The Country Shed 

Mounts and Scopes Tactical Shotgun Meat Processing Heated Gloves & Socks SAKO Tikka Beretta
Holsters Rifle Bases

Fishing Equipment

Handgun / Pistol

DVD's and CD's

Rifle Stocks High Capacity Magazines Tools Books Sling Shots
Flashlights & Lasers Shotgun Stocks Survival Gear

Special Closeouts

General Accessories

Home Contact Us Ordering Shipping & Policies Links What's New & Hot Gift Ideas Join Email List Special Closeouts

 

Choate and Command Arms Remington Stocks

Choate and Command Arms Remington Shotgun Stocks including, synthetic, standard, folding, top folding, side folding, skeleton, pistol grips, forends, lightweight, youth, body armor, 1100, 1187, 870 for military, home defense, and law enforcement.

Disassembly/Reassembly Guide for Remington 1100/11-87 Shotguns

DISASSEMBLY & REASSEMBLY GUIDE
Remington 1100 & 11-87 Shotguns (2006)

remington 1100 11-87 manual book remington 1100 1187 manual guide book

FEATURES:

•  The only current printed manual that includes information
    on ALL models.
•  Easy to use -- Comb binding lies open and flat on your
    work surface.
•  16 pages & 20+ high-resolution grayscale images.
•  Cardstock cover. Bright white paper.

 

 

Introduction :
Model 1100 & 11-87
Exploded Part Diagrams
( 70+ parts - 4 Pages)

Disassembly

- Safety
- Magazine Cap
- Fore-End
- Barrel
- Gas Cylinder Collars
Trigger Group Assembly
- Carrier & Carrier Dog
- Rear Trigger Pin Sleeve
- Sear Spring
- Trigger Pin
 
Disassembly (cont.)
- Trigger
- Sear
- Hammer Assembly
- Safety
- Operating Handle
- Feed Latch & Action Bar
- Bolt Assembly
- Extractor
- Magazine Tube & Spring
- Stock

Resassembly Tips
- Trigger Assembly
- Other Tips

Excerpt from this Guide:

Model 1100

In 1967, the Remington Model 1100 forever changed the way American shooters viewed autoloading shotguns. It was the first autoloader to combine the repeat-shot versatility of early-century models with the sleek, modern lines and handling qualities of revered double barrels. It’s been a field-proven favorite ever since. Its superb balance, handling, durability and soft recoil from the gas operated action are the foundation of the Remington autoloading legacy. In 2004, Remington added a new 20-gauge model in the Classic Field design.

Model 11-87: RELIABILITY WITH 3 1/2 " CAPABILITY.

In 1987, Remington introduced the Model 11-87. The unmatched versatility of the Model 11-87 Super Magnum results from the unique metering system of its patented gas-operated action. With 2 3/4" field loads, an integral pressure relief valve remains closed, utilizing all of the shell’s pressure to operate the action. When heavier shells are used, the valve opens proportionately to release the unneeded pressure – retaining just the right amount to operate the action. This not only assures reliable handling of all shell sizes, but prevents excessive bolt velocity that could increase wear. Cumulative production total for the Remington 1100 and 11-87 exceeds 4.5 million.

Most components parts are identified using ALL CAPITAL LETTERS. Please refer to the diagram on pages 3 ~ 6.
Prior to disassembly, we recommend a thorough examination of the current position and relationship of each part and assembly.

Item Number Description Price  
 GG1100 DR Gun Guides for Remington 1100/11-87 Shotgun Disassembly/Reassembly Guide $8.00

 

Disassembly/Reassembly Guide for Remington 870 Shotguns

DISASSEMBLY & REASSEMBLY GUIDE
Remington 870 Shotgun (2006)

remington 870 guide manual book book remington 870 manual

FEATURES:

•  The only current printed manual that includes
    information on ALL models.
•  Easy to use -- Comb binding lies open and flat on
    your work surface.
•  16 pages & 20+ high-resolution
   grayscale images.
•  Cardstock cover. Bright white paper.

 

 

 

 

 

Introduction:
Model 870
Exploded Part Diagrams ( 70+ parts - 4 Pages)
Disassembly
Safety
Action Bar Lock
Barrel & Magazine Spring
Trigger Assembly
- Advanced - Carrier & Carrier Dog
- Advanced - Rear Trigger Pin Sleeve
- Advanced - Sear Spring
- Advanced - Trigger Pin
- Advanced - Trigger
- Advanced - Sear
- Advanced - Hammer Assembly
- Advanced - Safety
Forend Tube Assembly
Bolt
Model 870 Magnum Only Instructions
Firing Pin
Extractor
Stock

Reassembly Tips

The Remington Arms Co. 1816 ~ 2004

Excerpt from this Guide:

The Remington 870 is the most popular shotgun ever made.

Period. Since it’s introduction in 1950 through 2003, Remington has produced 8,726,789 model 870s. Today it is still the standard for which all other pump-action shotguns are made. And because they practically never wear out, there are more Model 870s in use today than any other shotgun.

870’s are currently offered in 12-gauge, Super Magnum 12, 16, 20, 28-gauge, and 410 bore.

The 870 Wingmaster combines unique, timeless solid steel design and rugged reliability with a custom-quality finish.

The model 870 is available is several configurations including youth models, Super Magnum, Special Purpose Deer and Turkey guns, Express, Combo, Camo, and Marine Magnums.

In the spring of 2005, Remington will introduce a new Model 870 SPS-T™ Super Magnum™ with a thumbhole Mossy Oak® Obsession® camo stock.

Item Number Description Price  
 GG870 DR Gun Guides for Remington 870 Shotgun Disassembly/Reassembly Guide $8.00

 

Practical Guide to the Operational Use of the Remington 870 Pump Shotgun

Authored and published in a joint effort by former Special Forces personnel from Blackheart International.

Soft-Cover, 52 pages.

Over 50 color pictures!

Great for weapons familiarization classes.

The objective of this manual is to allow the reader to be able to competently use the Remington 870 Pump Shotgun.

The manual will give the reader:
-background/specifications of the weapon
-instructions on its operation
-disassembly and assembly procedures
-proper firing procedures
-malfunction/misfire procedures

Operator level maintenance will also be detailed to allow the reader to understand and become competent in the use and maintenance of the Remington 870 Shotgun.

 

 

 

 

 

 

 

Item Number Price  
BH-PG-115 $17.00

 

KickLite Remington Tactical Stock Package

FITS: Remington 870 12 gauge model only.

-Patented KickLite recoil suppression technology utilizes heavy duty spring to reduce recoil for up to 50%

Designed with shooters of all sizes, strengths and body types in mind, the Kicklite Tactical Series replacement stock package features the popular tactical stock and is fitted with our exclusive patent pending Kick Lite Recoil Reduction System - Engineered to greatly reduce the perceived felt impact of shotgun loads. Extremely popular with female shooters, youth and smaller framed individuals and even the 'big guys' who could do with out the shoulder pain associated with a day in the field. The best combination of quality, value and versatility on the market today. Includes... 6 position tactical stock (Length of pull: 11.5" - 15"), Fully integrated and maintenance free Kick lite recoil reduction system, recoil reduction butt pad, pistol grip, sling swivel, shot shell carrier - mounts on either side of stock. (Hold 12 gauge shells only), and forend.  Made in USA. Injection molded of premium grade glass filled nylon and shock absorbing elastomers. All installation hardware and tools included. No gunsmithing. Warranty. 

Made In The USA

 

 

 

Forend Included

Remington Tactical Dark Earth Shown above. This package does NOT come with picatinny rails on forearm.

Item Number   Price  
KLT002 Phoenix Tech KickLite Remington 870 12 ga Tactical Stock Package - Black $119.00
KLT002S Phoenix Tech KickLite Remington 870 12ga Tactical Stock Package - Sandstorm $119.00
KLT002DE Phoenix Tech KickLite Remington 870 12ga  Tactical Stock Package - Dark Earth $119.00 Out Of Stock

Remington Field Series Tactical Stock

Same as the Kicklite Series above, except this stock does NOT have the recoil Reduction System and does NOT include a forend. It is a standard 6 position stock with NO RECOIL REDUCTION SYSTEM and NO FOREND. 

Item Number   Price  
RTS750B Phoenix Tech Field Series Remington 870 Tactical Stock 12 ga-  (No recoil Reduction System and No Forend) - Black $60.00
RTS750SS Phoenix Tech Field Series Remington 870 Tactical Stock 12 ga-  (No recoil Reduction System and No Forend) - Sandstorm $60.00

 

KickLite Remington Sporter Package

FITS: 12 gauge Remington 870.

-Patented KickLite recoil suppression technology utilizes heavy duty spring to reduce recoil for up to 50%

Designed with shooters of all sizes, strengths and body types in mind, the Kicklite Sporter Series replacement stock package features a sleek yet rugged sporter stock with pistol grip and is fitted with our exclusive patent pending Kick Lite Recoil Reduction System - Engineered to greatly reduce the perceived felt impact of shotgun loads. Extremely popular with female shooters, youth and smaller framed individuals and even the 'big guys' who could do with out the shoulder pain associated with a day in the field. The best combination of quality, value and versatility on the market today. Includes... Sporter style stock , Fully integrated and maintenance free Kick lite recoil reduction system, recoil reduction butt pad, pistol grip. sling swivel, and Forend. Made in USA. Injection molded of premium grade glass filled nylon and shock absorbing elastomers. All installation hardware and tools included. No gunsmithing. Warranty. 

Made In The USA

 

 

Forend  Included

Item Number   Price  
  KLS002 Phoenix Tech KickLite Remington 870 12ga Sporter Package - Black $99.00
KLS002S Phoenix Tech KickLite Remington 870 12ga Sporter Package - Sandstorm $99.00
KLS002DE Phoenix Tech KickLite Remington 870 12ga Sporter Package - Dark Earth $99.00

Remington 870 Field Series Sporter Stock

Same as the Kicklite Series above, except this stock does NOT have the recoil Reduction System and does NOT include a forend. It is Sporter stock with NO RECOIL REDUCTION SYSTEM and NO FOREND. 

Item Number   Price  
RSS750B Phoenix Tech Field Series Remington 870 Field Series Sporter Stock 12 ga-  (No recoil Reduction System and No Forend) - Black $50.00
RSS750SS Phoenix Tech Field Series Remington 870 Field Series Sporter Stock 12 ga-  (No recoil Reduction System and No Forend) - Sandstorm $50.00

 

Phoenix Tech Remington Rear Pistol Grip

FITS: 12/20 gauge Remington 870.

Remington Rear Pistol Grip: Rugged, one piece grip with textured finish and comfortable ergonomic design for optimal comfort and performance. Includes, optional 'end cap' cover plate. Injection molded in USA of premium grade glass filled nylon. All assembly hardware included.


Made In The USA

Forend NOT Included- Pistol Grip Only

Item Number   Price  
RGP02B Phoenix Tech Remington 870 12/20 ga Rear Pistol Grip - Black $21.00
  RPG02S Phoenix Tech Remington 870 12/20 ga Rear Pistol Grip - Sandstorm $21.00
RPG02DE Phoenix Tech Remington 870 12/20 ga Rear Pistol Grip - Dark Earth $21.00

 

Phoenix Tech Winchester and Remington Shotgun Forend

FITS: 12 ga. Remington 870 and Winchester 1200/1300

Standard Forend. Rugged one piece design with sure grip grooves and textured surface provide an ideal upgrade for your shotgun. Installation is a breeze with the included gunsmith quality forend wrench. Minimal firearm disassembly required. Made in USA of premium grade glass filled nylon. FITS: Remington 12 gauge model 870. Winchester 12 gauge 1200/1300. ** Forend wrench does not work on removal of existing forends with recessed slide tube nut.***

 

Ergonomic grooved and textured Forend.

Quick and easy installation

Item Number   Price  
SFM1201B Phoenix Tech 12 GA Remington 870 and Winchester 1200/1300 Forend - Black $20.00
SFM1201S Phoenix Tech 12 GA Remington 870 and Winchester 1200/1300 Forend - Sandstorm $20.00
SFM1201DE Phoenix Tech 12 GA Remington 870 and Winchester 1200/1300 Forend - Dark Earth $20.00

 

Phoenix Tech Winchester and Remington Shotgun Tactical Forend With Rail

 

FITS: 12 ga. Remington 870 and Winchester 1200/1300

 

Standard Forend Predrilled to accept 4  2" Picatinny rails. Rails & Screws included. Rugged one piece design with sure grip grooves and textured surface provide an ideal upgrade for your shotgun. Installation is a breeze with the included gunsmith quality forend wrench. Minimal firearm disassembly required. Made in USA of premium grade glass filled nylon. Rails are black on all models.

 

 

MADE IN THE USA

 

 

 

 

 

 

 

Item Number   Price  
TFP02B Phoenix Tech Tactical 12 GA Remington 870 and Winchester 1200/1300 Forend With Rails - Black

 

$30.00
TFP02S Phoenix Tech Tactical 12 GA Remington 870 and Winchester 1200/1300 Forend With Rails - Sandstorm $30.00
TFP02DE Phoenix Tech Tactical 12 GA Remington 870 and Winchester 1200/1300 Forend With Rails - Dark Earth $30.00

 

Tapco Intrafuse Remington T6 Stock Set

There is no better home defense weapon than the 12 gauge shotgun.  Designed to make the weapon more ergonomic and compact, the TAPCO T6 Shotgun System provides the shooter with a six-position adjustable stock and a SAW-Style pistol grip.  For added comfort, the T6 Stock also comes standard with our rubber buttpad.  Constructed of high-strength composite, our stock is rugged enough for years of use and comes with a lifetime warranty. Marked “TAPCO USA”.

 

This item includes ONLY the stock assembly, pistol grip and buttpad.

Fits the Remington 870 and Ultra 87

Item Number Price  
STK55160 $70.00

 

Adv Tech Tactical Shotgun Adjustable Side Folding Stock and Forend with Scorpion Recoil System

Six Position Adjustable Side Folding Stock with Scorpion Recoil System, Adjustable Cheekrest and Tactical Forend

 

 

 

•Six Position Collapsible / Side Folding Buttstock
•Buttstock Folds to Left Side of the Receiver
•New and Improved Pivot Housing Assembly
•Scorpion Recoil System
-Scorpion Razorback Recoil Pad – Non-Slip, Removable
-Scorpion Recoil Pistol Grip – Ergonomic, Sure-Grip Texture
-Recoil Impact is Absorbed – Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter
-Reduces the Challenge of Reacquiring the Target by Minimizing the Muzzle Lift
-Not Affected by Chemicals
-Remains Flexible in Extreme Temperatures
-Eliminates the Felt Punch of the Recoil
-Removes Limitations from Spring and Piston Type Recoil Suppression System
•Tactical Shotgun Forend
?Rail Locations at 90° Around the Circumference of the Forend
-Two 2” Picatinny Rails
•Removable/Adjustable Cheekrest (3/8”)?
•3M Industrial Grade Self-Adhesive Soft Touch Cheekrest Pad?
•3M Industrial Grade Self-Adhesive Tactical Shotgun Thumb Pad Provides Extra Comfort when Shooting while Reducing Wear on Shooter
•6° Drop Tube Adapter for Recoil Comfort
•DuPont® Extreme Temperature Glass Reinforced Polymer Stock
•Manufactured in the USA
•Limited Lifetime Warranty
Fits Most 12 Ga Mossberg* 500/535/590/835, Remington 870 and Winchester* 1200/1300 Shotguns

Mount Patent # 6,374,528 B1?

MADE IN THE USA

Note *The Forend Included in this Package are Compatible with: (1) Mossberg Shotguns with a Removable Forend, any Mossberg Shotgun Newer than 2006 should be Checked to ensure that it has a Removable Forend. (2) Winchester Magazine Tubes with a Minimum Length of 6 ¼ Inches are Required? for use of this Product.

*Six Degree Drop tube Adapter included for use with Iron Sights?

*The Forend Pistol Grip (FPG0100) can not be fastened to the bottom picatinny rail of this Forend.

 

 

 

 

 

 

 

 

 

 

Item Number Price  
A.1.10.1130 $120.00

 

ATI Tactical Shotgun Adjustable Side Folding Stock with Scorpion Recoil System

Six Position Adjustable Side Folding Stock with Scorpion Recoil System and Adjustable Cheekrest

Fits Most 12 Ga Maverick 88, Mossberg 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns

•Six Position Adjustable/Side Folding Stock
•Stock Folds to Left Side of Receiver
•New and Improved Pivot Housing Assembly
•Scorpion Recoil System
-Scorpion Razorback Recoil Pad – Non-Slip, Removable
-Scorpion Recoil Pistol Grip – Ergonomic, Sure-Grip Texture
-Recoil Impact is Absorbed – Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter
-Reduces the Challenge of Reacquiring the Target by Minimizing the Muzzle Lift
-Not Affected by Chemicals
-Remains Flexible in Extreme Temperatures
-Eliminates the Felt Punch of the Recoil
-Removes Limitations from Spring and Piston Type Recoil Suppression System
-Removable/Adjustable Cheekrest ?
-3M Industrial Grade Self-Adhesive Soft Touch Cheekrest Pad?
-3M Industrial Grade Self-Adhesive Tactical Shotgun Thumb Pad Provides Extra Comfort when Shooting while Reducing Wear on Shooter
•6° Drop Tube Adapter for Recoil Comfort
•DuPont® Extreme Temperature Glass Reinforced Polymer Stock
•Manufactured in the USA
•Limited Lifetime Warranty

Fits Most 12 Ga Maverick 88, Mossberg 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns

Note: Sling Swivel Studs Accepts ATI's Sling Swivel (Part # A.5.10.2506) or any Standard Sling Swivel ???

*Six Degree Drop tube Adapter included for use with Iron Sights??

 

 

 

 

 

Forend NOT Included

Forend NOT Included

Forend NOT Included

Forend NOT Included

Forend NOT Included

Forend NOT Included

Item Number Price  
A.1.10.1135 $100.00

 

Adv Tech Top Folding Stock
The ultimate compact, tough design. Shotgun functions in open or closed position. Includes rear pistol grip. Quick release button allows buttstock to fold/unfold instantly. Sling swivel stud included. Reversible for right or left-handed shooters. Includes adapters and mounting hardware to fit 12 GA and 20 GA. Mossberg 500/590/835, Maverick 88, Remington 870, and Winchester 1200/1300 pump shotguns. Norinco 98 Series - Law enforcement only

 

 

 

 

 

Item Number Price  

Top Fold Stock Open

Top Fold Stock Closed

TFS0600 $78.00

 

Adv Tech Remington Marine Top Folding Stock
Perfect for Marine and Wet-Weather environments! The ultimate compact, tough design. Shotgun functions in open or closed position. Includes rear pistol grip. Quick release button allows buttstock to fold/unfold instantly. Sling swivel stud included. Reversible for right or left-handed shooters. Adapters included. Stock is pre-drilled to accept the Shotshell Holder Item #SHO0500, sold separately. Also Accepts Ghost Sights item # TFS0650, sold separately. Scratchproof and Weatherproof. Made in the USA of Black, Glass-Filled Nylon and comes with Lifetime Warranty. Fits 12 & 20 Gauge Mossberg 500/590/835, Maverick 88, Remington 870, Winchester 1200/1300, Maverick 88 and Norinco 98 Series

Item Number  Description Price  
MTF 4900 Adv Tech Marine Top Folding Stock $99.00

 

Adv Tech Remington 7600 Top Folding Buttstock

Functions in open or closed position. Includes rear pistol grip. Sling swivel stud reversible for right or left-handed shooters. Fits Remington 7600, 760, 740, AND 7400 Pump Action and Semi-Auto Rifles in all calibers!

Sling Swivel Stud, Ambidextrous, Lifetime Warranty from Advanced Technology, Quick Release Button Allows to Fold/Unfold Instantly, Made in the USA

Does not include foregrip 

Item Number Price  
REM7300 $67.00

 

Adv Tech Ghost Ring Sights Adaptor for Adv Tech Top Folding Stocks

Allows use of heatshield with ghost-ring sights on our Top-Folding Stocks by re-mounting the ghost-ring sight from the heatshield to the top of the pistol-grip.

 

 

 

 

Item Number Price  
TFS0650 $6.00

 

ATI Remington 7600 Pistol Grip Stock With Scorpion Recoil Pad

Full Length Design for Maximum Control!
•Improves Shooting Accuracy
•Provides a Stronger Grip
•Scorpion Recoil Pad
-Recoil Impact is Absorbed
-Shooting any Load Size can now be Done with no Pain Being Transferred to the Shooter
-Reduces Challenges to Reacquire the Target by Minimizing the Muzzle Lift
-Not Affected by Chemicals
-Remains Flexible in Extreme Temperatures
-Eliminates the Punch of the Recoil
-Removes Limitations from Spring and Piston Type Recoil Suppression Systems
•Slim Ergonomically Designed
•Uses Factory Stock Bolt
•Non-Slip Pebble Grain Grip
•Sling Swivel Stud
•Easy Installation
•DuPont® Extreme Temperature Glass Reinforced Polymer
•Manufactured in the USA
•Limited Lifetime Warranty

Fits Most Remington 7600

Note: Sling Swivel Studs Accepts ATI's Sling Swivel (Part # A.5.10.2506) or any Standard Sling Swivel?

Forearm NOT Included

Forearm NOT Included

Item Number Price  
REM7200 $49.00

 

Adv Tech  Shotgun Heat Shield

Give Your Shotgun a Personality of Its Own

bulletSteel Formed Shotgun Heatsheild
bulletElongated Cooling Slots for Maximum Dissipation of Heat for Ulitmate Protection Against Burns
bulletEasy Installation - Simply Slide Over Barrel and Secure with Supplied Hardware
bulletMatte Black Finish
bullet13-1/2" Long
Every Shotgun Heatshield includes Mounting Hardware for installation to:
bulletFits most 12, 16 and 20 Gauge and .410 pump shotgun barrels 

Note: Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns

SHS1300 Heat shield Shown Above On Shotgun

Item Number Price  
SHS1300 $25.00

 

Adv Tech SHOTFORCE Deluxe Heatshield with Mounted Ghost Ring Sights

Give Your Shotgun a Personality of Its Own

bulletSteel Heatshield
bulletElongated Cooling Slots
bulletMatte Black Finish
bulletAR-15 Style Fixed Nylon ghost Ring Sights
bullet13-1/2" long
Note: Heatshield must be "slotted" and ghost ring sights removed when used on scoped rifles.

Every Deluxe Heatshield with Ghost Ring Sight includes Mounting Hardware and Adapter Kit which allows installation to:
bulletFits most 12, 16 and 20 Gauge and .410 pump shotgun barrels

Note: Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns

 

SBS4600 Shown Above

SBS4600 Shown On Weapon

SBS4600 Shown On Weapon

Item Number Price  
SBS4600 $28.00

 

Adv Tech Standard Halo Heatshield For Remington 870 12 Ga Shotguns

Fits 12 Ga Remington 870 Shotguns

ATI is proud to introduce the Halo  Heatshield. The Halo Heatshield is the industry’s first ever “Free Floating” Heatshield. The rear of  the Heatshield is secured to the rear of the barrel with a DuPont® Extreme Temperature Polymer Clip while the front of the Heatshield is suspended  above the shotgun barrel by two DuPont® Extreme Temperature Polymer V Blocks. Both the Rear Clip and Front V Blocks include an underlying High Temp Resistant Silicon pad that can withstand temperatures in excess of 600˚F.

 

 

 

bulletThe Industry’s First Ever Free Float Style Design to Prevent any Metal to Metal Contact Between the Heatshield and Shotgun Barrel
bulletConstructed of High Strength Steel With Matte Black Powder Coating
bulletDuPont® Extreme Temperature Polymer Clip and V Blocks Secure the Heatshield to the Shotgun Preventing Sliding and Movement of the Heatshield
bulletHigh Temp Resistant Silicon Pads Protect the Shotgun Barrel Finish
bulletIncludes Aluminum CNC Machined ATI Dovetail Picatinny Rail Attachment (Rail not included)
bulletFits With or Without a Mag Extension
bulletManufactured in the USA
bulletLimited Lifetime Warranty

Item Number   Price  

A.5.10.2480

Adv Tech Standard Halo Heatshield For 12 GA Remington 870 $40.00

 

Deluxe Halo Heatshield with Ghost Ring Sights For Remington 870 12 Ga Shotguns

 

Fits 12 Ga Remington 870 Shotguns

ATI is proud to introduce the Halo  Heatshield. The Halo Heatshield is the industry’s first ever “Free Floating” Heatshield. The rear of  the Heatshield is secured to the rear of the barrel with a DuPont® Extreme Temperature Polymer Clip while the front of the Heatshield is suspended  above the shotgun barrel by two DuPont® Extreme Temperature Polymer V Blocks. Both the Rear Clip and Front V Blocks include an underlying High Temp Resistant Silicon pad that can withstand temperatures in excess of 600˚F.

 

 

bulletThe Industry’s First Ever Free Float Style Design to Prevent any Metal to Metal Contact Between the Heatshield and Shotgun Barrel
bulletConstructed of High Strength Steel With Matte Black Powder Coating
bulletDuPont® Extreme Temperature Polymer Clip and V Blocks Secure the Heatshield to the Shotgun Preventing Sliding and Movement of the Heatshield
bulletHigh Temp Resistant Silicon Pads Protect the Shotgun Barrel Finish
bulletIncludes Aluminum CNC Machined ATI Dovetail Picatinny Rail Attachment (Rail not included)
bulletAluminum CNC Machined Ghost Ring Sights
bulletFits With or Without a Mag Extension
bulletManufactured in the USA
bulletLimited Lifetime Warranty 

Item Number   Price  
A.5.10.2481 Adv Tech Standard Halo Heatshield With Ghost Rings For 12 GA Remington 870 $50.00

 

Adv Tech SHOTFORCE STOCK WITH BUTTPAD

FITS: 12 GA.  Mossberg 500/590/835, Remington 870, Remington 870 Express,   Remington 870 Express Magnum, Winchester 1200/1300, Maverick 88 and Norinco 98

DETAIL: Collapsible, six position SHOTFORCE Buttstock with Pistol Grip and FREE Buttpad is patterned after the Colt CAR-15 style assault rifle. The buttstock is California compliant and made from Matte Black, Glass-Filled Nylon.

FEATURES: Compact carry. Stock changes length of pull from 9-1/4" to 13-1/4". Sling swivel studs. Made in USA and comes with Lifetime Warranty.

MRW4100 Shown Above
MRW4100 Shown above on fully outfitted Mossberg shotgun
MRW4100 Shown above on fully outfitted Remington shotgun
MRW4100 Shown above on fully outfitted Winchester shotgun
Item Number Price  
MRW4100 $70.00

 

Adv Tech Collapsible Stock with Pistol Grip and Forend Package

Give Your Shotgun a Personality of Its Own

bulletImproves Shooting Accuracy
bulletProvides a Stronger Grip
bulletReduces fatigue when shooting Slugs and Turkey Loads
bullet6 Position Buttstock With Pistol Grip & Buttpad
bulletStock Can Adjust Length Of Pull From 9 1/4” to 13 3/4”
bulletSling Swivel Stud
bulletIncludes Rubber Buttpad
bulletDuPont® Extreme Temperature Glass Reinforced Polymer

Every Shotgun Pistol Grip includes Mounting Hardware and Adapter Kit which allows installation to:

bulletMossberg* 500/535/590/835, 12 Gauge
bulletWinchester 1200/1300, 12 Gauge
bulletRemington 870, 12 Gauge

*The forend included in this package is only compatible to Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend.

Note: Some Minor Modification may be Required.300.

Item Number Price  
MRF6200 $87.00

 

Adv Tech Shotgun Buttstock With Pistol Grip

This full length buttstock features a slim, ergonomically designed pistol grip for maximum control and a recoil pad. Complete set of adapters and spacers allow installation on 12 GA. Mossberg 500/590/835, Maverick 88, Remington 870, Winchester 1200/1300, and Norinco 98 Series pump shotguns. Uses factory stock bolt. Pebble-grain grip area for better control. Made of black, glass-filled nylon it is virtually indestructible.

 

 

 

 

Item Number Price  
SPG0100 $43.00

 

Adv Tech REMINGTON 1100/11-87 PISTOL GRIP BUTTSTOCK

This full length buttstock features a slim, ergonomically designed pistol grip for maximum control, a recoil pad, and a sling swivel stud. Pebble-grain grip area for better control. Made of black, glass-filled nylon it is virtually indestructible. Made in the USA of Black, Glass-Filled Nylon and comes with a Lifetime Warranty. Fits Remington 1100 and 11/87 12 GA shotguns. Pistol Grip Buttstock only.

Item Number  Description Price  
SPG0200 Adv Tech Remington 1100/11-87 Pistol Grip Buttstock $47.00

 

Adv Tech Pistol Grip Buttstock and Forend

Full Length Design for Maximum Control!

bulletImproves Shooting Accuracy
bulletProvides a Stronger Grip
bulletReduces fatigue when shooting Slugs and Turkey Loads
bulletNo Jamming! Designed NOT to overlap the shotgun's receiver when cycling the pump action, thereby reducing the chance of a momentary jam by sling or clothing
bulletRubber Buttpad
bulletNon-Slip Pebble Grain Grip
bulletSling Swivel Stud
bulletEasy Installation
bulletDuPont® Extreme Temperature Glass Reinforced Polymer
Every Pistol Grip Buttstock and Forend includes Mounting Hardware and Adapter Kit which allows installation to:
bulletMossberg* 500/535/590/835, 12 Gauge
bulletRemington 870, 12 Gauge
bulletWinchester 1200/1300, 12 Gauge

*The forend included in this package is only compatible to Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend.

Item Number Price  
PGB6100 $63.00 Out Of Stock

 

Adv Tech Pistol Grip Buttstock and Forend

Full Length Design for Maximum Control!

bulletImproves Shooting Accuracy
bulletProvides a Stronger Grip
bulletReduces fatigue when shooting Slugs and Turkey Loads
bulletNo Jamming! Designed NOT to overlap the shotgun's receiver when cycling the pump action, thereby reducing the chance of a momentary jam by sling or clothing
bulletRubber Buttpad
bulletNon-Slip Pebble Grain Grip
bulletSling Swivel Stud
bulletEasy Installation
bulletDuPont® Extreme Temperature Glass Reinforced Polymer
Every Pistol Grip Buttstock and Forend includes Mounting Hardware and Adapter Kit which allows installation to:
bulletMossberg* 500/535/590/835, 12 Gauge
bulletRemington 870, 12 Gauge
bulletWinchester 1200/1300, 12 Gauge

*The forend included in this package is only compatible to Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend.

Item Number Price  
PGB6100 $63.00

 

Adv Tech 12GA Shotgun Standard Forend

No jamming! Designed NOT to overlap the shotguns receiver when cycling the pump action. Eliminates the chance of a momentary jam by a sling, clothing or other material catching between the standard forend and the receiver. Features recessed, pebble-grain, textured area which reduces the chance of hand sliding from grip. Includes adapters to fit 12 gauge and 20 GA Mossberg 500/590, Remington 870, Remington 870 Express,  Remington 870 Express Magnum, and Winchester 1200/1300 pump shotguns without gunsmithing! (Will not fit Maverick.) Made from indestructible, black, glass-filled nylon. Unconditional Lifetime Warranty. Patent Pending. No modification necessary. Manufactured by Advanced Technology, Inc. Made in the USA.

Fits Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns
Note Some Minor Modification may be Required.
*The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Magazine Tubes with a Minimum Length of 6 ¼ Inches Long for use of this Product.

Standard Shotgun Forend

Item Number Price  
SFS0400 $20.00

 

Adv Tech 12GA Shotgun Forend Pistol Grip

Ergonomically designed with a double-finger, pebble-grain, groove grip for maximum control and comfort. Made from indestructible, black, glass-filled nylon. No modification necessary. Unconditional Lifetime Warranty. Patent Pending. Manufactured by Advanced Technology, Inc Made  in the USA

Fits Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns
Note Some Minor Modification may be Required.
*The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Magazine Tubes with a Minimum Length of 6 ¼ Inches Long for use of this Product.

SFP0300 Shown above

SFP0300 shown below on weapon

Item Number Price  

SFP0300 $23.00

 

Adv Tech 12GA Shotgun Rear Pistol Grip

Designed with an ergonomic, double-finger, textured grip for maximum control and comfort. Features include an integral top-mounted sling loop and slimmer style. Includes adapters to fit 12 gauge and 20 Gauge Mossberg 500/590, Remington 870 and Winchester 1200/1300 pump shotguns without gunsmithing! Made from indestructible, black, glass-filled nylon. No modification. Unconditional Lifetime Warranty. Patent Pending. No modification. Manufactured by Advanced Technology, Inc in the USA.

Item Number Price  
SRG0200 $20.00

 

ATI 12 Ga Shotgun Pistol Grip Package

•Forend & Rear Pistol Grips and Adapters
•Sling Loop on Rear Pistol Grip?
•Non-Slip Pebble Grain Grip?
•Steel Formed Shotgun Heatshield
?Elongated Cooling Slots for Maximum Dissipation of Heat for Ultimate Protection Against Burns
?Easy Installation - Simply Slide Over Barrel and Secure with Supplied Hardware
?13-1/2" Long
•Easy Installation
•DuPont® Extreme Temperature Glass Reinforced Polymer
•Manufactured in the USA
•Limited Lifetime Warranty

Fits Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns

Note *The forend included in this package is compatible with: (1) Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend. (2) Winchester Magazine Tubes with a Minimum Length of 6 ¼ Inches are Required? for use of this Product.

Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns.

Each Heatshield should be custom fit. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm please enlist the services of your local gunsmith. ATI is not responsible for any damage caused by improper installation.

 

 

#FGR6300 (Rear Pistol Grip, Forend Pistol Grip, & Heatshield)

#FGR6300 Shown On Gun Above And Below

Item Number Price  
FRG6300 $68.00

 

ATI Remington 870 12 Ga Talon Tactical Shotgun Rear Pistol Grip

•Scorpion Recoil Pistol Grip
?Recoil Impact is Absorbed
?Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter
?Reduces the Challenge of Reacquiring the Target by Minimizing the Muzzle Lift
?Not Affected by Chemicals, Load Size or Extreme Temperatures
?Eliminates the Felt Punch of the Recoil
?Removes Limitations from Spring and Piston Type Recoil Suppression Systems
•Triton Mount System
?Constructed of Military Type III Anodized, 6061 T6 Aluminum
?Securely Fasten your ATI Tactical Stock or Rear Pistol Grip with no Specialized Tools
?Angled, Self-Aligning Dovetail Locking System for Easy, Secure Installation
?Interchangeable Single Point Sling Mount for Left and Right-Handed Shooters?
?Additional Spacer for when Sling Mounts are not in use?
?Eliminates the Need for Extra Adapters?
•Ergonomic Design
•Sure-Grip Texture
•DuPont® Extreme Temperature Glass Reinforced Polymer
•Manufactured in the USA
•Limited Lifetime Warranty

Fits: 12 GA Remington 870 Shotguns

 

A.5.10.2351

A.5.10.2351 Shown On Gun (Foregrip NOT included)

Item Number Price  
A.5.10.2351 $59.00

 

ATI Remington 20 GA Talon Tactical Shotgun Rear Pistol Grip with Scorpion Recoil Grip

•Scorpion Recoil Pistol Grip
?Recoil Impact is Absorbed
?Shooting any Load Size can now be Done with No Pain being Transferred to the Shooter
?Reduces the Challenge of Reacquiring the Target by Minimizing the Muzzle Lift
?Not Affected by Chemicals, Load Size or Extreme Temperatures
?Eliminates the Felt Punch of the Recoil
?Removes Limitations from Spring and Piston Type Recoil Suppression Systems
•Triton Mount System
?Constructed of Military Type III Anodized, 6061 T6 Aluminum
?Securely Fasten your ATI Tactical Stock or Rear Pistol Grip with no Specialized Tools
?Angled, Self-Aligning Dovetail Locking System for Easy, Secure Installation
?Interchangeable Single Point Sling Mount for Left and Right-Handed Shooters?
?Additional Spacer for when Sling Mounts are not in use?
?Eliminates the Need for Extra Adapters?
•Ergonomic Design
•Sure-Grip Texture
•DuPont® Extreme Temperature Glass Reinforced Polymer
•Manufactured in the USA
•Limited Lifetime Warranty

Fits Most 20 GA Remington 870 Shotguns

 

A.5.10.1650

A.5.10.1650 Rear Pistol Grip Shown Gun (Forend NOT included)

Item Number Price  
A.5.10.1650 $58.00

 

ATI Tactical Shotgun Forend  

Give Your Shotgun a Personality of Its Own!

bulletConstructed of Military Grade DuPont® Extreme Temperature Glass Reinforced Polymer
bulletRail locations at 90˚ Increments Around Forend
bulletPicatinny Rails Allow for Easy Installation of All Your Favorite Accessories
bulletVery Tough, Yet Extremely Lightweight
bulletTactical Shotgun Picatinny Rail Package
bulletOne Left 2" Picatinny Rail
One Right 2" Picatinny Rail
One 2" Bottom Picatinny Rail
bulletThree Blank Inserts for When Rails are Not in Use.

 

 

 

Tactical Shotgun Forend

Every Tactical Shotgun Forend includes Mounting Hardware and Adapter Kit which allows installation to:
bulletMossberg* 500/535/590/835, 12 Gauge
bulletRemington 870, 12 Gauge
bulletWinchester 1200/1300, 12 Gauge

*The forend included in this package is only compatible to Mossberg Shotguns with a removable forend, any Mossberg Shotgun newer than 2006 should be checked to insure that it has a removable forend.

Close this window

Item Number Price  
TSG0300 $29.00

 

UTG Remington 870 Shotgun Tactical Forearm

 

bulletFits RM 870 12 Ga. and Compatibles
bulletMade from Aircraft Aluminum with Matte Black Finish
bulletCompact and Solid Construction
bulletComplete with Screw Holes for Installation of UTG Tactical Rails

 

MNT-P503 Three Rail Set Sold Separately- NOT INCLUDED

 

 

 

 

 

 

 

 

Item Number Price  
MNT-HGRM87A SALE $42.00

WAS $59.00

MP Handguard Picatinny/Weaver Rails

Two 3 7/8” and one 6” long picatinny/weaver rails. Each rail with numbered slots and two - three screw holes with recess housing. Complete with 7 screws in total. Excellent quality and pricing.

Item Number Price  
MNT-P503 $13.00

 

Command Arms Remington 870 Forend With Three Rails

 Lightweight, skeletonized forend with rails. Provides three rails for mounting light, lasers and forward grips.

bulletPolymer one piece handguard for Remington 870
bulletProvides a rigid lightweight Picatinny platform
bulletComfortable, gripable design
bullet5.375” lower rail - ideal for mounting grips and other mounts
bulletTwo removable 2.25” mini side rails - ideal for mounting light/laser devices
bulletSpecial tool or wrench may be required for installation 

Part #: RR870
Fits: Rem' 870 12ga
Number of Rails: 3
Made of: Polymer

Weight (oz.): 7.36
Width Max (in.): 2.5”
Length (in.): 8”
Height (in.): 2.5”

 

Item Number Price  
RR870 $55.00

 

CAA 12 Gauge Shotgun Shell Holder 

SSM - 12 GUAGE SHOTGUN SHELL HOLDER

Shotgun shell holder mounts onto Picatinny rail reducing reload time. Provides the operator quick access to five extra shells.

bulletIdeal for use with CBS collapsible stock or Picatinny rail mount for existing collapsible stocks (PRFCS)
bulletBelt mountable using RCB1/RCB2 belt clip
bulletHigh-density polymer construction
bulletPush button release

Part #: SSM
Fits: Picatinny rail
Made of: Polymer

Weight (oz.): 1.5
Length (in.): 4.675”
Height (in.): 1.75”
Width (in.): 1.25

 

 

 

Item Number Price  
SSM $14.00

 

Command Arms Remington 870 12ga Collapsible Stock And Pistol Grip

CONTAINS: PISTOL GRIP, 6 POSTITON AR15 TUBE WITH COLLAPSIBLE BUTTSTOCK (As Pictured Right)


Improves comfort, control, and accuracy. Includes our CBS collapsible stock.

• Includes aluminum stock adaptor and aluminum AR15 6 position tube
• Accepts any AR15 collapsible stock
• Available for Remington 870 12 ga. and similar shotguns
• 6 interchangeable finger grooves and palm swells on pistol grip provide strong grip

Part #: RS870
Fits: Rem' 870 12 ga
Made of: Polymer

Weight (oz.): 7.4
Length (in.): 7.95”
Height (in.): 6.86”
Width (in.): 2.63”

Item Number Description Price  
RS870B Command Arms Remington 870 12ga Collapsible Stock & Pistol Grip - Black $167.00

*

Choate Remington 1100 Forend w/Picatinny

Choate introduces its new line of Picatinny rail forends. If you are looking for a less expensive solution to making your shotgun a tactical entry or home defense weapon, then we have the forend for you. Our forend kit includes a forend with pre-drilled holes and a 1-1/2 inch piece of picatinny rail. To attach our rail at 3-6-9 o'clock position, you simply use a Phillips head screwdriver and screw in 4 screws (provided). It accepts all tactical light mounts that fit on 1913 picatinny style rails. This includes Surefire, Streamlight, Pelican, Pentagon and Glock lights.

 

Made In The USA

 

Order NOW!

Item Number Price  
01-02-23 $48.00

*

Choate Remington 1100/1187 Forend
Will fit the 1100 and the 11-87 12ga. shotguns. Choate Synthetic Forends go great with our pistol grips and conventional stocks. Made of fiberglass filled plastic, they look good and will last a lifetime.

Made In The USA

Order NOW!

Item Number Price  
01-02-12 $34.00

*

*

Choate Remington 870 Forend w/Picatinny
Choate introduces its new line of Picatinny rail forends. If you are looking for a less expensive solution to making your shotgun a tactical entry or home defense weapon, then we have the forend for you. Our forend kit includes a forend with pre-drilled holes and a 1-1/2 inch piece of picatinny rail. To attach our rail at 3-6-9 o'clock position, you simply use a Phillips head screwdriver and screw in 4 screws (provided). It accepts all tactical light mounts that fit on 1913 picatinny style rails. This includes Surefire, Streamlight, Pelican, Pentagon and Glock lights.

 

 

 

 

Made In The USA

Order NOW!

Item Number Price  
01-02-22 $33.00

*

Choate Remington 870 Forend

870 forend

Fits Remington Wingmaster and Express mod. 870 shotguns in 2 3/4 and 3 inch. Choate Synthetic Forends go great with all our stock. Made of fiberglass filled plastic, they look good and will last a lifetime.

Made In The USA

Order NOW!

Item Number Price  
01-02-02 $20.00

*

Choate Remington 870 lt. wt. Forend 20 Gauge

This forend fits Remington Wingmaster and Express lightweight 20ga. 870 shotguns. Choate Synthetic Forends go great with all our stock. Made of fiberglass filled plastic, they look good and will last a lifetime. Some of the early 20ga Remington 870 shotguns were made on the 12ga frame so parts for the lightweight 20ga 870 will not fit. To determine if you gun is built on the 12ga frame remove your magazine cap and see if a 12ga shell will fit into your magazine tube. If the rim of the 12ga shell will not fit then your 870 is built on the lightweight frame, if it does fit your 870 is built on the 12ga frame. If your shotgun is built on the 12ga receiver then you will need parts to for the 12ga 870.

Made In The USA

Order NOW!

Item Number Price  
01-02-14 $20.00

*

Choate Remington 870 Conventional Stock

Choate Machine & Tool's MK5 Conventional Stock features our new spacer system which was originally designed for the police for use with body armor; however, they work great for the hunter and recreational shooter as well. These stocks have our innovative spacer system and come with two 1/2" spacers included which adjusts the length of pull from 13" to 14".You can lengthen your stock by simply adding new spacers and longer screws. Our stocks are made of the finest materials available and carry our lifetime warranty.

Made In The USA

Order NOW!

Item Number Price  
01-01-44 $66.00

*

Choate Remington 870 Lightweight 20g Conventional Stock

Choate Machine & Tool's MK5 Conventional Stock features our new spacer system which was originally designed for the police for use with the body armor; however, they work great for the hunter and recreational shooter as well. These stocks have our innovative spacer system and come with two 1/2" spacers included which adjusts the length of pull from 13" to 14".You can lengthen your stock by simply adding new spacers and longer screws. Our stocks are made of the finest materials available and carry our lifetime warranty. Some of the early 20ga Remington 870 shotguns were made on the 12ga frame so parts for the lightweight 20ga 870 will not fit. To determine if you gun is built on the 12ga frame remove your magazine cap and see if a 12ga shell will fit into your magazine tube. If the rim of the 12ga shell will not fit then your 870 is built on the lightweight frame, if it does fit your 870 is built on the 12ga frame. If your shotgun is built on the 12ga receiver then you will need parts to for the 12ga 870.

Made In The USA

Order NOW!

Item Number Price  
01-01-48 $66.00

*

Choate Remington 1100/1187 Conventional Stock

Fits the 12 ga Remington 1100/ 11-87. The MK5 Conventional Stock features our spacer system which come with one 1/2 spacers and one 1/4 spacer included which adjusts the length of pull from 13 1/2" to 13 3/4" . You can lengthen your stock by simply adding new spacers and longer screws. NOTE- The 1100 and 11-87 shotguns can not be shortened shorter than 13 1/2 inches because of the recoil spring tube that protrudes form the back of the receiver.

Made In The USA

Order NOW!

Item Number Price  
01-01-52 $66.00

 

*

Choate Remington 870 MK5 Pistol Grip Stock

The Mark 5 stock reduces felt recoil and muzzle climb to make follow-up shots faster and more accurate. Single-handed firing is also be made much easier. The stock is made of tough fiberglass filled plastic and comes with a soft 1" rubber recoil pad and a quick detach swivel stud. These stocks have our innovative spacer system and come with two 1/2" spacers included which adjusts the length of pull from 13" to 14". Extra spacers can be purchased in 1/4, 1/2 and 3/4 inch lengths.

Made In The USA

 

Item Number Price  
01-01-42 $76.00

*

Choate Remington 870/1100/1187 FN Style Pistol Grip Stock

Remington 870/1100/1187 FN Style Pistol Grip Stock. This is our original pistol grip stock for the Remington guns.

 

 

Made in The USA

Item Number Price  
01-01-02 $77.00

*

Choate Remington 870 20ga Lightweight Pistol Grip Stock

Fits the 20 ga 870, pump action rifles and semi auto rifles. This stock reduces felt recoil and muzzle climb to make follow-up shots faster and more accurate. Single-handed firing is also made much easier. The stock is made of tough fiberglass filled plastic and comes with a 1" rubber recoil pad and a quick detach swivel stud. These stocks have our innovative spacer system and come with two 1/2" spacers included which adjusts the length of pull from 13" to 14". Some of the early 20ga Remington 870 shotguns were made on the 12ga frame so parts for the lightweight 20ga 870 will not fit. To determine if you gun is built on the 12ga frame remove your magazine cap and see if a 12ga shell will fit into your magazine tube. If the rim of the 12ga shell will not fit then your 870 is built on the lightweight frame, if it does fit your 870 is built on the 12ga frame. If your shotgun is built on the 12ga receiver then you will need parts to for the 12ga 870.

Made In The USA

Item Number Price  
01-01-50 $76.00

*

Choate Remington 870 Pistol Grip Youth Body Armor Stock

Youth Stock

Fits the 12 ga 870 shotguns. Mark 5 youth and body armor pistol grip stock has a shortened length of pull of 11 3/4 inches. Stock comes with a 1/4 inch solid butt plate. This stock has no spacers. You can order a special recoil pad and spacers that will fit.

Made In The USA

Order NOW!

Item Number Price  
01-01-46 $76.00

*

Choate Remington Lightweight 870 20 ga Pistol Grip Youth Body Armor Stock

Youth Stock

Fits the Remington 870 20 ga shotguns and Remington pump action and semi auto rifles. The Mark 5 Y&BA stock has a shortened length of pull of 11 3/4 inches. We made this stock for shorter stature shooters and people wearing body armor. Stock comes with a 1/4 inch solid butt plate. This stock has no spacers. You can special order a one inch rubber recoil pad and spacers that will fit this stock. Some of the early 20ga Remington 870 shotguns were made on the 12ga frame so parts for the lightweight 20ga 870 will not fit. To determine if you gun is built on the 12ga frame remove your magazine cap and see if a 12ga shell will fit into your magazine tube. If the rim of the 12ga shell will not fit then your 870 is built on the lightweight frame, if it does fit your 870 is built on the 12ga frame. If your shotgun is built on the 12ga receiver then you will need parts to for the 12ga 870.

Made In The USA

Order NOW!

Item Number Price  
01-01-38 $76.00

*

Choate Remington 870 Conventional Youth Body Armor Stock

Youth Stock

The Mark 5 conventional stock has an 11 3/4 inch length of pull, it comes with a 1/4 inch solid butt plate. We made this stock for shorter stature shooters and people wearing body armor. This stock has no spacers. You can special order a one inch rubber recoil pad and spacers that will fit this stock.

Made In The USA

Item Number Price  
01-01-36 $66.00

*

Choate Remington Lightweight 870 Conventional Youth Body Armor Stock

Youth Stock

Fits the 20 ga 870, pump action rifles and semi-auto rifle. The Mark 5 conventional stock has an 11 3/4 inch length of pull, it comes with a 1/4 inch solid butt plate. We made this stock for shorter stature shooters and people wearing body armor. This stock has no spacers. You can special order a one inch rubber recoil pad and spacers that will fit this stock. Some of the early 20ga Remington 870 shotguns were made on the 12ga frame so parts for the lightweight 20ga 870 will not fit. To determine if you gun is built on the 12ga frame remove your magazine cap and see if a 12ga shell will fit into your magazine tube. If the rim of the 12ga shell will not fit then your 870 is built on the lightweight frame, if it does fit your 870 is built on the 12ga frame. If your shotgun is built on the 12ga receiver then you will need parts to for the 12ga 870.

Made In The USA

Item Number Price  
01-01-40 $66.00

*

Choate 870 Conventional Skeletonize Stock

Our original old style conventional stocks with the durability of a composite stock

 

Made In The USA

Order NOW!

Item Number Price  
01-01-04 $66.00

*

Choate M4 Telescoping/Side Folding Stock Remington 870 12 Gauge

The side folding 870 stock lets you have a compact shotgun for easy storage and the option of adjustable length of pull. The folding housing, hinge and hinge pin are made of steel. The telescoping stock is our M4 stock with heavy duty tube designed to take the recoil of 3 1/2 inch 12 ga. Length of pull is from 14 to 17 inches.

 

 

 

 

Item Number Price  
01-01-61 $185.00

*

Choate M4 Telescoping/ Folding Stock Remington Lightweight 870 and Pump Rifles

This side folding stock fits the 870 20 ga and the pump action rifles like the 7615. It lets you have a compact shotgun/rifle for easy storage and the option of adjustable length of pull. The folding housing, hinge and hinge pin are made of steel. The telescoping stock is our M4 stock with heavy duty tube designed to take the recoil of 3 1/2 inch 12 ga. Length of pull is from 13 3/4 to 16 3/4 inches. Some of the early 20ga Remington 870 shotguns were made on the 12ga frame so parts for the lightweight 20ga 870 will not fit. To determine if you gun is built on the 12ga frame remove your magazine cap and see if a 12ga shell will fit into your magazine tube. If the rim of the 12ga shell will not fit then your 870 is built on the lightweight frame, if it does fit your 870 is built on the 12ga frame. If your shotgun is built on the 12ga receiver then you will need parts to for the 12ga 870.

Item Number Price  
01-01-60 $185.00

*

Choate Remington 870 Top Folder Stock

Our top folding stocks make an excellent compact package. These stocks are made of solid cast steel with plastic over molded around it. This stock is operated with a simple push of a thumb button to lock it in either the open or closed position. This stock fits shotguns with rifle sights and ventilated rib barrels. Will not fit shotguns with Ghost Ring style sights. Fits 2 3/4, 3 and 3 1/2 inch guns.

Made In The USA

Order NOW!

Item Number Price  
01-01-12 $105.00

*

Choate Remington 870 Side Folder

Our side folding shotgun stocks must be used with our minimum length forend, which is included with the folder kit. The folders are made of 4140 steel and fiberglass filled plastic.They come with a 3/4" recoil pad and sling loops.

Made In The USA

Order NOW!

Item Number Price  
01-01-22 $94.00

*

Choate Remington 870 Side Folding Stock for 20 ga. Lightweight

Fits the lightweight frame 870 shotguns. Our side folding shotgun stocks must be used with our minimum length forend, which is included with the folder kit. The folders are made of 4140 steel and fiberglass filled plastic. They come with a 3/4" recoil pad and sling loops.

Made In The USA

Item Number Price  
01-01-23 $95.00

*

Choate Remington 12ga 870 Telescoping Folder Housing Only (No M4 Stock, Tube, or Castle Nut)

If you want a side folding M4 Telescoping stock for your Rem 870 12 ga and want to use another manufactures telescoping stock this it your answer. You get the pistol grip and side folding housing, just add your own telescoping M4 stock, tube, & castle nut!!!

 

 

 

 

Made In The USA

Item Number Price  
01-09-11 $100.00

*

Choate Remington 870 Telescoping Stock 12ga

Telescoping stock for Remington 870. The telescoping stock is our M4 stock with heavy duty tube designed to take the recoil of 3 1/2 inch 12 ga. Length of pull is from 11 1/2 to 15 inches. The stock has 6 different places for sling attachment, including a flush cup for push button QD sling mounts.

 

Made In The USA

 

Item Number Price  
01-01-08 $120.00

*

Chaote Remington 20ga & Rifle Folder Only- No M4 Stock, Tube, or Castle Nut

This is our economical answer to those who want a side folding M4 Telescoping stock for their Rem 870 20 ga orRem 742/7400/7600/7615 rifles. You get the pistol grip and side folding housing, just add your own telescoping M4 stock, tube, & castle nut!!!

 

 

 

 

Made In The USA

Item Number Price  
01-09-12 $103.00

 

*

Choate Remington 870 Pistol Grip Forend
Forend Only

There are several advantages to having a Pistol Grip Forend. By holding the gun in a more natural position, it is easier to control and aim. It also protects the shooter's hand from slipping off the forend during rapid fire. These pistol grip forends are constructed of fiberglass reinforced polymer and will give a lifetime of shooting performance.

Made In The USA

 

Order NOW!

01-02-04 Pistol Grip Forend

01-02-04 Shown on Gun with 01-03-02 Pistol Grip (Sold Separately)

Item Number Price  
01-02-04 $34.00

*

Choate Remington 870 Pistol Grip

Fits the Wingmaster and Express Mod.870 shotguns. Makes the shotgun easier to conceal and maneuver in tight places. Angle and shape of grip gives the shotgun good control while firing.

Made In The USA

Order NOW!

01-03-02 Pistol Grip

01-03-02 Pistol Grip Shown On Gun With 01-02-04 Pistol Grip Forend (Sold Separately)

Item Number Price  
01-03-02 $26.00

*

Choate Remington 870 Mark 6 Stock

Made In The USA

Item Number Price  
01-01-18 $82.00

 

*

Choate Remington 870 Mark 6 Stock

Our Mark 6 stock has will hold (5)five rounds in the bottom uses our adjustable length of pull spacer system and has a soft one inch thick recoil pad. It will take 2 3/4 to 3 1/2 inch 12 ga. shells, you can adjust how hard it is to remove the shells by tightening the adjustment screws on the side of the shell holder. 

Shells Not Included

Made In The USA

Order NOW!

Item Number Price  
01-01-14 $81.00

*

Choate Rem 870 Orange MK 6 Stock and Forend

Orange Mk 6 stock and forend

These stocks are made of the same fiber filled polypropylene as all of our black stocks. The die has been changed in order to achieve the Olive Drab Green and the Less than Lethal Orange coloring. The bright Orange of our less than lethal firearm stock gives quick recognition for police officers. The Mark 6 was actually designed for Less than Lethal shot.

Made In The USA

Order NOW!

 The shell holder in the butt stock allows the user to see what type of shell he is choosing before removing the shell from the shell carrier. This saves time and helps to insure proper use of different shot shells. When fully loaded the Mark 6 stock carries 5 extra shells. The shell carriers can be individually adjusted to ensure a tight hold on the shot shell and accommodates all 12 gauge shells from 2-3/4" to 3-1/2" inches in length.

Item Number Price  
01-01-16 $100.00

*

Choate MK5 Orange Remington Pistol Grip Stock and Forend

These stocks are made of the same fiber filled polypropylene as all of our black stocks. The bright Orange of our less than lethal firearm stock gives quick recognition for police officers. Mark 5 stock use the adjustable length of pull spacer system.

Made In The USA

Order NOW!

Item Number Price  
01-01-17 $95.00

*

Choate MK5 Green Remington Pistol Grip Stock and Forend

The Mark 5 stock reduces felt recoil and muzzle climb to make follow-up shots faster and more accurate. Single-handed firing is also made much easier. The stock is made of tough fiberglass filled plastic and comes with a 1" rubber recoil pad and a quick detach swivel stud. These stocks have our innovative spacer system and come with two 1/2" spacers included which adjusts the length of pull from 13" to 14". Extra spacers can be purchased in 1/4, 1/2 and 3/4 inch lengths.

Made In The USA

Item Number Price  
01-01-19 $95.00

*

Choate Remington 1100/1187 Mark 5 Pistol Grip Stock

Stock only- No forend

 

The Mark 5 stock reduces felt recoil and muzzle climb to make follow-up shots faster and more accurate. Single-handed firing is also be made much easier. The stock is made of tough fiberglass filled plastic and comes with a soft 1" rubber recoil pad and a quick detach swivel stud. These stocks have our innovative spacer system and come with two 1/2" spacers included which adjusts the length of pull from 13" to 14". Extra spacers can be purchased in 1/4, 1/2 and 3/4 inch lengths.

Made In The USA

Order NOW!

Item Number Price  
01-01-34 $76.00

*

Choate Remington Butt Pad Old Style

Remington Butt Pad to fit our older original pistol grip Remington Stocks.

 

Made in the USA

 

 

 

 

 

 

 

Item Number Price  
01-10-12 $11.00

*

 Choate QD Rem 870/1100 Ambi Sling Mount

Quick detachable Ambidextrous Sling Mount for the Remington 870/1100/1187. Made from 6061 aluminum. Sling loops are made of stainless steel and anodized black.

 

 

 

Made In The USA

Item Number Price  
01-09-01 $39.00

 

GG&G Remington 870/1100/1187  Rear Sling Adaptor


Because the Remington Rear Sling Plate is mounted just behind the receiver, it can be used in a dual point sling set up or as a single point sling attachment. Although originally designed for the Remington 870, it will also fit the Remington 1100 and 1187 shotguns.

Single point tactical slings attached to shoulder-mounted combat weapons including shotguns such as the Remington 870 are very popular in both military and law enforcement special operations circles. These shotgun sling mount systems permit the operator to mount the weapon on either the primary or offside shoulder. As a result, during dynamic entries it becomes easier to "cut the pie" at doorways and move around corners, whether they are on the right side or left side, without telegraphing the operator's position. In addition, slings attached to a single point mount work especially well when operators are deployed wearing body armor or are involved in breeching operations. The preferred mounting point for slings of this type is directly behind the receiver and in front of the buttstock.

GG&G was one of the first to introduce a Single Point Rear Sling Attachment for the Remington Model 870 combat shotguns. Precision machined from 7075 aircraft grade billet aluminum alloy and Type III hard anodized matte black, this shotgun sling attachment has been designed for the rigors associated with professional use. This GG&G Single Point Rear Sling Attachment will accommodate slings up to 1 1/4" in width and can easily be installed by the operator.

Made In the USA

Item Number Price  
GGG1129 $29.00

 

GG&G Remington 870/1100/1187 Looped Rear Sling Attachment

Can be used in conventional dual point sling setups as well as single point sling set ups. The Remington Rear Sling Attachment will also fit the Remington 1100 and 1187 shotguns. For federal and military purchases the NSN number is NSN 1005-01-527-6333

Single point slings using HK Style snap hooks or mash hooks attached to shotguns such as the Remngton 870, are very popular in military and law enforcement special operations circles. Because of the lack of an alternative method, most shooters have just clipped their single point sling with a snap hook into a standard sling swivel. Although this works, it is noisy and provides a loose and sloppy sling attachment.

The Remington 870 Looped Rear Sling Attachment is the best alternative to clipping into the standard sling swivel or rear sling plate. Precision machined from 7075 aircraft grade solid billet aluminum alloy and Type III hard anodized matte black per mil-spec, it has been designed to withstand tough professional use. All edges have been de-horned and softened for your safety and to protect your equipment. The Remington 870 Looped Rear Sling Attachment can easily be installed by the operator.

Made In the USA

 

Item Number Price  
GGG1283 $29.00

*

Choate Shell Follower For 20 ga. Remington 870/1100/1187

Avoid spring failure by using one of our High Visibility Shell Followers. It will protect your spring and you will be able to tell from a glance if your gun is loaded or not with the Hunter Orange Color of the follower.

 

 

Made In The USA

Item Number Price  
01-05-03 $5.00

*

Choate Remington 870/1100/1187 Shell Follower

Avoid spring failure by using one of our High Visibility Shell Followers. It will protect your spring and you will be able to tell from a glance if your gun is loaded or not with the Hunter Orange Color of the follower.

Made In The USA

Order NOW!

Item Number Price  
01-05-02 $6.00

*

Choate Combat Bolt Handle 1100/1187

This bolt handle was designed to replace standard Remington semi-automatic bolt handles. They are made of heat treated steel, treated to a hardness of 54 Rockwell. The combat bolt handle allows you to quickly manipulate the bolt of your semi-auto shotgun regardless of firing position. No gunsmith required. Simply pull out your old bolt handle and push in the new one.

Made In The USA

Order NOW!

Item Number Price  
01-10-02 $11.00

 

Choate Remington/Winchester Sling Swivel Base Clamp 1 Inch

These clamps come standard on most of our extensions. Gives a sling attachment point to the front of you shotgun and adds support to magazine extensions. Fits most Remington, Mossberg, Benelli and Winchester shotguns. This part is blued finish.

Made In The USA

Item Number Price  
55-08-01 $10.00
 
Choate Magazine Extension Sling Swivel Base Clamp 1 inch Matt finish

These clamps come standard on most of our extensions. Gives you an attachment point for a sling on the front of you shotgun and adds support to magazine extensions. Fits most Remington, Mossberg, Benelli and Winchester shotguns. This part is Sandblasted Matt finish.

 

Item Number Price  
55-08-02 $10.00

 

Choate Remington/Winchester Sling Swivel Base Clamp Parkerized 1 Inch

Add strength to magazine extensions. These clamps come standard on all 9 & 10 shot extensions and are recommended for 7 & 8 shot extensions

Item Number Price  
55-08-02 $10.00

 

Choate Remington/Winchester Sling Swivel Base Clamp Blued 1 Inch

Add strength to magazine extensions. These clamps come standard on all 9 & 10 shot extensions and are recommended for 7 & 8 shot extensions

Item Number Price  
55-08-01 $12.00

 

Choate Light Weight Base Clamp  Remington 20 gauge 1 Inch

Add strength to magazine extensions. These clamps come standard on all 9 & 10 shot extensions and are recommended for 7 & 8 shot extensions.

Made In The USA

Item Number Price  
55-08-07 $10.00
 

 

 

Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

 

 

Can't find what you are looking for???  Contact Us  with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes. 

  2014, The Country Shed

RESTRICTED ITEMS   Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed  does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws.  You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area.  Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle,  Handgun, Pistol, Assualt  Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers,  UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate,  MAKO,  Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!