We use Magpul anti-tilt follower with spring and push button floor plate allows for magazine to be quickly disassembled for cleaning. The 25 round magazine is 7.2" in length.
This is newer design, we have removed the Waffling from the outer edges of the magazine to quiet down the magazine and reduce follower drag. 

Made In The USA

Item Number Price  
05-6805 $43.00

 

ASC AR-15 6.8 SPC Stainless Steel 25 Round Mag  -Restricted Item -Check Your Local and State Laws Prior To Ordering

-6.8 SPC

-25 Round Capacity

-Stainless Steel Mag

-Anti-Tilt Follower

Made In The USA by ASC LLC

Item Number   Price  
ASC6.8-25 ASC AR-15 6.8 SPC Stainless Steel 25 Round Mag $20.00

 

ASC 25 Round 6.8 Magazine Rebuild Kit-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

The ASC Rebuild Spring Kit includes 3 Followers, 3 Springs, and 3 Floorplates. Everything you need to rebuild your ASC Magazine.

Made In The USA

 

 

 

 

 

 

 

Item Number Price  
ACS6.8-REBUILDKIT $14.00

6.5 Grendel

 

ASC AR-15 6.5 Grendel Stainless Steel 25 Round Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

6.5 Grendel

25 Round Capacity

Black Finish

Anti-tilt Blue follower

Made In The USA by ASC LLC

Item Number   Price  
ASC6.5-25 ASC AR-15 6.5 Grendel Stainless Steel 25 Round Magazine $18.00

 

5.45 X 39

 

ASC 5.45 X 39 30 Round Stainless Steel Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

5.45 X 39

30 Round Capacity

Black follower

Black finish

Made In The USA by ASC LLC

Item Number   Price  
ASC5.45X39-30 ASC 5.45 X 39, 30 Round Stainless Steel Magazine $18.00

.308

 

Promag DPMS LR-308 10 Round Mag-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

Fits the DPMS LR-308

Black Phosphate

Made In The USA By Promag

 

 

 

Item Number Price  
DPM 01 $20.00

 

Armalite .308 5 Round Factory Magazine

 

-Fits Armalite AR-10

-.308

-5 Round Capacity

 

Item Number Price  
10607000 $35.00

 

Armalite .308 10 Round Factory Magazine

-Fits Armalite AR-10

-Factory Mag

-.308

-10 Round Capacity

 

Item Number Price  
10607001 $29.00

 

 Promag DPMS LR308 20 Round Mag-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

 

The ProMag steel magazine for DPMS LR-308 or MK11 .308 Winchester is a durable 20-round replacement mag featuring a no tilt follower and black phosphate finish. Will work with LR-308 or SR25 pattern rifles.

Made In The USA by Promag

 

 

 

 

 

 

 

 

Item Number Price  
DPM-A1 $22.00

 

ASC SR-25 .308/7.62x51 10 Round Stainless Steel Magazine

-10 Round Capacity

-.308 / 7.62 X 51

-Stainless Steel

-Black Finish

Made In The USA

 

 

Item Number Price  
ASC.308-10 $19.00

 

ASC .308 SR 25 Stainless Steel 20 Round Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

20 round capacity

Stainless Steel

Black finish, Black Follower

Made In The USA by ASC LLC

Item Number   Price  
ASC.308-20 ASC .308 SR 25 Stainless Steel 20 Round Magazine $19.00

 

DPMS Panther Arms LR308 4 Round Factory Magazine

DPMS Factory 4 Round Magazine compatible with DPMS .243, .260, .308, .338, 6.5 Creedmoor and Remington R-25 rifles.

Made In The USA

 

 

 

Item Number Price  
MA3084 $27.00 Out Of Stock

 

DPMS Panther Arms LR308 10 Round Factory Magazine

These 10 round steel magazines for the Panther Long Range Rifles (.243, .260, .308, .338, 6.5) answer the customer's demand for durable and dependable magazines. Made of heat-treated 1050 steel with a manganese phosphated finish, these steel magazines will withstand the rigors of the hunt. A steel floor plate, spring and follower complete these tough and durable magazines from DPMS. Additionally, these magazines will fit in the Remington R-25.

Made In The USA

 

Item Number Price  
MA3081 $27.00

 

DPMS Factory .308 19 Round Mag-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

DPMS Factory

Fits AR platform in .308

19 Round Capacity

 

Made In The USA

 

 

 

Item Number Price  
MA3082 $28.00

 

Magpul PMAG® 20LR, 7.62x51 Magazine  SR25/M110 -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

The 7.62x51 NATO (.308 Winchester) PMAG 20LR is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles* featuring true 20-round capacity, constant-curve body, and snap on Impact/Dust Cover. Designed specifically for military-issue MK11/M110 rifles and mil-spec ammunition (including M118LR), the PMAG 20LR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself

Features
bulletImpact and crush resistant polymer construction
bulletConstant-curve internal geometry for smooth feeding
bulletSpecially designed, self-lubricating follower for increased reliability
bulletMulti-use Impact/Dust Cover keeps dust and dirt out of the magazine during storage and protects the feedlips from potential hard impact damage during transit
bulletHigh-quality stainless steel spring for corrosion resistance
bulletTextured gripping surface and flared floorplate for positive magazine handling
bulletRobust floorplate for increased drop protection, easily removable for field maintenance and cleaning.
bulletOptimized for use with 7.62x51 NATO (.308 Winchester) ammunition with an overall cartridge length less than 2.820", including M118LR.
bulletAdditional commercial rifle compatibility includes the KAC SR25, DPMS LR308, LWRCI REPR, LaRue Tactical OBR, Bushmaster .308 ORC, Lewis Machine & Tool .308 MWS*, Remington Model R-25, Patriot Ordnance Factory P-308, JP Enterprises LRP-07, and others
 NOT compatible with Armalite AR-10, Noveske N6, Rock River Arms LAR8, FN SCAR 17S or any other rifles that utilize M14 type, FN FAL, or HK 91/G3 magazines.

Made In The USA

Ammo Not Included

Item Number Price  
MAG243-BLK N/A Out Of Stock

 

Armalite AR-10 .308 20 Round Factory Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

-Fits Armalite

-Factory Magazine

-.308

-20 Round Capacity

 

 

 

 

 

 

 

Item Number Price  
10607002 $29.00

 

Armalite AR-10 .308 25 Round Factory Magazine - Gen II-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

The AR-10 25 round magazine is an exciting new addition to our magazine line.  The same efficiency of the 20 round magazine with an additional five rounds for LE users, all in a length just a tad shorter than a 30 round M16 magazine.

Magazines springs for the AR-10, M-15, and AR-30 - Stainless steel, type 17-7 pre-hardened ASTM A313

 

 

 

 

 

 

 

 

 

Item Number Price  
10607003 $43.00

 

AR .308 50 Round Drum Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

 AR10 308 50rd X-Series Drum 

 100% Made in the U.S.A. by XS Products•

Fits All SR25/M110 Magazine Fed Rifles, Including P.O.F, DPMS, Bushmaster, Fulton, JP Rifles, Knights Armament, Remington R-25, LMT and LWRC International Rifles, PWS. Will NOT Fit Armalite

Serious firepower in a small package. The X-25 is a .308 caliber 50 round single stack compact drum designed for AR .308 SR/25 rifles. The magazine easily loads and unloads by operating the front hand wheel. Designed to operate in automatic and semiautomatic applications, it employs a larger hand-wheel and double spring for increased reliability. Unique to this magazine's design is a patent pending feed device that allows the magazine to run massive spring pressures without effecting the firearm's bolt operation. The durable body is constructed entirely of aluminum; and finished in a friction reducing ceramic coating. All internal and operating assemblies are made of black oxide steel and aluminum. Comes with a lifetime warranty and includes an instruction manual. Currently available in black, optional colors coming soon. Please note: That with the wide variance in receiver specs there may need some slight fitting in order to work properly. Please read the owners manual before use.

Made In The USA

Above Drum Is The Skeletonized. Diagram Used For Illustration

Above Drum is the X-FAL. Diagram used for operational instructions.

Item Number   Price  
X-25 AR .308 50 Round Drum Magazine $285.00

 

AR .308  50 Round Drum Magazine- Skeletonized-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

Fits All SR25/M110 Magazine Fed Rifles, Including P.O.F, DPMS, Bushmaster, Fulton, JP Rifles, Knights Armament, Remington R-25, LMT and LWRC International Rifles, PWS. Will NOT Fit Armalite.

When you have a high tech rifle you want a magazine to compliment it. These are built from the same quality materials as our other magazines but have a 3 dimensional cut that allows you to see the ammunition pass through. To enhance the overall look we've included blood red anodized internals and custom engraving that embraces the mad men in all of us with non the less the Jolly Roger, aka the skull and cross bones.

Same as above drum #X-25, except it is skeletonized for looks. 

Made In The USA

 

 

Above Drum is the X-FAL. Diagram used for operational instructions.

Item Number   Price  
X25-S AR .308 50 Round Drum Magazine- Skeletonized $330.00 Out Of Stock

 

XS-Products Armalite AR10 .308 50 Round Drum Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

Serious firepower in a small package. The X-10 is a .308 caliber 50 round single stack compact drum designed for Armalite .308 rifles. The magazine easily loads and unloads by operating the front hand wheel. Designed to operate in automatic and semiautomatic applications, it employs a larger hand-wheel and spring for increased reliability. Unique to this magazine's design is a patent pending feed device that allows the magazine to run massive spring pressures without effecting the firearm's bolt operation. The durable body is constructed entirely of aluminum; and finished in a friction reducing ceramic coating. All internal and operating assemblies are made of black oxide steel, aluminum with a high impact, glass filled nylon follower set. Comes with a lifetime warranty and includes an instruction manual. Please note: That with the wide variance in receiver specs there may need some slight fitting in order to work properly. Please read the owners manual before use.

Fits Armalite Only

Made In The USA

Item Number Price  
X-10 $285.00

 

X-Products .308 Drum Single Loop Pouch

Works with all X 308 50 round drums. This Pouch is Designed to fit X-Series drum magazines in .308/7.62x51, X-91, X-FAL, X-25, X-14, X-FNAR, X-SCARH/X-FALX, X-Saiga, X-10.Designed with a single loop.  Magazine pouch is proudly manufactured in the USA.

Item Number Price  
X-SingleLoopPouch $43.00 Out Of Stock

 

X-Products .308 Drum Molle Pouch

Works with all X 308 50 round drums. This Pouch is Designed to fit X-Series drum magazines in .308/7.62x51, X-91, X-FAL, X-25, X-14, X-FNAR, X-SCARH/X-FALX, X-Saiga, X-10.Designed for flexible attachment with MOLLE modular lacing. M.O.L.L.E. Modular Lightweight Load-carrying Equipment. Magazine pouch is proudly manufactured in the USA.

Item Number Price  
X-MOLLEPOUCH $70.00

 

X-Products .308 Drum Dual Shoulder Sling Pouch

Works with all X 308 50 round drums. This Pouch is Designed to fit X-Series drum magazines in .308/7.62x51, X-91, X-FAL, X-25, X-14, X-FNAR, X-SCARH/X-FALX, X-Saiga, X-10.Dual should sling version.  Magazine pouch is proudly manufactured in the USA.

Item Number Price  
X-DualSlingPouch $80.00

9mm

ASC AR 9mm 32 Round MagazineRestricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

ASC Stainless Steel 9 MM magazines are an improvement on the Colt style classic AR magazine. Engineered with the highest levels of quality for confidence and 100% reliability, simply the best in the industry!  Our magazines are manufactured  100% start to finish in the USA formed out of 410 Stainless Steel Alloy .052 gauge for superior strength and  lasting endurance.  Our magazines are chemically treated for corrosion resistance [ref QQ-P-35] integrated with our proprietary coating, a high grade Marlube which is a wear-in not wear-off coating that burnishes in the surface providing self-lubricating properties.  The interior dimensions of OAL 2.316” ± .002 are perfect for reloads.  From first to last… rounds feed flawlessly through our 9 MM magazines.

ASSEMBLY COMPONENTS

bulletChrome Silicon Springs
bulletEnhanced Anti-tilt Polymer Followers
bullet410 Series SS Retainer Plate and Floor plate-  Powder coated Matte Black

Made In The USA

Item Number Price  
ASC9MM-32 $19.00

 

C-Products AR-15 9mm 32 Round Steel Mag -Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions


Fits AR-15 chambered in 9mm

Stainless Steel Mag

32 Round Capacity

Orange Follower 

Manufactured in the USA by C-Products

Made In The USA

 

Item Number Price  
CPAR9MM-32 $19.00

 

5.7 X 28

 

PW Arms AR57 5.7X28 50RD Dark Translucent-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

-Fits the AR57 / FN-PS90 / P90

-5.7X28

-Dark translucent

Item Number Price  
AR57-50M-2 $30.00

 

.22LR

CMMG AR .22LR 10 Round Limited Magazine, 22ARC, 25R3-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

 

The 25R3 magazine compatible with Bolt Hold Open Adapter that has been pinned to limit capacity to 10 rounds.

 

 

Made In The USA

 

 

 

 

Item Number Price  
22AFCD4 $21.00

 

CMMG ARC-22 25 Round Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

- .22LR
- 25 Round
- Polymer

Made In The USA

 

 

Item Number Price  
22AFC25 $20.00

 

American Tactical Imports AR-22 .22 LR 28rd Black Polymer Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

-Fits Chiappa M4-22 Upper

-22LR

-28 Round Capacity

 

 

 

 

Item Number Price  
MG42228 $25.00

 

CMMG Evolution .22LR Long Skins Flat Dark Earth 25 Round Magazine-Restricted Item -Check Your Local and State Laws Prior To Ordering

See Shipping & Policies For List Of Restrictions

-Fits Evolution

-.22LR

-25 Round Capacity

 

Made In The USA

 

 

 

Item Number Price  
22AFC40 $30.00

 

AR-15 Magazine Covers
Fits .223. Black rubber cover slips on mag. Keeps ammo dry and dust free. Also protects mag feed lips. Easily slips-on magazine. 

Set Of Four


Made In The USA

 

 

Item Number Price  
AR15223 $7.00
 

 

 

Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

 

 

Can't find what you are looking for???  Contact Us  with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes. 

  2014, The Country Shed

RESTRICTED ITEMS   Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed  does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws.  You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area.  Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle,  Handgun, Pistol, Assualt  Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers,  UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate,  MAKO,  Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!