Mini-14, Mini-30, Ranch, Rifle, M1 Carbine, Tri-rail Barrel Mounts, Compensators, Brass Catchers,  Drums, Stripper Guides, Butt Pads, Recoil, Choate, Ruger, E&L, Buffer Tech, Recoil Buffer, Blued, Stainless Steel, M14 Look A Like, Barrel Shroud, Ventilated, Foregrip, Manual, Assembly, Disassembly, Clip, Magazine, Replacement, Round, 20, 30, 40,  High Capacity, Law Enforcement, Accessory Mount

Sturm Ruger Mini-14 Original Factory Mags Cannot be shipped to CA, HI, MD, MA, NJ, CT or NY Check Your Local and State Laws Prior To Ordering Available for the Mini-14 .223 20 Shot Factory Original Mag- NOT AFTERMARKET 30 Shot Factory Original Mag- NOT AFTERMARKET Blued SALE!! SALE!!!! SALE!!! LIMITED TIME
Item Number	Description	Price
MAG/20	STURM RUGER MAGAZINE FOR MODEL MINI-14, 20 ROUND, BLUE	SALE $45.00 WAS $53.00
NEW!! 90035	STURM RUGER MAGAZINE FOR MODEL MINI-14, 30 ROUND, BLUE VERY LIMITED QUANTITY	SALE $47.00 WAS $64.00

Ruger Mini-14 .223 20, 30, & 40 Round Replacement Mags Cannot be shipped to CA, HI, MD, MA, NJCannot be shipped to CA, HI, MD, MA, NJ, CT or NY Check Your Local and State Laws Prior To Ordering Replacement Mags,  Blued Steel Cannot ship to CA, HI, MA, MD, NJ, or NY
20 Round	30 Round	40 Round

Mini-30 7.62X39 30 Round Mag Cannot be shipped to CA, HI, MD, MA, NJ Check Your Local and State Laws Prior To Ordering -Fits Ruger Mini-30 -30 Round Capacity -7.62 X 39 -Black Polymer -Replacement Mag -Made in the USA by Promag
Item Number	Description	Price
RUG-A12	Promag Mini-30 7.62 X 39 30 Round  Mag	$25.00

Mini-30 7.62X39 15 Round Blue Mag Cannot be shipped to CA, HI, MD, MA, NJ Cannot be shipped to CA, HI, MD, MA, NJ, CT or NY Check Your Local and State Laws Prior To Ordering -Fits Ruger Mini-30 -15 Round Capacity -7.62 X 39 -Blued -Replacement Mag
Item Number	Description	Price
NATM3015	Mini-30 7.62 X 39 15 Round Blue Mag	$16.00	Out Of Stock

Buffer Technologies Ruger Mini-14 / 30  Recoil Buffer The Mini-14/30 Recoil Buffer™ works the same as the M1A/M14 Buffer, by eliminating the op rod contact with the receiver. The Mini-14/30 Recoil Buffer™ will protect your operating rod, the weak link in the system, from excessive shock. With a Recoil Buffer™ installed you'll have less felt recoil, more muzzle stability, less action noise, and will extend the service life of your weapon  The Mini-14/30 Recoil Buffer™ fits onto the recoil spring guide rod. As with all other models of the Recoil Buffer™, installation is simple and can be done without any special tools. The Mini-14/30 Recoil Buffer™ differs from others in our line of products, in that it does not end the metal to metal contact of the bolt to receiver. For a Mini-14/30 or M1A/M14 to operate reliably, the bolt must impact the receiver with each firing of the weapon. This contact is required to prevent excessive stress on the roller cam on the side of the bolt. not fit series numbered 1801-1809.)
Item Number	Price
RM14	$14.50

 

UTG Mini-14 Sight Tool Detail Information: • Precision Steel Part • With Pin Depressors to Quickly Adjust the Rear Sight of Mini-14 Conventional Models for Both Windage and Elevation
Item Number	Price
SCO-RG440	$8.00

 

Choate Mini-14 Stainless Steel (Blued Pictured to right) Choate Recoil Compensator for Mini-14 made of solid steel, bath blued or S.S. Both models sight looks like the original M-14 Sight. The compensator is permanently attached to the gun barrel by a 1/8 inch spring steel roll pin. We suggest this unit be installed by a gunsmith.
Item Number	Price
07-07-13	$53.00

 

Choate Mini-14 Blued Choate Recoil Compensator for Mini-14 made of solid steel, bath blued or S.S. Both models sight looks like the original M-14 Sight. The compensator is permanently attached to the gun barrel by a 1/8 inch spring steel roll pin. We suggest this unit be installed by a gunsmith.
Item Number	Price
07-07-12	$50.00

 

Choate M14 Look-a-Like- Blue For The Mini-14 Choate Recoil Compensator for Mini-14 made of solid steel, bath blued or S.S. Both models sight looks like the original M-14 Sight. The compensator is permanently attached to the gun barrel by a 1/8 inch spring steel roll pin. We suggest this unit be installed by a gunsmith.
Item Number	Price
07-07-14	$50.00

 

Choate M14 Look-a-Like Stainless Steel For The Mini-14 Choate Recoil Compensator for Mini-14 made of solid steel, bath blued or S.S. Both models sight looks like the original M-14 Sight. The compensator is permanently attached to the gun barrel by a 1/8 inch spring steel roll pin. We suggest this unit be installed by a gunsmith.
Item Number	Price
07-07-15	$53.00

 

Mini-14 Muzzle Brakes - Pin On
Mini-14 Long Stainless Steel		Mini-14 Long Blue
Item Number	Description	Price
MIN14BL	Mini-14 Blue Muzzle Brake	$12.00
MIN14SS	Mini-14 Stainless Steel Muzzle Brake	$15.00

 

Mini-30 Muzzle Brakes - Pin On
Mini-30 Long Blue		Mini-30 Long Stainless Steel
Item Number	Description	Price
MIN30BL	Mini-30 Blue Muzzle Brake	$12.00
MIN30SS	Mini-30 Stainless Steel Muzzle Brake	$15.00

 

E&L Mini-14 Barrel Shroud with Ambidextrous Foregrip  The E&L Ventilated Barrel Shrouds, or Non-Ventilated Barrel Shrouds are constructed of aircraft aluminum with a hard black satin finish. The ventilated barrel shrouds feature oval-shaped holes giving the firearm a machine gun look while the Non-Ventilated Barrel Shroud gives the appearance of a suppressor equipped weapon. The Ambidextrous Vertical Foregrip is constructed of high-impact plastic and can swivel to any desired angle. The barrel shrouds can be attached with or without the Vertical Foregrip and come complete with all necessary hardware.
Barrel Shroud Ventilated with Ambidextrous Foregrip
Item Number	Description	Price
201	E&L Mini-14 Barrel Shroud Ventilated with Ambidextrous Foregrip	$40.00

 

Ruger Mini-30 Barrel Shroud with Ambidextrous Foregrip  The E&L Ventilated Barrel Shrouds, or Non-Ventilated Barrel Shrouds are constructed of aircraft aluminum with a hard black satin finish. The ventilated barrel shrouds feature oval-shaped holes giving the firearm a machine gun look while the Non-Ventilated Barrel Shroud gives the appearance of a suppressor equipped weapon. The Ambidextrous Vertical Foregrip is constructed of high-impact plastic and can swivel to any desired angle. The barrel shrouds can be attached with or without the Vertical Foregrip and come complete with all necessary hardware.
Barrel Shroud Ventilated with Ambidextrous Foregrip
Item Number	Description	Price
206	E&L	$40.00

 

UTG Mini 14 / Mini-30 Tactical Metal Quad-rail Handguard  Precision Machined from Aircraft Grade Aluminum for Maximum Strength 20 Top Slots, 11 Left and Right Side Slots and 10 Bottom Slots Features Innovative Double Locking System with Zero-Gap Tight Tolerance for Most Secure Fit Great Zero Retention Capability for All Accessories Installed on the Rails Intensively Tested by Field Experts and Demonstrates Most Satisfactory Performance Friendly Installation, No Gunsmithing Required	MNT-HG214QR
MNT-HG214QR shown right on gun with additional accessories not included (Gun, Scope, Bipod, Flashlight, Grip, Scope mount with Rings, ect.).
Item Number	Price
MNT-HG214QR	$60.00

 

Tri-Rail Barrel 2 Slot Mount For AK-47, SKS, Mini-14 or any Rifle with Barrel Size 3 –20 mm (0.51 Inch to 0.787 Inch)   Universal Tri-Rail Barrel Mount Complete with Laser Clamping Feature - Each Rail with 2  Slots Fits Rifle Barrel From 13 –20 mm (.512”-.787”)
Item Number	Price
MNT-BR002	$20.00

 

Deluxe Tri-Rail Barrel 5 Slot Mount For AK-47, SKS, Mini-14 or any Rifle with Barrel Size 3 –20 mm (0.51 Inch to 0.787 Inch) Universal Tri-Rail Barrel Mount Complete with Laser Clamping Feature - Each Rail with 5  Slots Fits Rifle Barrel From 13 –20 mm (.512”-.787”)
MNT-BR005 Shown Above on AK-47 and SKS with lasers, flashlights, and grips.		MNT-BR005 Shown Above on Mini-14 and HK with lasers and flashlights.
Item Number	Price
MNT-BR005	$27.00

 

Ruger Mini-14 StripLULA™ The Mini-14 StripLULA™ is designed to fit original    Mini-14   5.56 / .223 magazines. .223 caliber ammo on stripper clips can now be loaded in your magazine with unmatched speed - 30 rounds in 12 seconds! The Strip LULA is the fastest, easiest-to-use strip loader on the market, and it fits in your pocket. • The quickest simplest strip loader available today • Ultra compact - 1/3 the size of similar loaders • For Ruger Mini-14 Original Factory Mags • Durable reinforced polymer. • No finger pain or injury. It may fit some aftermarket Mini-14 mags. but this is not guaranteed. The Mini-14 StripLULA™ will NOT load properly: - 6.8mm SPC rounds - ProMag Mini-14 magazines (the ProMag's attachment slits are made for M16 couplers/spoons). Use the M16 StripLULA™ for these mags. - Nickel-plated Mini-14 magazines (the mags are not designed exactly as the Ruger mags). Try the M16 StripLULA™ for these mags. - M16 / AR15 type magazines (the mags are not designed exactly as the Ruger mags). Use the M16 StripLULA™  or LULA™ for these mags. !		Ammo & Mag Not Included
Item Number	Price
24201	$24.00

 

Mini-14 Stripper Clip Guide Speed load your Mini-14 .223 mags. This guide allows you to use .223 stripper clips (not included) to load your Mini-14 mags.
Item Number	Price
TL-RGR445	$5.00

Complete Guide to the Ruger Mini-14, Mini-30 and Deerfield Carbine RUGER COMPLETE GUIDES Mini-14, Mini Thirty, & Deerfield Carbine (2006)
FEATURES: •  The only current printed manual that includes information on    ALL models from 1972 ~ 2006. •  Includes all serial numbers and manufacture dates for    all models from 1972 ~ 2004! •  Easy to use -- Comb binding lies open and flat on your work surface. •  56 pages & 66 high-resolution grayscale images. •  Cardstock cover. Bright white paper.		CHAPTERS   Safety Safety tips The Mini-14 The Mini-14 Ruger's Description Standard Mini-14 Ranch Model Other Mini's Current Models Operational Background Safety Bolt Lock Load Magazine FIRE Unload Jams-Malfunctions Bore Obstructions Standard Sights - Elevation Standard Sights - Windage Ranch Sights - Elevation Ranch Sights - Windage Disassembly Disassembly Field Stripping Trigger Group Barrel and Receiver Standard Recoil Spring Ranch Recoil Spring Slide Standard Bolt Stop Ranch Bolt Stop Ranch Bolt Stop Assembly Complete Disassembly Reassembly Accessories Introduction Magazines Magazine Check List Slings Stocks Scopes Other Accessories Reference Parts - Standard Upper Parts - Standard Lower Parts - Ranch Upper Dates of Manufacture: 1972 ~2004
Excerpt from this Ruger Guide: The Mini-14 At first glance the Mini-14 looks very similar to a combination of a M1 Garand Rifle’s rotating bolt and the overall appearance of the US Military M14. The M1 Garand (.30.-06 caliber) was adopted by the US Army in 1932 and was carried by most US troops until the 1950’s. The M14 (.308 caliber) was adopted by the US Army in 1957 and was later replaced by the current AR-15/M-16 rifle. (.223 / 5.65mm caliber). Design and Series of the Mini-14 The Ruger Mini-14 was designed by Bill Ruger. Early versions from 1972 ~ 1975 were produced in Southport, Connecticut and have serial numbers with the three digit prefix of “180”. The Ruger Mini-14 180 series have a few minor internal and external design changes that make it incompatible with most of the commercial and aftermarket accessories that are specifically made for the later 181 and 182 series rifles. These early 180 series rifles are sought after by collectors. Most “shooters” prefer the later models. The Ruger Mini-14 series 181 was introduced in 1977 and offered an updated rear site, a larger gas piston, magazine release, and a modified bolt mechanism. In 1980 Ruger added a series 182 which introduced a new satin finish to the Mini-14. Early stainless steel receivers were recalled due to cracking because of excessive hardening of the metal during production. Recalled stainless guns had a serial number below 182-51929. Ruger Rifles that have been repaired have two proof marks. (“R” in circle.)
Item Number	Description	Price
GGRugerMiniComplete	Complete Guide to the Ruger Mini14/30	$15.00

M1 Carbine Butt Pad Adds 1" of length to all versions of M-1/30 carbine. Prevents slip and softens recoil. Easy to install. No drilling or tapping required. Comes quantity one per pack. Two are pictured left.
Item Number	Price
RB-MC040	$8.00

Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

We ship to APO addresses!!!!        We ship to APO addresses!!!!

Can't find what you are looking for???  Contact Us  with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes. $15 Minimum Order

  2008, The Country Shed

RESTRICTED ITEMS   Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed  does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws.  You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area.  Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Notice: We do not ship high capacity magazines and drum magazines to MD, CA, NJ, HI, DC, NY, MA, CT and RI. Please do not order these item if you live in these areas.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle,  Handgun, Pistol, Assualt  Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers,  UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate,  MAKO,  Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!