Operation

Optics: Transmission holography – 100% parallax free

Magnification: 1x unlimited eye relief

Length/Width/Height: 4" x 1.8" x 2.25" (102 x 49 x 60 mm), 'AA' model: 5" x 1.8" x 2.25" (131 x 49 x 60mm)

Weight: 8.8 ounces (250 grams), 'AA' model: 11.5oz (326 grams)

Temperature: -20 to 150F (operating); -40 to 160F (storage)

Sealing: Waterproof (submersible) & fogproof

Color/Finish: Non-reflective black with hard coat finish

Adjustment (per click): 0.5" at 100 yards

Adjustment Range: +/- 40 MOA travel

Mount: 1" 1" Weaver dovetail/Picatinny rail (Mil spec 1913)

Return to Zero: Repeatable to 1 MOA after remounting

Heads-Up Display Window

Optical Surfaces: Anti-glare and scratch resistant coatings

Window Dimensions: 1.20" x 0.85" (30 x 23 mm)

Window Material: Shatterproof laminate (3/16" thick)

Field of view (100 yards): 30 yards (28m) at a 4" eye relief

Standard Reticle: 65MOA ring with quadrant ticks with a 1MOA Aiming dot

Reticle Contrast Ratio: 28,000:1 brightest to lowest

Night Vision Contrast Ratio: 10,000,000:1 with NV switch engaged

Electrical

Power Source: Universally available AA batteries (supports lithium, alkaline or rechargeable)

Optional Power Source: "N" Alkaline batteries (camera-type batteries, available most anywhere)

Battery Life: "N" type: 200 hours, AA batteries: 600 hours, AA Lithium: 1100 hours

Brightness Settings: 20 settings with scrolling feature

Auto Battery Check Indicator: Flashing reticle upon startup if batteries are at 20% of battery life.

Auto Shutdown: At 8 hours – programmable to 4 hours

Night-vision Compatibility

Tandem operation with Generation I - IV N.V. tubes
Toggle Switch with 10 settings (immediate drop to Night-vision mode)

As we continue to enhance our products, specifications are subject to change

M16/AR15 Cantilever Co-witness Mount

Sight co-witnesses front and rear iron sights. Operator maintains a cheekweld position. Iron sight axis typically positioned in lower 25% of the sight's heads-up display window. Cantilever mount attaches with finger operated nut to carry handle. The mount is machined from 7075 aluminum with an anodized, flat black finish. Order code: EOT9ARMS2EXT

M16/AR15 Carryhandle Mount

Sight is positioned on top of carry handle, providing unlimited field of view. Can be used with night vision goggles or gasmask peripherals. User maintains access to iron sights Meets MIL Spec 1913.

Order code EOT9ARMS2

M16/AR15/M4 Flat Top Co-witness Mount

Sight is positioned in front of flip-up rear sight and maintains co-viewing feature. Iron sight axis typically positioned in lower 25% of the HOLOsight's heads-up display window. Mount platform easily slips on top of A3 or M4 flat top receivers, using a locking side bar with two Allen head screws (wrench included). Mount platform provides positive and straight lockup even on worn receiver rails. Meets MIL Spec 1913.

Order code EOT9GGGA2FL

M16/AR15/M4 Co-witness Mount

Operator maintains a cheekweld position. The mounting system allows you to adjust the height of the optic to the proper level for co-viewing with your iron sights. Iron sight axis typically positioned in lower 25% of the sight's heads-up display window. Order code: EOT9BCCAM

MP5 Mid Range Profile Mount

Sight is mounted in mid-range position off upper receiver for Heckler & Koch assault rifles. Designed to fit all variations of MP5 as well as the HK91/93/94. Mounting system allows complete access to diopter and ghost rings. It has a toolless mounting interface with knurled knob that locks solidly on the upper receiver in less than 30 seconds. The mount is machined from 6061 aluminum with an anodized flat black finish. Order code: EOT9BT2156

MP5 Low Profile Mount

Sight is mounted in a low-profile position off upper receiver for Heckler & Koch assault rifles. Operator maintains a cheekweld position. Designed to fit all variations of MP5 as well as the HK91/93/94. Mounting system is an erector-based kit that locks solidly to the upper receiver within minutes. When the sight is not mounted, the user maintains access to the iron sights. Order code: EOT9BT21262

Additional Mounts

Various other mounting platforms are supported for the HK, MP5, UMP45, G36, the Sig 550, FN P90 or FAL and Remington, Benelli, and Mossberg tactical shotguns. Each of these platforms allow access to iron sights (with sight mounted), maintenance of critical cheekweld position, and achieve maximum peripheral vision for the operator.

The HWS also interfaces to a host of machine gun platforms including FN’s M240, 249, the M2/M3 and Minimi.