The Country Shed 

Mounts and Scopes Tactical Shotgun Meat Processing Heated Gloves & Socks SAKO Tikka Beretta
Holsters Rifle Bases

Fishing Equipment

Handgun / Pistol

DVD's and CD's

Rifle Stocks High Capacity Magazines Tools Books Sling Shots
Flashlights & Lasers Shotgun Stocks Survival Gear

Special Closeouts

General Accessories

Home Contact Us Ordering Shipping & Policies Links What's New & Hot Gift Ideas Join Email List Special Closeouts

 

 

 

Mini-14 / Mini-30, M1 Garand, and M14 Scope Mounts

Mini-14, Mini-30, Ruger, Scout Mount, Scout, Scopes, See Through, Scout, Amega Ranges, Ultimak, UTG, Leapers, S&K, Picatinny Rail, M4-B, M5-B, MNT-214, MNT-214D, Law Enforcement, Hunting,  Ranch, Blues, Stainless Steel 
Amega Ranges Mini-14 / Mini-30 Scout Mount

  

AmegaScout1 (Blued)

bullet
No permanent modifications required- The bolt-on design replaces the hand guard and upper gas block using the two Allen wrenches provided. No drilling, cutting, machining or other modification to the rifle is required. Just field strip your Mini-14™ and follow the simple installation instructions.

bullet
Fits the Ruger® Mini-14™ or Mini-14 Ranch Rifle™and the Ruger AC 556- This is a bolt-on unit that fits either version of the .223 cal. Rifle 

bullet
Precision machined and extruded aircraft-grade aluminum- This was the best material available to meet our stringent design criteria. It provides a balance of strength and rigidity at a moderate weight (less than 10 ounces).

bullet
Full-length sight base- Accepts Weaver™ style or Picatinny rings and runs the entire length of the top of the mount.

bullet
Flat non-reflective, hard anodized finish- The dull, matte finish reduces shine and glare while hard anodizing provides protection from corrosion and wear.

bullet
Accepts modern tactical sight systems (ACOG, CQB, Holosights, etc.), Pistol or Scout scopes- More sighting options than ever before along the full length base.

bullet
Does not interfere with OEM sights- The ample sighting groove on the top of the base allows a clear field of view for use of open sights when scopes or other sighting devices are not attached.

bullet
Improved accuracy with every load tested- The rigid construction and unique design create several points of contact with the barrel that produce a stiffening effect, reducing barrel vibration and “whip” resulting in a noticeable reduction of group size with every load of .223 ammunition tested so far.
ALL Mini-Scout-Mounts™ share these features
bullet

Bolt-on design with NO permanent modifications required - No drilling, cutting, machining or permanent modifications are made to the rifle.

bullet

Full-length sight base accepts all modern tactical sight systems (red dot, Pistol or Scout scopes).

bullet

Precision extruded and machined aluminum alloy provides a balance of strength and rigidity at a moderate weight.

bullet

Flat non-reflective, hard anodized finish reduces shine and glare while providing protection from corrosion and wear.

bullet

Does not interfere with OEM sights when scopes or other sighting devices are not attached. 

bullet

Tactical Light Mount Kits allow mounting of flashlights, lasers, etc. and can be positioned for easy access by right or left-handed shooters. Create a tri-rail mount!!! (Tactical Light Kits Sold Separately)

bullet

Improves accuracy with most rifle/ammunition combinations.

bullet

Made in the USA

Do I have a GB Sidefolder and need #AMEGASCOUT7?

The typical Mini-14 sling swivel is mounted on the bottom of the lower gas block assembly.  The GB side folder has the sling swivel mounted on the SIDE of the lower gas block assembly.  These were fairly rare on Mini-14's, but standard on the AC-556 (full auto Mini-14). This side-mounted sling swivel prevented the standard Mini-Scout-Mount-14 from attaching, so we made a modification (machined a slot) to the mount body that allowed the swivel to clear.  Note that it will still work on the regular Mini-14.  

How Do I Know Which Barrel I have??? 

Take a look at the below pictures. 

Tactical Light Kits -Sold Separately Below- Mount Will Accept 2 Rails

Item Number Description Price  

AMEGAScout1

Amega Mini-Scout Mount for Old Ruger Mini-14.Blue,  Fits AC556 also. Will NOT fit the new Ruger Mini-14 Target, Mini-6.8, or Mini-14 GB.  All of these rifles have the "new" Ruger barrel profile that is heavier and features a shoulder just in front of the Gas Block Assembly

$139.00

AMEGAScout2 Amega Mini-Scout Mount for New Ruger Mini-14/30/6.8 Blue. Will Fit  AC556, all three caliber versions of the 580 and up series (.223, 6.8spc, and 7.62x39) with the heavier flanged barrel.  It will also fit the Target Models with barrel tuners. $150.00

AMEGAScout7

Amega Mini-Scout Mount for Old Ruger Mini-14 GB Side Folder. Blue,  Fits Old For new models, see AmegaScout2 above $150.00 Out Of Stock

AMEGAScout8

Amega Mini-Scout Mount for Old Ruger Mini-30 Blue. Will NOT fit the new Ruger Mini-14 Target, Mini-6.8, or Mini-14 GB.  All of these rifles have the "new" Ruger barrel profile that is heavier and features a shoulder just in front of the Gas Block Assembly For new models, see AmegaScout2 above $160.00

Standard Weaver and Short Picatinny Light Kits shown. Screws included. #AMEGATLK

Long Picatinny #AMEGALPLK

 

Mount Shown With Light Holder and Flashlight (not included)

Amega Ranges Tactical Light Kit

Sold Separately Below- Mount Will Accept 2 Rails

For the Ruger Mini-14, M1-Garand, and M1/M1A

Provides an easy way to add additional Picatinny/Weaver equipment mounting rails to the Amega Mini-Scout mount.

This accessory fits all models of the Mini-Scout-Mount™ allowing the shooter to quickly attach most makes of tactical flashlights, laser sights, IR illuminators, and other accessories.  It is easily installed on either side for right or left-handed shooters (or both sides for two accessories)  and in different positions for use of larger accessories. It is secured to the mount body with two screws and the wrench provided. 

Choose between the Mil-Std 1913 Picatinny (standard or long length) or the Glock® style which accepts Weaver style rings.  

The Mil-Std 1913 Picatinny standard length measures 2.0 inches; the Mil-Std 1913 Picatinny long length measures 3.95 inches

Order Number Description Price  

AMEGATLK

Amega Standard Weaver Tactical Light Mounting Kit fits Mini-14, M1 Garand, and M14/M1A Amega Scout Mounts. One Rail Only

SALE!!! $18.00 WAS  $19.00

AMEGAPLK Amega Short Picatinny Rail Tactical Light Mounting Kit fits Mini-14, M1 Garand, and M14/M1A Amega Scout Mounts. One Rail Only $20.00
AMEGALPLK Amega Long Picatinny Rail Tactical Light Mounting Kit fits Mini-14, M1 Garand, and M14/M1A Amega Scout Mounts. One Rail Only $30.00

 

Amega Ranges Tactical Sling Mount Adaptor

This rugged accessory provides a low-profile sling mounting point for 1.25" web slings and has a .25" hole for H&K type quick detachable sling snaps. It can be mounted under the Tactical Light Mount Kit or alone on the left or right side of any model of Mini-Scout-Mount™.

Made of durable blued steel, it installs quickly and easily with the screws and tool provided. This is a quick and easy way to set up your sling for traditional over the shoulder carry, or in a tactical cross chest-muzzle down position. Weight 1.0 oz.

For Use on the Amega Ranges Scout Mounts - Sling NOT included

Item Number   Price  
TSMA Amega Ranges Tactical Sling Mount Adaptor $20.00

 

Amega Ranges Detachable Sling Mounting Kit

This exceptionally handy accessory provides a convenient sling mounting point for all standard quick detachable sling swivels. It will fit on any model of Mini-Scout-Mount™ on either the left or right side, and is easily attached with the tool provided. This is a quick and easy way to set up your sling for traditional over the shoulder carry, or in a tactical cross chest-muzzle down position.

Made with an anodized aluminum body, blued steel swivel stud and screws, and tested to support over 200 lbs. Weight 0.75 oz.

For Use on the Amega Ranges Scout Mounts - Sling NOT included

                                

Item Number Price  
DSMK $25.00

 

UltiMAK Ruger Mini-14 Scope Mount
Weaver/Picatinny standard spec rail

(Model# M4-B) 

Fits 180 series thru year 2007 rifles with standard barrel,
standard and Ranch models. (.223 only) 

Ruger Mini-14 Scope Mount
Weaver/Picatinny standard spec rail

Clamps directly to barrel for maximum stability and accuracy. Enables use of Intermediate Eye Relief (IER) telescopes, reflex sights, and holographic weapon sights. Comes complete with 6 screws, clamp, Allen wrenches, and easy instructions. No gunsmithing or alterations required. Requires original factory standard barrel profile.
Fits 180 series through circa 2007 production.
Will NOT fit 2008 and later production rifles - see below*

CNC machined from 2024 aluminum billet.
Cerakote Graphite Black finish.
Made In The USA

Forward, low mounting configuration with the enhanced versatility of a standard mounting rail. Since the M4-B clamps directly to the barrel and does not interface with the stock in any way, it fits with any aftermarket Mini-14 stock we know-- wood or synthetic, fixed, collapsible, or folding.

 

 

 

Mini-14 Scope Mount

Mini-14 Accessories

Mini-14 Scope Mount

Ruger Mini-14 Mount

In this photo, you see that the barrel comes straight out from the gas block with no visible taper. The UltiMAK M4-B fits these .223 barrels nicely:

Mini-14 Scout Mount

The M4-B will NOT fit these barrels

*The 2008 and later Mini-14s have a heavier barrel with a distinct taper just in front of the gas block. The M4-S is designed to fit these barrels. You can clearly see the taper in front of the gas block in this Photo. The M4-B will NOT fit these barrels, and in that case you want M4-S

Item Number Price  
M4-B $139.00

 

UltiMak Optic Mount for new production Ruger Mini-14 and Mini-30 Picatinny style rail (also fits Weaver)
(Model# M4-S) Clamps directly to barrel for maximum stability and accuracy. Enables use of Intermediate Eye Relief (IER) telescopes, reflex sights, and holographic weapon sights. Comes complete with screws, clamp, Allen wrenches, and easy instructions. No gunsmithing or alterations required. Requires factory standard barrel profile. Must be used with tip-on optic/rings. Cerakote Graphite Black finish.
Also fits Mini-30s, from early production to present.
Fits Mini-14s made since circa 2008.

Made In The USA

Mini-14 Scope Mount

Taking the functional utility of the Mini-14 to the next level, the new UltiMAK M4-S is the lowest, most stable forward mount available. Perfect for mounting reflex and holographic sights, or intermediate eye relief "Scout" scopes, the forward positioning allows faster targeting with better field of view, greater mounting versatility, and maintains full access to the receiver mechanism with optics in place. The MIL STD 1913 (Weaver/Picatinny) rail sits lower than the original Ranch receiver mounts. This provides a better, more natural cheek weld for rapid target acquisition. Due to the lower iron sights on the new Mini, this setup will not co witness. No-gunsmithing installation. Completely CNC machined from super strong 2024 Mil Spec hard anodized aluminum. - UltiMAK - Make Every Shot Count

New Mini-14 Scope Mount

Mini-14 Scout Mount

The 2008 and later Mini-14s have a heavier barrel with a distinct taper just in front of the gas block. The UltiMAK M4-S is designed to fit these barrels. You can clearly see the taper in front of the gas block in this Photo

Ruger Mini-14 Mount

The M4-B will NOT fit these barrels

In this next photo, you see that the older .223 barrel comes straight out from the gas block with no visible taper. In that case you want the M4B

Mini-14 scout scope mount

Item Number Price  
M4-S $139.00

 

UltiMAK Ruger Mini-30 Scope Mount
Weaver/Picatinny standard spec rail

Clamps directly to barrel for maximum stability and accuracy. Allows use of Intermediate Eye Relief (IER) telescopes, reflex sights, and holographic weapon sights. Comes complete with 6 screws, clamp, Allen wrenches, and easy instructions. No gunsmithing or alterations required. Requires original factory barrel profile.
Fits early Mini-30s through circa 2007 production.
Made In The USA

Mini-30 Scope Mount

Forward, low mounting configuration with the enhanced versatility of a standard mounting rail. This shows the M5-B on a stainless Mini-30. Since the M5-B clamps directly to the barrel and does not interface with the stock in any way, it fits with any aftermarket Mini-30 stock we know-- wood or synthetic, fixed, collapsible, or folding.

Mini-30 Scope Mount

Not just another "also fits Mini-30" afterthought. The UltiMAK M5-B is designed for Mini-30s produced from the beginning of production, through circa 2007. This is by far the lowest, most stable forward mount available for the Mini. The forward positioning allows faster targeting with better field of view, greater mounting versatility, and maintains full access to the receiver mechanism with optics in place. The MIL STD 1913 (Weaver/Picatinny) rail sits lower than the factory receiver mounts. This provides a better, more natural spot weld for rapid target acquisition, and natural point of aim. Allows co witnessing of iron sights with tube bodied, reflex sights. No-gunsmithing installation. Fits both standard and Ranch rifles. Completely CNC machined from super strong 2024 aluminum billet, and hard anodized . - UltiMAK - Make Every Shot Count

Mini-14 Accessories

Clamps directly to barrel for maximum stability and accuracy. The UltiMAK Mini-14 Forward Mount (M4-B) is shown here with stock removed to show attachment method. Four new gas block screws (supplied) securely attach front of mount to barrel. Two additional screws and a 4140 steel clamp provide stability toward the rear of the optic mount. The mount body is one piece, CNC machined from 7075-T6 aluminum and hard anodized.

 

Item Number Price  
M5-B $139.00

 

UTG Mini-14 / 30 Weaver Style Mount with 1 Inch Rings

Constructed of aircraft aluminum and built to last. Complete with well made 1" Weaver style rings. Allows use of the gun sight. Requires no gunsmithing. Does not mar the gun's surface and detaches quickly. Allows adjustments for elevation.

• Fits Mini-14 and Mini-30

• Precision Machined from Aircraft Grade Aluminum Alloy with Maximum Strength
• Provide Insert Block to Replace the Bolt Locking Cover Plate As the Mounting Base
• Smart Design with Elevation Adjustment Tension Screws and Thumb Knob for Rock Solid Locking
• 5" Long Top Rail with 12 Slots for Versatile Accessory Applications
• Optimum Profile with See-thru Feature for Use of Iron Sights
• Fits Both the Conventional Model and Ranch Model
• Simple and Friendly Installation, No Gunsmith or Tool Required
• Complete with 1 Weaver Rings

Material: Aluminum
Weight: 3.9 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 5 inch
Width: 1.7 inch
Height: 2.1 inch

Item Number Price  
MNT-214 $30.00

 

UTG Double Rail System for
Mini-14 Rifles
  

• Precision Machined from Aircraft Grade Aluminum Alloy with Maximum Strength
• Provide Insert Block to Replace the Bolt Locking Cover Plate As the Mounting Base
• Smart Design with Elevation Adjustment Tension Screws and Thumb Knob for Rock Solid Locking
• Double Mil-spec Picatinny Rails for Versatile Accessory Applications
• Optimum Profile with See-thru Feature for Use of Iron Sights
• Fits Both the Conventional Model and Ranch Model
• Simple and Friendly Installation, No Gunsmith or Tool Required
• Complete with 1" Weaver Rings

 

Material: Aluminum
Weight: 7.3 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 2
Length: 8.6 inch
Width: 1.7 inch
Height: 2.1 inch

 

Item Number     Price    
MNT-214D $37.00

 

GG&G Ruger Mini-14 & Mini-30 Ranch Rifle Scope Mount

Fits the Mini-14 Ranch Rifle and Mini-30 Ranch Rifle

Mini-14 scope mount is a MIL-STD-1913 dovetail rail version that also offers a low profile mounting platform for conventional red dot optics or powered scope and ring combinations. The rail is 5.7 inches long to provide ample mounting space. Both rails interface with factory Ranch Rifle integral mounts. Both rails also have relief cuts beneath the rail for unimpeded cartridge ejection. The mounts are precision machined from rugged 6061-T6 aluminum and Type III hard anodized matte black per mil-spec. All  Mini-14 accessories have been designed and manufactured to meet the rigors associated with professional use. Made In The USA.

 

 

Item Number Price  
GGG1382 $47.00

 

NcStar Mini-14 / 30 Rail Mount - Blue

bullet
Mini 14/mini /30 weaver style rail fits only existing Ruger integrated mounts
bullet
Includes mounting hardware
bullet
Weight: 3.03 oz.  Length:7.00"

 

 

 

 

 

Item Number Price  
MRUB $15.00

 

NcStar Mini-14 Rail Mount - Stainless

bullet
Mini 14/Mini /30 weaver style rail fits only existing Ruger integrated mounts
bullet
Includes mounting hardware
bullet
Weight: 3.03 oz.  Length:7.00"

 

 

 

Item Number Price  
MRUS $17.00

 

UTG Mini 14 / Mini-30 Tactical Metal Quad-rail Handguard

•Fits older style straight barrels only. Will NOT fit the newer flanged or tapered barrel

 UTG 2-Piece Design Quick Fit Metal Quad-rail Handguard System for Mini-14 Rifles
• 20 Top Slots, 11 Left and Right Side Slots and 10 Bottom Slots
• Features Innovative Double Locking System with Zero-gap Tight Tolerance for Most Secure Fit
• Clever Design with Extremely Light Weight
• Great Zero Retention Capability for All Accessories Installed on the Rails
• Friendly Installation, No Gunsmithing Required

 

 

 

MNT-HG214QR

 

MNT-HG214QR shown right on gun with additional accessories not included (Gun, Scope, Bipod, Flashlight, Grip, Scope mount with Rings, ect.).

 
Item Number Price  
   MNT-HG214QR SALE $40.00 

  WAS $60.00

 

S&K Ruger Mini-14 Scope Mount

Fits Mini-14 180 Series and 181 Series and UP

Will NOT fit the Mini-30

Replaces rear sight

No Other Work Required

Does NOT Include Scope

#2265 Includes 1" S&K Style Rings

#2270 Fits Weaver Rings NOT INCLUDED

Made In The USA!!!

 

 

 

 

 

#2265

#2270

Item Number Description Price  
2265 S&K Ruger Mini-14 Scope Mount  w/S&K Style 1 Inch Rings - 181 Series And Up $88.00
2270 S&K Ruger Mini-14 Scope Mount -Accepts Weaver Rings- Rings NOT Included - 181 Series And Up $70.00
2270-180 S&K Ruger Mini-14 Scope Mount -Accepts Weaver Rings- Rings NOT Included- 180 Series $70.00

 

S&K Ruger Mini-14 Ranch Scope Mount

Fits Mini-14 Ranch Rifle

Will NOT fit the Mini-30

No Other Work Required

Does NOT Include Scope Or Rings

Made In The USA!!!

 

Item Number Description Price  
RU70 S&K Ruger Mini-14 Ranch Scope Mount  - Accepts Weaver Rings- Rings NOT Included $71.00

 

Mounts For Other Weapons

Mini-Scout-MountTM for M1-Garand

Would you like to shoot your GARAND more, but have trouble seeing the sights?  Now this ever-popular war horse can now be outfitted with the latest sighting technology, thanks to the unique design of the Mini-Scout-MountGarand.  It installs in minutes so you can easily and securely mount red dot sights or a pistol scope for faster target acquisition and better peripheral vision while shooting. You can also install the optional Tactical Light Mount Kit ™ for quick and reliable attachment of most tactical flashlights, lasers and other accessories.  Get the most out of your GARAND and enjoy shooting it more!


The Mini-Scout-MountGarand is specifically designed and guaranteed to fit US Military Standard M1-Garand rifles.  Our mounts will fit and function properly on many of the “TANKER” versions, but often require some fitting.  It will also fit many of the BM-59 and BM-63 rifles.  See Notes Below. Will NOT fit theM1D model Garand (Sniper)

Iron Sights can still be used with this mount.

The Garand mount weighs 12.3 ounces and is 9.415 inches long.

IMPORTANT!
The Mini-Scout-MountGarand is specifically designed for a drop-in fit on US Military Specification, Standard Weight barrels.  It will NOT fit a heavy barrel (usually a match after-market barrel). 

Tanker

Our mounts will fit and function properly on many of the “TANKER” versions, but often require some fitting.  Note that every “TANKER” is essentially a custom built rifle. On some the operating rod will drag on our barrel clamp, binding it and interfering with the function of the rifle.  This can usually be remedied by filing off a little of the barrel clamp material just where the operating rod drags.  On a very few “TANKERS”, the drag of the operating rod against the clamp is so severe that it cannot be modified enough to make it work.  REMEMBER, before you start filing that if you modify the clamp or any part of the mount, you will void the warranty and it is also non returnable.

BM-59 and BM-63

BM-59 and BM-63 rifles are Italian copies of the GARAND and most will accept our mount.  However, on some units the mount body is too long to fit between the handguard retainer ring and the receiver.  This can usually be fixed by grinding or filing off a small amount of material from the back of the mount body.  REMEMBER, before you start filing that if you modify the clamp or any part of the mount, you will void the warranty it is also non returnable.

Tactical Light Kit, Scope, Laser, And Flashlight Not Included

Scope Not Included

Scope And Rings Not Included

 

Scope And Rings Not Included

 

This Tactical Light Kits (Sold Separately)  Allows You to Mount a Laser, Flashlight, or other accessory.

Scope, Laser, And Flashlight Not Included

Item Number Description Price  
AMEGAScout3 Amega Mini-Scout Mount for M1 Garand $165.00

Standard Weaver and Short Picatinny Light Kits shown. Screws included. #AMEGATLK

Long Picatinny #AMEGALPLK

 

Mount Shown With Light Holder and Flashlight (not included)

Amega Ranges Tactical Light Kit

Sold Separately Below- Mount Will Accept 2 Rails

For the Ruger Mini-14, M1-Garand, and M1/M1A

Provides an easy way to add additional Picatinny/Weaver equipment mounting rails to the Amega Mini-Scout mount.

This accessory fits all models of the Mini-Scout-Mount™ allowing the shooter to quickly attach most makes of tactical flashlights, laser sights, IR illuminators, and other accessories.  It is easily installed on either side for right or left-handed shooters (or both sides for two accessories)  and in different positions for use of larger accessories. It is secured to the mount body with two screws and the wrench provided. 

Choose between the Mil-Std 1913 Picatinny (standard or long length) or the Glock® style which accepts Weaver style rings.  

The Mil-Std 1913 Picatinny standard length measures 2.0 inches; the Mil-Std 1913 Picatinny long length measures 3.95 inches

Made In The USA

Order Number Description Price  

AMEGATLK

Amega Standard Weaver Tactical Light Mounting Kit fits Mini-14, M1 Garand, and M14/M1A Amega Scout Mounts. One Rail Only

SALE!!! $18.00 WAS  $19.00

AMEGAPLK Amega Short Picatinny Rail Tactical Light Mounting Kit fits Mini-14, M1 Garand, and M14/M1A Amega Scout Mounts. One Rail Only $20.00
AMEGALPLK Amega Long Picatinny Rail Tactical Light Mounting Kit fits Mini-14, M1 Garand, and M14/M1A Amega Scout Mounts. One Rail Only $30.00

 

Amega Ranges Tactical Sling Mount Adaptor

This rugged accessory provides a low-profile sling mounting point for 1.25" web slings and has a .25" hole for H&K type quick detachable sling snaps. It can be mounted under the Tactical Light Mount Kit or alone on the left or right side of any model of Mini-Scout-Mount™.

Made of durable blued steel, it installs quickly and easily with the screws and tool provided. This is a quick and easy way to set up your sling for traditional over the shoulder carry, or in a tactical cross chest-muzzle down position. Weight 1.0 oz.

For Use on the Amega Ranges Scout Mounts - Sling NOT included

Made In The USA

 

Item Number   Price  
TSMA Amega Ranges Tactical Sling Mount Adaptor $20.00

 

Amega Ranges Detachable Sling Mounting Kit

This exceptionally handy accessory provides a convenient sling mounting point for all standard quick detachable sling swivels. It will fit on any model of Mini-Scout-Mount™ on either the left or right side, and is easily attached with the tool provided. This is a quick and easy way to set up your sling for traditional over the shoulder carry, or in a tactical cross chest-muzzle down position.

Made with an anodized aluminum body, blued steel swivel stud and screws, and tested to support over 200 lbs. Weight 0.75 oz.

For Use on the Amega Ranges Scout Mounts - Sling NOT included

Made In The USA

Item Number Price  
DSMK $25.00

 

Mini-Scout-Mount™ for US M14-M1A Rifle

This rifle was the inspiration for the Ruger® Mini-14 & 30™. It can now be quickly and easily upgraded with the latest sight system technology (Aimpoint®, Holosights, red-dots, etc.) or fitted with pistol or scout type scopes. Just remove the trigger assembly, stock, and hand guard, then follow the simple instructions. It also accepts the Tactical Light Mount Kit for quick and reliable attachment of most tactical flashlights (Streamlight M3 and M6, etc.) and other lighting/sighting accessories.

This model fits ONLY US Mil-spec barrels, including the 16-inch SOCOM type (without scout mount). NO heavy barrels, “Loaded” M1A’s with their medium-heavy barrels, or Chinese manufactured barrels will fit.

This mount will not preclude the use of iron sights, or interfere with receiver-mounted scope bases. 

Made In The USA

Item Number Description Price  
AMEGAScout4

Amega Mini-Scout Mount for M14/M1A

$299.00
AMEGAScout5 Amega Mini-Scout Mount for M1-A SOCOM/SCOUT/BUSH   Fits the heavier Springfield Armory barrels $299.00

Standard Weaver and Short Picatinny Light Kits shown. Screws included. #AMEGATLK

Long Picatinny #AMEGALPLK

 

Mount Shown With Light Holder and Flashlight (not included)

Amega Ranges Tactical Light Kit

Sold Separately Below- Mount Will Accept 2 Rails

For the Ruger Mini-14, M1-Garand, and M1/M1A

Provides an easy way to add additional Picatinny/Weaver equipment mounting rails to the Amega Mini-Scout mount.

This accessory fits all models of the Mini-Scout-Mount™ allowing the shooter to quickly attach most makes of tactical flashlights, laser sights, IR illuminators, and other accessories.  It is easily installed on either side for right or left-handed shooters (or both sides for two accessories)  and in different positions for use of larger accessories. It is secured to the mount body with two screws and the wrench provided. 

Choose between the Mil-Std 1913 Picatinny (standard or long length) or the Glock® style which accepts Weaver style rings.  

The Mil-Std 1913 Picatinny standard length measures 2.0 inches; the Mil-Std 1913 Picatinny long length measures 3.95 inches

Made In The USA

Order Number Description Price  

AMEGATLK

Amega Standard Weaver Tactical Light Mounting Kit fits Mini-14, M1 Garand, and M14/M1A Amega Scout Mounts. One Rail Only

SALE!!! $18.00 WAS  $19.00

AMEGAPLK Amega Short Picatinny Rail Tactical Light Mounting Kit fits Mini-14, M1 Garand, and M14/M1A Amega Scout Mounts. One Rail Only $20.00
AMEGALPLK Amega Long Picatinny Rail Tactical Light Mounting Kit fits Mini-14, M1 Garand, and M14/M1A Amega Scout Mounts. One Rail Only $30.00

Ruger 10-22 Carbine Mini-Scout-Mount

This rugged aluminum unit bolts on with NO modifications and features a full-length Mil-Std 1913 Picatinny rail on top. Now you can mount a modern tactical sight system (red-dot/holo sight, LER scope, etc.) to get the fastest target acquisition possible with this proven rifle.

The scout mount will not preclude the use of iron sights, or interfere with receiver-mounted scope bases.  Fits Carbine Stock Only. (barrel banded)

The Ruger 10/22 mount weighs 8.1 ounces and is 9.965 inches long.  

Made In The USA

All Scout Mounts come with all the hardware and tools you need.

 

Item Number

Description Price  
AMEAGASCOUT9 AmegaScout 10/22 Scout Mount $129.00

Standard Weaver and Short Picatinny Light Kits shown. Screws included. #AMEGATLK

Long Picatinny #AMEGALPLK

 

Mount Shown With Light Holder and Flashlight (not included)

Amega Ranges Tactical Light Kit

Sold Separately Below- Mount Will Accept 2 Rails

For the Ruger Mini-14, M1-Garand, and M1/M1A

Provides an easy way to add additional Picatinny/Weaver equipment mounting rails to the Amega Mini-Scout mount.

This accessory fits all models of the Mini-Scout-Mount™ allowing the shooter to quickly attach most makes of tactical flashlights, laser sights, IR illuminators, and other accessories.  It is easily installed on either side for right or left-handed shooters (or both sides for two accessories)  and in different positions for use of larger accessories. It is secured to the mount body with two screws and the wrench provided. 

Choose between the Mil-Std 1913 Picatinny (standard or long length) or the Glock® style which accepts Weaver style rings.  

The Mil-Std 1913 Picatinny standard length measures 2.0 inches; the Mil-Std 1913 Picatinny long length measures 3.95 inches

Made In The USA

Order Number Description Price  

AMEGATLK

Amega Standard Weaver Tactical Light Mounting Kit fits Mini-14, M1 Garand, and M14/M1A Amega Scout Mounts. One Rail Only

SALE!!! $18.00 WAS  $19.00

AMEGAPLK Amega Short Picatinny Rail Tactical Light Mounting Kit fits Mini-14, M1 Garand, and M14/M1A Amega Scout Mounts. One Rail Only $20.00
AMEGALPLK Amega Long Picatinny Rail Tactical Light Mounting Kit fits Mini-14, M1 Garand, and M14/M1A Amega Scout Mounts. One Rail Only $30.00

 

Amega Ranges Tactical Sling Mount Adaptor

This rugged accessory provides a low-profile sling mounting point for 1.25" web slings and has a .25" hole for H&K type quick detachable sling snaps. It can be mounted under the Tactical Light Mount Kit or alone on the left or right side of any model of Mini-Scout-Mount™.

Made of durable blued steel, it installs quickly and easily with the screws and tool provided. This is a quick and easy way to set up your sling for traditional over the shoulder carry, or in a tactical cross chest-muzzle down position. Weight 1.0 oz.

For Use on the Amega Ranges Scout Mounts - Sling NOT included

Made In The USA

 

Item Number   Price  
TSMA Amega Ranges Tactical Sling Mount Adaptor $20.00

 

Amega Ranges Detachable Sling Mounting Kit

This exceptionally handy accessory provides a convenient sling mounting point for all standard quick detachable sling swivels. It will fit on any model of Mini-Scout-Mount™ on either the left or right side, and is easily attached with the tool provided. This is a quick and easy way to set up your sling for traditional over the shoulder carry, or in a tactical cross chest-muzzle down position.

Made with an anodized aluminum body, blued steel swivel stud and screws, and tested to support over 200 lbs. Weight 0.75 oz.

For Use on the Amega Ranges Scout Mounts - Sling NOT included        

Made In The USA                        

Item Number Price  
DSMK $25.00

 

M1 Carbine Scout Mount

This new model Mini - Scout - MountTM fits all US military spec M1-Carbines (including those made by Kahr Arms), and has the same great features as the proven Mini-Scout-MountTM for the M1-Garand. It will NOT fit the Universal or Iver Johnson Carbines.

bulletBolts on with NO permanent modifications required
bulletFull-length sight base accepts all modern sight systems (ACOG, Red Dot, Holosights, etc.), Pistol or Scout scopes
bulletMade of precision extruded and machined aluminum alloy
bulletFlat non-reflective, hard anodized finish
bulletDoes not interfere with OEM sight use
bulletAccepts Tactical Light Mount Kits for adding flashlights, etc.
bulletRemains solidly in place and dissipates heat

Get the most out of your trusty M1-Carbine today by upgrading it into a firearm platform than can utilize all of the modern accessories to meet you plinking and home defense needs !

Made In The USA

 

Item Number Description Price  
AmegaScout10 Amega Ranges M1 Carbine Scout Mount  $150.00

 

Amega Ranges Mini-Scout-Mount™ 870 

 Mini-Scout-Mount ™ for Remington ® 870 12ga (both plain & vent rib barrels) 

Now you can upgrade your trusty 12 Gauge Remington ® 870 to accept a modern sight system and tactical flashlights. With a red-dot sight or pistol/scout scope, you can get the most out of your favorite tight choked turkey gun or slug barrel. This rugged aluminum mount bolts onto the 870 barrel in minutes with NO modifications to the gun!

Works with all fore end styles and allows you to change barrels on your shotgun without losing the zero on your sighting system. Good for left-hand and right-hand shooters. 

The Plain Barrel version will fit any 12 gauge Remington ® manufactured smooth barrel, including slug barrels equipped with Remington ® rifle sights. Just remove the rear sight slide and the Mini-Scout-Mount ™ 870 will drop right over the rear sight ramp.

The Vent Rib model will fit all of the Remington ® manufactured vent ribbed 12 gauge barrels. Our 870 mount WILL fit the 870-Super Express Magnum (3 1/2" shell) just like all of the other 870 12ga barrels.

Made In The USA

 
Item Number Description Price  
  AmegaScout11 Amega Ranges Mini-Scout-Mount™ 870 Plain Barrel and Ribbed Barrel $160.00

 

Amega Ranges Remington Mini-Scout-Mount ™ VII

 

Will fit any caliber Remington® 742 / 760 / 7400 / 7600 / 750

Details and Specifications

Mini-Scout-Mount-VII ™ for Remington ® 742/760/7400/7600/750
Now Dad (or Grandpa) can take their favorite deer rifle back into the woods in a modern "Scout Rifle" configuration, equipped with a modern sight system to help them get on targets faster and with better peripheral vision. Transform that trusty deer rifle in minutes with NO modifications to the gun! The bolt-on construction of the Mini-Scout-Mount-VII™ requires NO alteration of your rifle and will improve its accuracy with most types of ammunition. Now you can have a rugged platform to mount a modern red-dot sight, pistol or scout scope, along with tactical flashlights, lasers, etc. (requires a Tactical Light Mount Kit).

The Mini-Scout-Mount-VII™ will fit any barrel that has a REAR SIGHT RAMP held on with TWO 6x48 SCREWS. It will not work on dovetailed or untapped barrels. Just remove fore end and the rear sight ramp from the barrel, install with the installation tool provided and replace the fore end.

This is a mount only - Scopes, lasers, flashlights, and accessory rails NOT included.

Made In The USA

 

bulletWeight: 8.0 oz.
bulletLength: 11.0 inches

 

 

 

 

This is a mount only - Scopes, lasers, flashlights, and accessory rails NOT included.

Item Number Price  
AMEGASCOUT13 $150.00
 
Amega Scout Remington 700 Scout Mount

Mini-Scout-Mount ™ for Remington ® 700
The popularity of scout rifles is growing, and supported by the fact that Ruger®, Savage®, and Steyr® currently make bolt action scout rifles. Now you can add a scout mount to the best-selling bolt action rifle in US history, the Remington® Model 700. Now you can set up your favorite bolt-action rifle as a fast-handling scout rifle, capable of mounting a wide variety of modern sight systems and tactical accessories.

This innovative scout mount will fit any Remington® Model 700 that has a standard weight barrel with a rear sight ramp held on with two 6-48 screws. This is the most common barrel profile found on the Model 700, and may be found in any caliber from .17 up to .30. The length of action does not matter. The installation is simple and usually accomplished in under 10-minutes with few tools. This mount weighs only 6.6 ozs, and is finished in a low-reflective, flat black anodizing.

The rugged mount centers directly over the bore and is machined from extruded 6061T6 aluminum, and then anodized with a flat black finish. The full-length Picatinny rail will accommodate long eye relief scopes or projected dot sights.

Like all Mini-Scout-Mounts™, this model accepts Tactical Light Mount Kits for quick and secure mounting of tactical flashlights, laser sights and other accessories. It will also accept the new Detachable Sling Mount Kit, or Tactical Sling Mount Adapter for a quick and solid sling attachment point.

Made In The USA

 

bulletWeight: 6.6oz.
bulletFinish: Low-reflective, flat black anodized
bullet 

 

Scope and Rings NOT Included

Item Number Price  
AMEGASCOUT15 $160.00
 

 

 

 

Your privacy is important to us. Our Checkout page Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

 

 

Can't find what you are looking for???  Contact Us  with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes. 

  2014, The Country Shed

RESTRICTED ITEMS   Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed  does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws.  You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area.  Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle,  Handgun, Pistol, Assualt  Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers,  UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate,  MAKO,  Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!