UTG Mossberg 500 Weaver/Picatinny Style Shotgun Tactical Scope Mount

	Excellent quality and easy to install
	Weaver/Picatinny Style, tactical low profile for all scope applications
	5.5 inches (140mm) long with 13 slots on rail to allow for flexible eye relief adjustments
	Complete with screws for installation on Mossberg 500 Series and compatibles

Forend Included In Package

Forend NOT Included- Pistol Grip Only

Adjustable 4 Position Buttstock   Adjustable Neoprene Cheekrest   Recoil Reducing Buttpad   Interchangable Grip Inlays

New Ergonomic Forend Design   Non-Slip Forend Texture    Made in USA   Lifetime Warranty

	Mossberg* 500/535/590/835, 12 Gauge
	Winchester 1200/1300, 12 Gauge
	Remington 870, 12 Gauge

*The forend included in this package is only compatible to Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend.

Shown Fully Extended

Shown Collapsed

	Six Position Side Folding Tactical Shotgun Stock
	Buttstock Folds to Left Side of Receiver
	May be Fired from Folded Position
	Removable/Adjustable (3/8") Cheekrest
	Non-Slip Removable Rubber Buttpad
	6˚ Tube Drop Adapter for Recoil Comfort
	Textured Pistol Grip
	Limited Lifetime Warranty

	Mossberg 500/535/590/835, 12 Gauge
	Maverick 88, 12 Gauge
	Winchester 1200/1300, 12 Gauge
	Remington 870, 12 Gauge

Note: Some Minor Modification may be Required.

Forend NOT Included

	Six Position Collapsible/Side Folding Tactical Shotgun Stock
	Buttstock Folds to Left Side of Receiver
	May be Fired from Folded Position
	Removable/Adjustable (3/8") Cheekrest
	Non-Slip Removable Rubber Buttpad
	Tactical Forend with 3 Picatinny Rail Locations
	Picatinny Rails Allow for Easy Installation of All You Favorite Accessories
	6˚ Tube Drop Adaptor for Recoil Comfort
	Tactical Shotgun Picatinny Rail Package One Left 2" Picatinny Rail One Right 2" Picatinny Rail One 2" Bottom Picatinny Rail
	Three Blank Inserts for When Rails are Not in Use.
	Textured Pistol Grip
	Constructed of Military Grade DuPont® Extreme Temperature Glass Reinforced Polymer
	Limited Lifetime Warranty

	Mossberg* 500/535/590/835, 12 Gauge
	Remington 870, 12 Gauge
	Winchester 1200/1300, 12 Gauge

Note: Some Minor Modification may be Required.

	Steel Formed Shotgun Heatsheild
	Elongated Cooling Slots for Maximum Dissipation of Heat for Ulitmate Protection Against Burns
	Easy Installation - Simply Slide Over Barrel and Secure with Supplied Hardware
	Matte Black Finish
	13-1/2" Long

Fits most 12, 16 and 20 Gauge and .410 pump shotgun barrels

Note: Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns

SHS1300 Heat shield Shown Above On Shotgun

SBS4600 Shown Above

SBS4600 Shown On Weapon

MHS 4800 Shown Above

MHS 4800 Shown Above On Shotgun

FEATURES: Compact carry. Stock changes length of pull from 9-1/4" to 13-1/4". Sling swivel studs. Made in USA and comes with Lifetime Warranty.

	Improves Shooting Accuracy
	Provides a Stronger Grip
	Reduces fatigue when shooting Slugs and Turkey Loads
	6 Position Buttstock With Pistol Grip & Buttpad
	Stock Can Adjust Length Of Pull From 9 1/4” to 13 3/4”
	Sling Swivel Stud
	Includes Rubber Buttpad
	DuPont® Extreme Temperature Glass Reinforced Polymer

	Mossberg* 500/535/590/835, 12 Gauge
	Winchester 1200/1300, 12 Gauge
	Remington 870, 12 Gauge

Note: Some Minor Modification may be Required.300.

	Improves Shooting Accuracy
	Provides a Stronger Grip
	Reduces fatigue when shooting Slugs and Turkey Loads
	No Jamming! Designed NOT to overlap the shotgun's receiver when cycling the pump action, thereby reducing the chance of a momentary jam by sling or clothing
	Rubber Buttpad
	Non-Slip Pebble Grain Grip
	Sling Swivel Stud
	Easy Installation
	DuPont® Extreme Temperature Glass Reinforced Polymer

	Mossberg* 500/535/590/835, 12 Gauge
	Remington 870, 12 Gauge
	Winchester 1200/1300, 12 Gauge

*The forend included in this package is only compatible to Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend.

Fits Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns
Note Some Minor Modification may be Required.
*The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Magazine Tubes with a Minimum Length of 6 ¼ Inches Long for use of this Product.

Fits Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns
Note Some Minor Modification may be Required.
*The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Magazine Tubes with a Minimum Length of 6 ¼ Inches Long for use of this Product.

SFP0300 shown below on weapon

Every Tactical Shotgun Forend includes Mounting Hardware and Adapter Kit which allows installation to:

	Mossberg* 500/535/590/835, 12 Gauge
	Remington 870, 12 Gauge
	Winchester 1200/1300, 12 Gauge

*The forend included in this package is only compatible to Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend.

Scope Not Included

Scope, Forend, and Gun Not Included

Does Not Include Scope

Does Not Include Forearm

Polymer one piece forend for Mossberg 500 / 590 12 ga. pump shotgun. Provides a rigid lightweight Picatinny platform ideal for lights / lasers.

• Full length lower Picatinny rail
• Two side rails are ideal for mounting light / laser devices
• Easy to fit and remove
• Constructed of high density polymer

Lower handguard accessory rail system for the Mossberg 500/590 Shotgun, compliant with MIL-STD 1913. Specifically designed and manufactured to provide a rigid ultra-light platform on which to mount virtually any mission-specific accessory.

Features:
* Lower rail to enable either foregrip, flashlight or laser mounting.
* Two optional side rails for flashlight and laser mounting.
* Compliant with MIL-STD 1913.
* No gunsmithing required.
* Manufactured from reinforced plastic composite.
* Super light weight.

Choate introduces its new line of Picatinny rail forends. If you are looking for a less expansive solution to making your shotgun a tactical entry or home defense weapon, then we have the forend for you. Our forend kit includes a forend with pre-drilled holes and a 1-1/2 inch piece of picatinny rail. To attach our rail at 3-6-9 o'clock position, you simply use a Phillips head screwdriver and screw in 4 screws (provided). It accepts all tactical light mounts that fit on 1913 picatinny style rails. This includes Surefire®, Streamlight®, Pelican®, Pentagon® and Glock lights®.

Choate introduces its new line of Picatinny rail forends. If you are looking for a less expansive solution to making your shotgun a tactical entry or home defense weapon, then we have the forend for you. Our forend kit includes a forend with pre-drilled holes and a 1-1/2 inch piece of picatinny rail. To attach our rail at 3-6-9 o'clock position, you simply use a Phillips head screwdriver and screw in 4 screws (provided). It accepts all tactical light mounts that fit on 1913 picatinny style rails. This includes Surefire®, Streamlight®, Pelican®, Pentagon® and Glock lights®.

Choate Synthetic Forends go great with our pistol grips and Conventional Stocks. Made of fiberglass filled plastic, they look good and will last a lifetime. (No forend for Mossberg 5500/9200). Mossberg 835 forends are shorter than standard Mossberg 500 forends.

Choate Machine & Tool's MK5 Conventional Stock features our new spacer system which was originally designed for the police and military for use with the latest body armor; however, they work great for the hunter and recreational shooter as well. These stocks have our innovative spacer system and come with two 1/2" spacers included which adjusts the length of pull from 13" to 14".You can lengthen your stock by simply adding new spacers and longer screws. Our stocks are made of the finest materials available and carry our lifetime warranty. features our new spacer system which was originally designed for the police and military for use with the latest body armor; however, they work great for the hunter and recreational shooter as well. These stocks have our innovative spacer system and come with two 1/2" spacers included which adjusts the length of pull from 13" to 14".You can lengthen your stock by simply adding new spacers and longer screws. Our stocks are made of the finest materials available and carry our lifetime warranty.

Choate Machine & Tool's MK5 Conventional Stock features our new spacer system which was originally designed for the police and military for use with the latest body armor; however, they work great for the hunter and recreational shooter as well. These stocks have our innovative spacer system and come with two 1/2" spacers included which adjusts the length of pull from 13" to 14".You can lengthen your stock by simply adding new spacers and longer screws. Our stocks are made of the finest materials available and carry our lifetime warranty.

This stock reduces felt recoil and muzzle climb to make follow-up shots faster and more accurate. Single-handed firing is also made much easier.The stock is made of tough fiberglass filled plastic and comes with a 1" rubber recoil pad and a quick detach swivel stud. These stocks have our innovative spacer system and come with two 1/2" spacers included which adjusts the length of pull from 13" to 14".

This stock reduces felt recoil and muzzle climb to make follow-up shots faster and more accurate. Single-handed firing is also made much easier.The stock is made of tough fiberglass filled plastic and comes with a 1" rubber recoil pad and a quick detach swivel stud. These stocks have our innovative spacer system and come with two 1/2" spacers included which adjusts the length of pull from 13" to 14".

Same great attributes as Mark 5 conventional stock but has an 11 3/4 inch length of pull.

Same great attributes as Mark 5 conventional stock but has an 11 3/4 inch length of pull.

Our Mark 6 stock has all the features of the Mark 5 stocks and will hold five rounds in the bottom. It will take 2 3/4 to 3 1/2 inch 12 ga. shells, you can adjust how hard the shells are to remove by tightening the adjustment screws on the side of the shell holder. Can be special ordered in orange for less than lethal guns.

These stocks are made of the same fiber filled polypropylene as all of our black stocks. The die has been changed in order to achieve the Olive Drab Green and the Less than Lethal Orange coloring. The bright Orange of our less than lethal firearm stock gives quick recognition for police officers. The Mark 6 was actually designed for Less than Lethal shot. The shell holder in the butt stock allows the user to see what type of shell he is choosing before removing the shell from the shell carrier. This saves time and helps to insure proper use of different shot shells. When fully loaded the Mark 6 stock carries 5 extra shells. The shell carriers can be individually adjusted to ensure a tight hold on the shot shell and accommodates all 12 gauge shells from 2-3/4" to 3-1/2" inches in length.

These stocks are made of the same fiber filled polypropylene as all of our black stocks. The die has been changed in order to achieve the Olive Drab Green and the Less than Lethal Orange coloring. The bright Orange of our less than lethal firearm stock gives quick recognition for police officers. The Mark 6 was actually designed for Less than Lethal shot. The shell holder in the butt stock allows the user to see what type of shell he is choosing before removing the shell from the shell carrier. This saves time and helps to insure proper use of different shot shells. When fully loaded the Mark 6 stock carries 5 extra shells. The shell carriers can be individually adjusted to ensure a tight hold on the shot shell and accommodates all 12 gauge shells from 2-3/4" to 3-1/2" inches in length.

These stocks are made of the same fiber filled polypropylene as all of our black stocks. The die has been changed in order to achieve the Olive Drab Green and the Less than Lethal Orange coloring. The bright Orange of our less than lethal firearm stock gives quick recognition for police officers. The Mark 6 was actually designed for Less than Lethal shot. The shell holder in the butt stock allows the user to see what type of shell he is choosing before removing the shell from the shell carrier. This saves time and helps to insure proper use of different shot shells. When fully loaded the Mark 6 stock carries 5 extra shells. The shell carriers can be individually adjusted to ensure a tight hold on the shot shell and accommodates all 12 gauge shells from 2-3/4" to 3-1/2" inches in length.

Our side folding shotgun stocks must be used with our minimum length spool forend, which is included with the folder kit. The folders are made of 4140 steel and fiberglass filled plastic.They come with a 3/4" recoil pad and sling loops. (No forend with the Winchester-1400 or Fabarm FP6)

There are several advantages to having a Pistol Grip Forend. By holding the gun in a more natural position, it is easier to control and aim. It also protects the shooter's hand from slipping off the forend during rapid fire. These pistol grip forends are constructed of fiberglass reinforced polymer and will give a lifetime of shooting performance. Mossberg 835 forends are shorter than standard Mossberg 500 forends.

The 835, 590 and newer 500 have a shorter fored that the old 500. If you have a question about which one you need please call us.There are several advantages to having a Pistol Grip Forend. By holding the gun in a more natural position, it is easier to control and aim. It also protects the shooter's hand from slipping off the forend during rapid fire. These pistol grip forends are constructed of fiberglass reinforced polymer and will give a lifetime of shooting performance. Mossberg 835 forends are shorter than standard Mossberg 500 forends.

Makes the shotgun easier to conceal and maneuver in tight places. Angle and shape of grip gives the shotgun good control while shooting. fiberglass reinforced polymer and will give a lifetime of shooting performance. Mossberg 835 forends are shorter than standard Mossberg 500 forends.

When fully loaded the Mark 6 stock carries 5 extra shells. The shell carriers can be individually adjusted to ensure a tight hold on the shot shell and accommodates all 12 gauge shells from 2-3/4" to 3-1/2" inches in length

Avoid spring failure by using one of our High Visibility Shell Followers. It will protect your spring and you will be able to tell from a glance if your gun is loaded or not with the Hunter Orange Color of the follower.