The Country Shed 

Scopes, Mounts,& Accessories Tactical Shotgun General Accessories Heated Gloves & Socks SAKO Tikka Beretta
Holsters Rifle Bases

Gun Accessories

Handgun / Pistol

DVD's and CD's

Rifle Stocks High Capacity Magazines Tools Disassembly Manuals Sling Shots
Flashlights & Lasers Shotgun Stocks Survival Gear

NFL & College Flags

Slings & Swivel Sets
Novelty And Gift Items Ammo Can Magnets & Stickers Dutch Ovens & Accessories Special Closeouts

Home Contact Us Ordering Shipping & Policies Links What's New & Hot Gift Ideas Join Email List Special Closeouts

 

Scope Rings

 

1 Inch Rings

 

We offer scope rings from Leapers with high quality features including low, medium, and high rings.  Also, see-thru design on some allows you to use your existing sights. 

Leapers 1 Inch Weaver Rings Low

1" Diameter, 18mm width, fits up to 40mm objective scopes, fits standard Weaver mounts, non see-thru, low height. Comes in a set of two.

 

 

 

Item Number Price  
RG18W-25L $9.00

 

UTG 1 Inch Picatinny/Weaver Medium Profile

 

Fits Scope Outer Objective Up To 53mm

Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
• Friendly Hex Screws with Retention Features and Full Length Locking Plate to Guarantee Easy Installationand Secure Fit
• Fits All Picatinny/Weaver Rails

 

Material: Aluminum
Pieces: 2
Rail Type: Picatinny/Weaver
Profile Level: Medium
Ring Diameter: 1 Inch
Ring Width: 21 mm

 

 

A: 1 Inch
B: 21mm
C: 14mm
D: N/A
Item Number Price  
RGWM-25M4 SALE $9.00

WAS $15.00 

 

EGW 1 Inch Practical Aluminum Rings .750 Inch

 

EGW Practical Aluminum Rings are machined from aluminum and anodized for a matte black finish.

 

 

Made In The USA

 

 

 

 

 

 

 

Item Number Price  
60000 $60.00

 

Weaver Style 1 Inch See Thru  High Profile Rings

1" Diameter

Fits Scopes up to 56mm Obj., 

4 Top Screws

Fits Standard Weaver Mounts

Comes in a set of 2

 

Item Number Price  
RGWM-25H4 $15.00

 

Item Number Description Price  
RG2W1104 UTG 1 Inch QD Twist Lock Picatinny/Weaver Rings - Low 4 Screw $19.00
RG2W1154 UTG 1 Inch QD Twist Lock Picatinny/Weaver Rings - Medium 4 Screw $19.00
RG2W1156 UTG 1 Inch QD Twist Lock Picatinny/Weaver Rings - Medium 6 Screw $19.00
RG2W1204 UTG 1 Inch QD Twist Lock Picatinny/Weaver Rings - High 4 Screw $19.00
RG2W1206 UTG 1 Inch QD Twist Lock Picatinny/Weaver Rings - High 6 Screw $19.00 Out Of Stock

 

Item Number Description Price  
RQ2W1104 UTG 1 Inch QD Lever Lock Picatinny/Weaver Rings - Low 4 Screw $22.00
RQ2W1154 UTG 1 Inch QD Lever Lock Picatinny/Weaver Rings - Medium 4 Screw $22.00
RQ2W1156 UTG 1 Inch QD Lever Lock Picatinny/Weaver Rings - Medium 6 Screw $22.00
RQ2W1204 UTG 1 Inch QD Lever Lock Picatinny/Weaver Rings - High 4 Screw $22.00
RQ2W1206 UTG 1 Inch QD Lever Lock Picatinny/Weaver Rings - High 6 Screw $22.00

 

UTG Picatinny/Weaver Bi-directional Offset 1 Inch Ring Mount

• Precision Machined from Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish


• Friendly Hex Screws with Retention Features and Full Length Locking Plate to Guarantee Easy Installationand Secure Fit


• Fits All Picatinny/Weaver Rails


• 38mm Bi-directional Offset Provides Extended and Comfortable Eye Relief


• Ring Distance from Outer Edge to Outer Edge 75mm

 

 

 

 

 

 

Item Number Price  
RGWMOFS38-25H4 $14.00

 

UTG Integral QD 1 Inch Ring Mount, 2 Picatinny Slots, 35mm Mount Clearance, 70mm Base

• Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable to Fit on Any Picatinny Rail
• Clever Posi-lock Crossbar Design and Spring Tension Controlled Locking Plate with Steel Insert Guarantees Most Secured Installation
• Tight Tolerance Control and Repeatable Positive Locking for Optimal Re-zero
• High Quality Synthetic Tape Applied on Rings Internal Surface for Scope and Mount Protection
• Adjustable Quick Detach Lever Lock System
• Ring Top Picatinny Rail

 

 

 

 

Material: Aluminum/Steel
Weight: 5.7 oz
Pieces: 1
Rail Type: Picatinny/Weaver
Profile Level: Medium
Ring Diameter: 1 Inch
Ring Width: 18/18 mm
A: 1 Inch
B: 18/18mm
C: 15mm
D: 95mm
E: 35mm

 

 

Crocodile Mount And Laser NOT Included

Item Number Price  
M1B35070R2 $22.00

 

 

1 Inch & 30MM Rings

 

Item Number Description Price  
RSW1104 UTG 1 Inch 2 Piece Low Profile Steel Picatinny Rings 16mm Wide $49.00
RSW3104 UTG 30mm 2 Piece Low Profile Steel Picatinny Rings 16mm Wide $49.00
RSW1154 UTG 1 Inch 2 Piece Medium Profile Steel Picatinny Rings 16mm Wide $49.00 Out Of Stock
RSW3154 UTG 30mm 2 Piece Medium Profile Steel Picatinny Rings 16mm Wide $49.00
RSW1204 UTG 1 Inch 2 Piece High Profile Steel Picatinny Rings 16mm Wide $49.00
RSW3224 UTG 30mm 2 Piece High Profile Steel Picatinny Rings 16mm Wide $49.00 Out Of Stock

 

Item Number Description Price  
RWU012510 UTG 1 Inch P.O.I. Picatinny/Weaver Rings - Low  $49.00
RWU013010 UTG 30mm P.O.I. Picatinny/Weaver Rings - Low  $49.00
RWU012515 UTG 1 Inch P.O.I. Picatinny/Weaver Rings - Medium  $49.00
RWU013015 UTG 30mm P.O.I. Picatinny/Weaver Rings - Medium $49.00
RWU012520 UTG 1 Inch P.O.I. Picatinny/Weaver Rings - High  $49.00
RWU013022 UTG 30mm P.O.I. Picatinny/Weaver Rings - High  $49.00

 

30MM Rings

 

 

AccuShot Premium 30mm Weaver Style Medium Profile See-Thru Ring

Fits 30mm tube up to 50mm objective

Fits Weaver and picatinny rails

4 Top screws

Comes in a set of 2

Item Number Price  
RGWM-30M4 $15.00

 

 

Weaver Style 30mm High Profile See-Thru Rings

Fits 30mm tube up to 56mm objective

Fits Weaver and picatinny rails

4 Top screws

Comes in a set of 2

 

 

 

Item Number Price  
RGWM-30H4 $15.00

 

EGW 30mm Practical Aluminum Rings .840 Inch

 

EGW Practical Aluminum Rings are machined from aluminum and anodized for a matte black finish.

 

 

Made In The USA

 

 

 

 

 

 

 

Item Number Price  
61000 $60.00

 

Item Number Description Price  
RG2W3104 UTG 30mm QD Twist Lock Picatinny/Weaver Rings -  Low 4 Screw $19.00
RG2W3154 UTG 30mm QD Twist Lock Picatinny/Weaver Rings -  Medium 4 Screw $19.00
RG2W3156 UTG 30mm QD Twist Lock Picatinny/Weaver Rings -  Medium 6 Screw $19.00
RG2W3224 UTG 30mm QD Twist Lock Picatinny/Weaver Rings -  High 4 Screw $19.00
RG2W3226 UTG 30mm QD Twist Lock Picatinny/Weaver Rings -  High 6 Screw $19.00

 

Item Number Description Price  
RQ2W3104 UTG 30mm QD Lever Lock Picatinny/Weaver Rings - Low 4 Screw $22.00
RQ2W3154 UTG 30mm QD Lever Lock Picatinny/Weaver Rings - Medium 4 Screw $22.00
RQ2W3156 UTG 30mm QD Lever Lock Picatinny/Weaver Rings - Medium 6 Screw $22.00
RQ2W3224 UTG 30mm QD Lever Lock Picatinny/Weaver Rings - High 4 Screw $22.00
RQ2W3226 UTG 30mm QD Lever Lock Picatinny/Weaver Rings - High 6 Screw $22.00
RQ2W3256S UTG 30mm QD Lever Lock Picatinny/Weaver Rings - High 6 Screw $22.00

 

EGW HD 30 MM Tactical Aluminum Rings .850 Inch

EGW’s bestselling rings are created in our American-made Fadal by machining aircraft grade aluminum from billet one pair of rings at a time.

We bore the holes to 30mm +.0014”. When we machine the profiles of the ring we build in a .030” radius on all outside edges. Next we machine a 45 degree bevel around the entire ring and clamp. We clamp the pair on a 30mm mandrill with a 1/8” pin to keep the pair exactly together. We then thread form and tap holes in the ring. Thread forming is 40% stronger than cut threads.

The rings are serial engraved before they are separated. One ring and cap has a decimal in front of the numbers so the caps match exactly. i.e. one ring will show “575” and its identical twin will show “.575”.

We then sand blast them for a matte finish and anodize them in Eastern Pennsylvania.

The cross bolt is made from chromoly steel in our turning centers, roll threaded in-house and heat treated and blued locally. The ring nut is beveled on both ends and an inset washer is used to keep the nut from scoring the finish on the clamp. The threads are roll formed for strength, fit (class 2a) and finish. The clamp is machined from billet and complete with radius and bevels, and anodized to the match rings.

Our rings are measured from where the ring sits on the top of the base, to the center of the ring.

Our Tactical rings are available in 3 heights:
.850” high
.990” high
1.275" high.

If your scope has an objective greater than 56mm, we recommended .990” rings or higher.

One set of rings weighs in at approximately 4.8oz.
We recommend that you torque the crossbolts of our HD Rings to 65 inch pounds, and the top screws to 15 inch pounds.
1” Inch machined Delrin Inserts are available and sold separately to accommodate a 1” scope tube.

Made In The USA

Item Number Price  
61100 $125.00

 

EGW HD 30 MM Tactical Aluminum Rings .990 Inch

EGW’s bestselling rings are created in our American-made Fadal by machining aircraft grade aluminum from billet one pair of rings at a time.

We bore the holes to 30mm +.0014”. When we machine the profiles of the ring we build in a .030” radius on all outside edges. Next we machine a 45 degree bevel around the entire ring and clamp. We clamp the pair on a 30mm mandrill with a 1/8” pin to keep the pair exactly together. We then thread form and tap holes in the ring. Thread forming is 40% stronger than cut threads.

The rings are serial engraved before they are separated. One ring and cap has a decimal in front of the numbers so the caps match exactly. i.e. one ring will show “575” and its identical twin will show “.575”.

We then sand blast them for a matte finish and anodize them in Eastern Pennsylvania.

The cross bolt is made from chromoly steel in our turning centers, roll threaded in-house and heat treated and blued locally. The ring nut is beveled on both ends and an inset washer is used to keep the nut from scoring the finish on the clamp. The threads are roll formed for strength, fit (class 2a) and finish. The clamp is machined from billet and complete with radius and bevels, and anodized to the match rings.

Our rings are measured from where the ring sits on the top of the base, to the center of the ring.

Our Tactical rings are available in 3 heights:
.850” high
.990” high
1.275" high

If your scope has an objective greater than 56mm, we recommended .990” rings or higher.

One set of rings weighs in at approximately 4.8oz.
We recommend that you torque the crossbolts of our HD Rings to 65 inch pounds, and the top screws to 15 inch pounds.
1” Inch machined Delrin Inserts are available and sold separately to accommodate a 1” scope tube.

Made In The USA

Item Number Price  
61101 $125.00

 

EGW HD 30 MM Tactical Aluminum Rings 1.275 Inch

EGW’s bestselling rings are created in our American-made Fadal by machining aircraft grade aluminum from billet one pair of rings at a time.

We bore the holes to 30mm +.0014”. When we machine the profiles of the ring we build in a .030” radius on all outside edges. Next we machine a 45 degree bevel around the entire ring and clamp. We clamp the pair on a 30mm mandrill with a 1/8” pin to keep the pair exactly together. We then thread form and tap holes in the ring. Thread forming is 40% stronger than cut threads.

The rings are serial engraved before they are separated. One ring and cap has a decimal in front of the numbers so the caps match exactly. i.e. one ring will show “575” and its identical twin will show “.575”.

We then sand blast them for a matte finish and anodize them in Eastern Pennsylvania.

The cross bolt is made from chromoly steel in our turning centers, roll threaded in-house and heat treated and blued locally. The ring nut is beveled on both ends and an inset washer is used to keep the nut from scoring the finish on the clamp. The threads are roll formed for strength, fit (class 2a) and finish. The clamp is machined from billet and complete with radius and bevels, and anodized to the match rings.

Our rings are measured from where the ring sits on the top of the base, to the center of the ring.

Our Tactical rings are available in 3 heights:
.850” high
.990” high
1.275" high.

If your scope has an objective greater than 56mm, we recommended .990” rings or higher.

One set of rings weighs in at approximately 4.8oz.
We recommend that you torque the crossbolts of our HD Rings to 65 inch pounds, and the top screws to 15 inch pounds.
1” Inch machined Delrin Inserts are available and sold separately to accommodate a 1” scope tube.

Made In The USA

Item Number Price  
61102 $125.00

 

Barrett ExRINGS 30mm 20/30 MOA, Pinned Scope Rings

Dual MOA setting. Hard anodized black 7075 T6 aluminum. Fits 1913 rails. 30mm - 1.6'' High, 20/30 MOA.

Long-range shooters often encounter a common problem: Certain scope/rifle combinations don’t offer enough ‘up’ elevation adjustment in their scopes to allow the shooter to hit targets at the maximum range of their rifle systems. Dual MOA Barrett ExRings with Pin-Lock technology makes this issue a thing of the past.

With dual MOA settings, ExRings allow maximum use of the riflescope’s precise internal elevation adjustment by aligning the scope for long-range shooting. The front ring has a precision-fit pivot feature that allows the rear of the scope to be elevated at the rear ring with no chance of unwanted movement. The rear ring houses the Barrett Pin-Lock technology that allows you to select from two elevation settings by simply changing the location of a single pin.

Once an elevation setting is selected and the ring’s cross bolts are torqued to specification, Barrett ExRings become a rock-solid mount with the perfect MoA elevation for your particular long-range rifle setup. Barrett rings are made from high-strength 7075 T6 aluminum for long-term durability.

Last, but not least, ExRings also incorporate Barrett’s ZERO-GAP technology to give you 360 degrees of heavy-duty holding power under even the harshest recoil.

Close this window

Item Number Price  
13320 $230.00

 

UTG QD 30mm Mount, 2 Picatinny Slots, 40mm Mount Clearance, 120mm Base

• Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable to Fit on Any Picatinny Rail
• Clever Posi-lock Crossbar Design and Spring Tension Controlled Locking Plate with Steel Insert Guarantees Most Secured Installation
• Tight Tolerance Control and Repeatable Positive Locking for Optimal Re-zero
• High Quality Synthetic Tape Applied on Rings Internal Surface for Scope and Mount Protection
• Adjustable Quick Detach Lever Lock System
• Ring Top Picatinny Rail

 

 

 

 


Material: Aluminum/Steel
Weight: 7.1 oz
Pieces: 1
Rail Type: Picatinny/Weaver
Profile Level: Medium
Ring Diameter: 30mm
Ring Width: 22/22 mm
A: 30mm
B: 22/22mm
C: 15mm
D: 120mm
E: 40mm

 

Item Number Price  
M3B40090R2 $37.00

 

UTG Integral QD Offset Ring Mount, 30mm w/4 Picatinny Slots, 40mm Mount Clearance

• Bi-directional Design to Offer Needed Offset in Diverse Applications
• Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable to Fit on Any Picatinny Rail
• Clever Posi-lock Crossbar Design and Spring Tension Controlled Locking Plate with Steel Insert Guarantees Most Secured Installation
• Tight Tolerance Control and Repeatable Positive Locking for Optimal Re-zero
• High Quality Synthetic Tape Applied on Rings Internal Surface for Scope and Mount Protection
• Adjustable Quick Detach Lever Lock System
• Ring Top Picatinny Rail

 

 

 

 

Material: Aluminum/Steel
Weight: 8.9 oz
Pieces: 1
Rail Type: Picatinny/Weaver
Profile Level: High
Ring Diameter: 30mm
Ring Width: 22/40 mm
A: 30mm
B: 22/40mm
C: 22mm
D: 100mm
E: 40mm

 

Item Number Price  
M3S40070R4 $32.00
 
EGW Ring Inserts 1 Inch Delrin Inserts For a 30mm Rings

 

This set of inserts was designed to be used with our HD Tactical rings for customers that would like to use EGW's 30mm rings with a 1”  scope.

The inserts are double rimmed to ensure that no slip takes place. We have done testing in our facility and have never had any movement of a 1” or 26mm scope when used with our rings and these specially designed inserts.

Made from Delrin. Black in color.

2 per package (4 pieces total).

 

 

Made In The USA

 

 

 

Item Number Price  
60106 $15.00

 

EGW Ring Inserts 26mm Delrin Inserts For 30mm Rings

 

This set of inserts was designed to be used with our HD Tactical rings for customers that would like to use our 30mm rings with a 1” or 26mm scope.

The inserts are double rimmed to ensure that no slip takes place. We have done testing in our facility and have never had any movement of a 1” or 26mm scope when used with our rings and these specially designed inserts.

Made from Delrin. Black in color.

2 per package (4 pieces total).

 

 

Made In The USA

 

 

 

Item Number Price  
60107 $15.00

 

EGW Crossbolt and Nut

 

For use on EGW Tactical Rings and Extendarisers. Sold as a set. Set contains: 1 EGW Crossbolt 1 EGW Nut 1 Red Washer To be torqued to 60 INCH/LBS.

 

Made In The USA

 

 

 

 

 

 

 

Item Number Price  
90100 $8.00

 

34mm Rings

 

EGW HD 34MM Tactical Rings OPS2

 

34mm 1.125” optical center line.
Matched sets / 7075T6
Mil spec 8625 type III hardcoat
8-32 holes in the rear are for optional anti-cant module
These are PSR optic

 

 

Made In The USA

 

 

 

 

 

Item Number Price  
61103 $175.00 Out Of Stock

 

Dovetail To Weaver/Picatinny Adaptors

 

UTG Dovetail-to-Picatinny Low Profile Rail Adaptor

• .22/Airgun Dovetail to Picatinny/Weaver Rail Adaptor
• Innovative Rail Platform to Convert Most .22/Airgun Rails
• Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base
• Extremely Low Profile and Lightweight
• Precision and Repeatable Alignment
• Easy Installation with Most .22/Airgun Rails, 2PCs/Set
• Removable Stop Pin for Extra Secure Installation

 

Material: Aluminum
Weight: 0.18 oz
Pieces: 2
Rail Type: Picatinny/Weaver
Length: 1 inch
Width: 0.93 inch
Height: 0.24 inch

RIngs NOT Included

RIngs NOT Included

Item Number Price  
MNT-DT2PW01 $9.00
 

NcStar 3/8 Dovetail to Picatinny Adapter Rail -Short

• Low Profile 3/8 Dovetail to PicatinnyAdapter Rail - Short Length
• Rail attaches to 3/8 Dovetail rails and converts it to Picatinny Rail for mounting Red Dot optics with Weaver/Picatinny type rings and mounts.
• Two Integrated Set Screws for securing rail adapter in place.
• Length: 3.75"
• Weight: 1.0 oz.
• Black Anodized Aluminum Construction

 

 

angle01

angle01

angle01

Item Number Price  
MAD3/8PS $10.00
 
UTG Universal Dovetail to Picatinny/Weaver Rail Adaptor

• 5.7" Picatinny Top Rail with 14 Slots to Provide Flexible Eye Relief Adjustment and Mounting Flexibility of Various Optics

• Fits 9mm - 11mm Airgun/Shotgun Dovetail Rails

• Comes with 4 High Strength Screws and Adjustable Recoil Resistant Stop Pins Which Ensures Solid Locking and Zero Holding and is Designed to Resist Bidirectional Recoil Force

• Easily Slides On and Universally Fits Both Flat & Rounded Dovetail Receivers

• Precision Machined from Aircraft Aluminum and Finished with a Matte Black Hard Coat Anodize

• Saddle Height is 0.59"

Material: Aluminum
Weight: 2.4 oz
Length: 5.71 inch
Width: 0.84 inch
Height: 0.67 inch

Item Number Price  
MNT-DTW145 $19.00
 

 

Your privacy is important to us. Our Checkout page Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

 

Can't find what you are looking for???  Contact Us  with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes. 

  2017, The Country Shed

RESTRICTED ITEMS   Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed  does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws.  You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area.  Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle,  Handgun, Pistol, Assualt  Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers,  UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate,  MAKO,  Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!