Sako Tikka Scope Mounts

The Country Shed

Mounts and Scopes	Tactical Shotgun	Meat Processing	Heated Gloves & Socks	SAKO Tikka Beretta
Holsters	Rifle Bases	Fishing Equipment	Handgun / Pistol	DVD's and CD's
Rifle Stocks	Vehicle Tents	Tools	Books	Sling Shots
Flashlights & Lasers	Shotgun Stocks	Binoculars	Special Closeouts	General Accessories

eretta,tr16629618a,sako,tikka,scope,mount,shotgun,barrel,choke,skeet,px4,u22,cx4.mobilchoke.optima-choke,urika,teknys,xtrema,es100,a300,a390,al391,trg-s,trg,t3,trg 42,

Sako/Tikka Scope Mounts

1-800-Beretta for Beretta (Sako/Tikka) Customer Support and all technical questions.

The Tikka Optilock mount keep the scope centered in all conditions. The scope rests in the grip of a revolutionary ball-bearing type ring. Unlike conventional mounts, the Optilock's polymer rings distribute the clasping force evenly along the scope shaft, ensuring that your valuable optics will not be twisted or scratched. With Optilock mounts, the scope and mounts are easily mounted and removed as one unit without affecting the point of impact. The limiter pin in the mount base and the limiter pin slot on the receiver enable fast and accurate remounting of the scope/mount unit and guarantee stability of mounting. Optilock bases and rings are machined from a solid block of CR-Mo Alloy or stainless steel. The base design with its clamping device connects to the Tikka T3 rifle's integral dovetail rail on the receiver.

The Optilock Rings listed below require an Optilock Base for mounting. The Sako and Tikka bases below are designed to be used on Sako and Tikka rifles with mount rails (dovetails) on the receiver. Please order bases with your rings if you want to mount the unit on a rifle. Sako/Tikka rings require Sako/Tikka bases. Tikka rifles require Tikka bases and Sako rifles require Sako bases. Tikka Optilock Rings fit Sako and Tikka Bases listed below. Mounting screws and wrench included with rings and bases.

Optilock Ringmounts are one piece units that combine the rings and the base so no additional hardware is required to mount the scope.

Optilock Rings require the purchase of Optilock Bases. You must select the diameter (one inch or 30mm) and the ring height for the scope you are installing. Use the Height Selector For Optilock Mount Systems chart at the bottom of the page.

Optilock Bases are required for Optilock Rings. Sako rifles require you to use the Short, Long, and Extended Sako Optilock Base Selection Chart on the this page to select the Short, Long, or Extended base to fit the action length of the rifle. All Tikka rifles accept the same Tikka Universal base. All Optilock bases are available in blue and stainless finish.

Quickmounts utilize a lever to mount the unit and most include the rings

The innovative new design has all the advantages of Sako Optilock scope mounts joined to new practical quick-acting levers. Levers are adjustable, making the removal and remounting of the scope precise and easy. Levers can be adjusted to the desired position.

In big game hunting, the situations may require that you can remove the scope in seconds and use open sights or change to another scope type. Sako Optilock Quickmount allows you to do that, and leaves no disturbing base pieces on the action. The quickmount feature is also practical for traveling storing and when the rifle is cleaned and oiled. When re-mounting just push the unit back to dovetail rails of your Sako so that the limiter pin is pushed all the way to the slot on the receiver, tighten the levers and you are all set - in seconds! The scope is now zeroed as it was before the removal.

Read This Before Ordering

Please note that most Sako and Tikka rifles require only low Optilock mounts for up to a 2.48"(63mm front belle diameter) one inch tube scope, and up to a 2.64"(67mm front belle diameter) 30mm scope tube. Most first time mount buyers purchase mounts that are too high. Please see the chart below for Sako/Tikka recommendations for mount height vs. scope belle diameter. The smaller number (belle size) is for heavy barrels and the larger number (belle size) is for standard barrels. Also see chart on this page for Ring Height Selection for Tikka Ringmounts. Please don't forget to measure your scope cover outside diameter when measuring diameters to select ring height.

Order Number

SKU

Description

Price

S1322967

76099-5

Tikka Ring Mounts Standard Ringmounts 1 Inch(40 mm Object max) Blue

$40.00

S132R967

76025-4

Tikka Ring Mounts Standard Ringmounts 1 Inch(40 mm Object max) Silver Gray

$40.00

2872-07

80474-3

Tikka Ring Mounts 1 Inch / Low / M595-695 & T3 Satin Nickel

$59.00

Height Selector for Tikka Ringmounts
	Ring Diameter	Height	Max Dia, Std. Barrel	Max Dia, Heavy Barrel
LOW	1"	0.97"	55mm	53mm
MEDIUM		1.09"	65mm	60mm
HIGH		1.20"	75mm	66mm
LOW	30mm	0.99"	59mm	55mm
MEDIUM		1.10"	67mm	61mm
HIGH		1.21"	75mm	66mm

S1700956

80737-9

Sako Optilock Base Short Blue -See short, long and extended Optilock base selection chart below

$70.00

S1700957

80738-6

Sako Optilock Base Long Blue -See short, long and extended Optilock base selection chart below

$70.00

S1700958

80739-3

Sako Optilock Base Extended Blue -See short, long and extended Optilock base selection chart below

$70.00

S170R956

80734-8

Sako Optilock Base Short Stainless--See short, long and extended Optilock base selection chart below

$85.00

S170R957

80735-5

Sako Optilock Base Long Stainless -See short, long and extended Optilock base selection chart below

$85.00

S170R958

80736-2

Sako Optilock Base Extended Stainless-See short, long and extended Optilock base selection chart below

$85.00

Tikka Optilock Bases
S132R916	80740-9	Tikka Optilock Base Universal Stainless fits all Tikka Rifles. See chart below Finally Back In Stock.	$85.00
S1320916	80741-6	Tikka Optilock Base Universal Blue fits all Tikka Rifles. See chart below	$70.00

Short, Long, and Extended Sako Optilock Base Selection Chart

Optilock Rings fit Optilock Bases

S1300924

80746-1

Sako/Tikka Optilock Rings 1 Inch / Low Blue

$76.00

S1300925

80748-5

Sako/Tikka Optilock Rings 1 Inch/ High Blue

$76.00

S1300929

80749-2

Sako/Tikka Optilock Rings 30mm / Low / Blue

$76.00

S1300930

80751-5

Sako/Tikka Optilock Rings 30mm / High / Blue

$76.00

S1300961

80747-8

Sako/Tikka Optilock Rings 1 Inch / Medium /Blue

$76.00

S1300964

80750-8

Sako/Tikka Optilock Rings 30mm / Medium /Blue

$76.00

S130R924	80742-3	Sako/Tikka Optilock Rings 1 Inch/ Low / Stainless	$93.00
S130R929	80744-7	Sako/Tikka Optilock Rings 30mm / Low / Stainless	$93.00
S130R961	80743-0	Sako/Tikka Optilock Rings 1 Inch / Medium / Stainless	$93.00
S130R964	80745-4	Sako/Tikka Optilock Rings 30mm / Medium / Stainless	$93.00
Sako A7 Rings to fit bases supplied with rifle.
S180F918	75780-3	Sako/Tikka Optilock Rings - Phosphate Finish - 30 mm Diameter - LOW (32.4 mm / 1.28 Inch) Fits the NEW Sako A7 for up to a 40mm scope	$147.00
S180F919	75779-7	Sako/Tikka Optilock Rings - Phosphate Finish - 1 Inch Diameter - LOW (30.5 mm / 1.20Inch) Fits the NEW Sako A7 for up to a 40mm scope	$147.00

S1802916	77827-3	Sako Ringmounts 1 Inch / Low / fit WEAVER RAIL Blue Fits the new Sako A7 For up to a 40mm scope	$85.00
S1802912	80466-8	Sako Finnfire Ringmounts 1 Inch / Low / Fits P94s Blue	$85.00
S1701900	80764-5	Sako Optilock Ringmounts 1 Inch / X-Low / All 75 Actions Blue	$144.00
S1701904	80765-2	Sako Optilock Ringmounts30mm / X-Low / All 75 Actions Blue	$144.00

S1900902	80766-9	Sako Optilock Quickmounts 1 Inch/ Low / All 75 Actions Blue including TRG-S, w/rings	$375.00	Discontined
S1900912	80768-3	Sako Optilock Quickmounts 30mm / Low / All 75 Actions Blue	$375.00	Discontinued
S1900913	80767-6	Sako Optilock Quickmounts 1 Inch / Medium / All 75 Actions Blue	$375.00
S1900916	80769-0	Sako Optilock Quickmounts 30mm / Medium / All 75 Actions Blue	$375.00	Discontinued

Read This Before Ordering

Short, Long, and Extended Sako Optilock Base Selection Chart

Height Selector for Tikka Ringmounts
	Ring Diameter	Height	Max Dia, Std. Barrel	Max Dia, Heavy Barrel
LOW	1"	0.97"	55mm	53mm
MEDIUM		1.09"	65mm	60mm
HIGH		1.20"	75mm	66mm
LOW	30mm	0.99"	59mm	55mm
MEDIUM		1.10"	67mm	61mm
HIGH		1.21"	75mm	66mm

Max Dia = Maximum scope objective diameter (or outside diameter of scope cover) measured forward of the receiver at Max barrel diameter.

Height Selector for Optilock Mount Systems
	Ring Diameter	Height	Max Dia, Heavy Barrel	Max Dia, Std Barrel
X-LOW***	1"	1.06"	48mm	56MM
LOW		1.20"	55mm	63mm
MEDIUM		1.40"	65mm	73mm
HIGH		1.59"	75mm	83mm
X-LOW*	30mm	1.14"	52mm	60mm
LOW		1.28"	59mm	67mm
MEDIUM		1.44"	67mm	75mm
HIGH		1.59"	75mm	83mm

Max Dia = Maximum scope objective diameter (or outside diameter of scope cover) measured forward of the receiver at Max barrel diameter.

***X-Low available as Ringmounts Only

The chart is correct for all tube lengths, however keep in mind that these are maximum outside objective bell diameters that are listed on the chart, not the scope manufacturer's listed objective lens size.

For example, a typical 50 mm scope will have an actual outside diameter of 58 mm. You can see from the chart, in the first column, that the maximum objective diameter with low rings combined with a standard contour barrel is 55 mm. That means the objective bell diameter of a typical 50 mm scope is 3 mm to large and will hit the barrel when the scope is mounted. The second column listing is to be used on rifles that have a bull or heavy type barrel, you can see that these listed maximum objective bell diameters are less than in the first column, indicating the smaller available bell clearance when mounting scopes on rifles with thicker barrels. Most scope manufacturer's will list the outside objective bell diameter on their websites or catalogs scope specification charts, this way you can determine which ring height to choose without having to have the scope in hand.

A good rule to keep in mind is:
Use low rings for scopes with up to 40 mm lens size
Use medium rings for scopes with 50 mm lens size
Use high rings on scopes with larger than 50 mm lens size

Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

We ship to APO addresses!!!! We ship to APO addresses!!!!

Can't find what you are looking for??? Contact Us with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes.

2011, The Country Shed

RESTRICTED ITEMS Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws. You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area. Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle, Handgun, Pistol, Assualt Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers, UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate, MAKO, Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!