|
SKS & AK-47 Rifle
Accessories
Great Accessories Available
for the SKS Rifle and AK-47 Including Stripper Clips, Stripper Guides, SKS Rifle
Manuals, MAK-90 Instruction Manual, Front
Sight Elevation and Windage Tools, and Bipods.
| SKS 10 Shot
Stripper Clips
Holds Ten Rounds 7.62 X 39 For Easy Loading of the SKS Rifle
Also Works Great With AK-47 Mag Loader for Quick Loading of 20, 30 and 40
Round AK Mags
All Metal Construction
Ammo Not Included
Great For Storing, Carrying, and Loading Ammo!! |
 |
| Item
Number |
Description |
Price |
|
| SKSSTRIP20PACK |
SKS 10 Round Strippers Clip 20 Pack |
$6.50 |
|
| SKSSTRIP100PACK |
SKS 10 Round Stripper Clip 100
Pack |
$30.00 |
|
| SKSSTRIP500PACK |
SKS 10 Round Stripper Clip 500
Pack |
$135.00 |
|
| AK Mag Stripper Guide
Works on 20, 30 and 40 Round AK-47 Mags
Does NOT work on SKS mags
Uses 10 Round SKS Stripper Clips To Easily and
Quickly Load AK-47 Magazines.
Magazine, ammo, & Stripper Clip NOT Included
|

|
 |
| Item Number |
Price |
|
| AKSTRIPGUIDE |
$6.00 |
|
AK-47
Mag Covers
 | Protects mag feed lips
and ammo from dirt, dust or moisture
 | Black & Flexible |
|
FITS: 7.62
x 39 AK-47 Magazines
Set Of Four Covers
Mag pictured not included
|

|

|
| Item Number |
Price
|
|
| MAK0762 |
$7.00 |
|
Command
Arms AK-47 Mag Coupler
Joins two magazines for the AK-47 rifle, providing greater ammunition availability
Comes with two couplers
|

|
| Item Number |
Price |
|
| AK47MC |
$12.00 |
|
| Choate
AK47 Clip Connector
Now you can increase your fire power 100% with Choate's Magazine Clip
Connectors. Constructed of two steel plates on front and back and a
plastic filler blocks in the center. This superior design has several
advantages. Both clips point upward. This enables the shooter to use a
bipod in a prone position without damaging the feed lips or getting dirt
in the magazine.To load the second clip, just move the first clip over
1" and reinsert. Clips not included. |

|
| Item
Number |
Price |
|
| 51-08-06 |
$27.00 |
|
| SKS
Scope Shield
Constructed of steel, the TAPCO SKS Scope
Shield is built for years of shooting. Its universal design allows our
deflector to interface with most receiver scope mounts on the market,
including the Tri Rail Receiver Cover Mount. Once properly installed, it
prevents damage to optics and loss of weapon’s zero by deflecting spent
cartridge casings. Marked TAPCO USA.
For Use On MNT-640T5 and MNT-640TRIII |

|
MNT-6608 Shown On MNT-640T5 |
MNT-668 Shown On MNT-640TRIII With Scope |
| Item
Number |
Price |
|
| MNT-6608 |
$10.00 |
|
| UTG
SKS
Scope Shield
• Add-on Accessory to Deflect Flying Shells and to Prevent them from
Hitting People and Objects
• Fits SKS Style Rifles
• Compatible with SKS Tri-Rails and Hi-Pro Mounts
• Matte Black Finish
For Use On MNT-640T5 and MNT-640TRIII
|

|
 |
| Item
Number |
Price |
|
| TL-SDSK01 |
$10.00 |
|
AK
/ SKS Shell Deflector
|

|
| Item
Number |
Price |
|
| PJ008 |
$7.00 |
|
|
E&L
AKM/AK-47/AKS/VALMET 76/MAK 90/NHM 90 Brass Catcher
Save your brass
for reloading. Our Brass Catchers are uniquely designed to conform to the
shape of the firearm. Snaps on and off instantly and are made from strong,
light weight, black textured plastic. Each holds a minimum of 60 rounds except
(Item #123 - Colt .45, 1911 Frame holds 20 rounds, Item #131 holds 100 links
and rounds, Item #138 - M3/M3A1 Grease Gun holds 25 rounds and Item #135, 136
& 137 Shotgun Catchers hold a maximum of 5 rounds). Brass Catchers
will not interfere with any moving parts on the firearm. RIGID BRASS CATCHERS
are a pleasant way to save time, money and will also increase the safety
factor for the left-handed shooter. Save your brass
for reloading .
|

Made in the U.S.A.
Unconditional Lifetime Guarantee
In use by the U.S. Military, Prison System and Police Departments around the
world. |
| Item
Number |
Price |
|
| 117 |
$37.00 |
|
|
E&L
SKS Brass Catcher
Save your brass
for reloading. Our Brass Catchers are uniquely designed to conform to the
shape of the firearm. Snaps on and off instantly and are made from strong,
light weight, black textured plastic. Each holds a minimum of 60 rounds except
(Item #123 - Colt .45, 1911 Frame holds 20 rounds, Item #131 holds 100 links
and rounds, Item #138 - M3/M3A1 Grease Gun holds 25 rounds and Item #135, 136
& 137 Shotgun Catchers hold a maximum of 5 rounds). Brass Catchers
will not interfere with any moving parts on the firearm. RIGID BRASS CATCHERS
are a pleasant way to save time, money and will also increase the safety
factor for the left-handed shooter. Save your brass
for reloading.
|

Made in the U.S.A.
Unconditional Lifetime Guarantee
In use by the U.S. Military, Prison System and Police Departments around the
world. |
| Item
Number |
Price |
|
| 128 |
$37.00 |
|
E&L
AK-47 ADJUSTABLE STOCK EXTENSION
(For Solid
Stocks Only)
Additional Length (in inches ):
1.75" 2.25" 2.75"
The E&L
Stock Extensions are ADJUSTABLE in 1/2" increments to enable you to
achieve the proper length of trigger pull. These extensions are
manufactured using high-impact, glass-filled black nylon. Each stock
extension is adjustable to three lengths. Our Small Recoil Pad Order# 550
will fit these Stock Extensions. |
 |
| Item
Number |
Description |
Price |
|
| 502 |
E&L
AK-47 ADJUSTABLE STOCK EXTENSION |
$30.00 |
|
| E&L
AK-47 CHEEK REST
The E&L
Cheek Rests are designed to give the proper eye alignment when using a
scope-mounted rifle. Manufactured with high-impact, glass-filled
black nylon, these cheek rests weigh only 3 ounces each.
Designed
for use only with the E&L Adjustable Stock Extension on solid stocks
only.
|
 |
| Item
Number |
Description |
Price |
|
| 527 |
E&L
AK-47 CHEEK REST |
$20.00 |
|
E&L
SKS ADJUSTABLE STOCK EXTENSION
(For Solid
Stocks Only)
Additional Length (in inches ) :
2.25" 2.75" 3.25"
The E&L
Stock Extensions are ADJUSTABLE in 1/2" increments to enable you to
achieve the proper length of trigger pull. These extensions are
manufactured using high-impact, glass-filled black nylon. Each stock
extension is adjustable to three lengths. Our Small Recoil Pad Order# 550
will fit these Stock Extensions. |
 |
| Item
Number |
Description |
Price |
|
| 503 |
E&L
SKS ADJUSTABLE STOCK EXTENSION |
$30.00 |
|
| 7.62x39
Laser Boresighter (SKS, AK-47, ect.)
Laser Boresighter for 7.62x39
The laser boresight that is always with you. Light-weight carry pouch and
laser make it convenient to take with you on the hunt. Eliminates the need
to waste ammo and range time. Simply insert the batteries, close the end
cap, insert into the chamber and sight the firearm.
Brass body
Batteries included
Laser wavelength is 632-650nm
Power < 5mW
Range up to 100 yards in total darkness
2" dot size at 100 yards
|

|
| Item
Number |
Description |
Price |
|
| 762X39BORESIGHTER |
Laser Boresighter for 7.62x39 |
$40.00 |
|
| Item
Number |
Description |
Price |
|
| NEW!!
AK100S |
Tech-Sights AK-47 Rifle Sighting
System Windage adjustable w/dual flip aperture and cover. For all AK47s
except Yugoslavian Model. |
$110.00 |
|
| NEW!!
AK100Y |
Tech-Sights AK-47 Rifle Sighting
System Windage adjustable w/dual flip aperture and cover. For
Yugoslavian AK47 Models |
$110.00 |
|
| NEW!!
AK200S |
Tech-Sights AK-47 Rifle Sighting
System Windage & elevation adjustable w/single aperture and cover.
For all AK47s except Yugoslavian Model. |
$125.00 |
|
| NEW!!
AK200Y |
Tech-Sights AK-47 Rifle Sighting
System Windage & elevation adjustable w/single aperture and cover. For
Yugoslavian AK47 Models. |
$125.00 |
|
|
OPTIONAL
PARTS NEEDED
FOR TELESCOPING TUBE AND ROD TYPE RECOIL ASSEMBLIES.
TS00208
Retaining Collar
-
This part is only needed as a replacement part or additional part for AK
rifles with the telescoping tube and rod type recoil assemblies.
|

|
| TS0028 |
Tech-Sights Retaining Collar |
$6.00 |
|
TS00209
Moveable Guide Rod-
This part is only needed as a replacement part or additional part for AK
rifles with the telescoping tube and rod type recoil assemblies.
|

|
| TS00209 |
Tech-Sights Movable Guide Rod |
$5.00 |
|
| TS00212Recoil
Spring
-
This part is only needed as a replacement part for the AK rifle
|

|
| TS00212 |
Tech-Sights Recoil Spring |
$7.00 |
|
MAKO
AK-Rod No Fire Safety Rod for AK47
The safest solution for training & storage
Features:
• Designed to fit 7.62mm rifles.
• Perfect solution for safe training and gun storage.
• Securely blocks the barrel by preventing a live round being
inadvertently chambered.
• Bright colours for better visibility.
• Ideal for weapon safety and accident prevention. |

|
| Item Number |
Price |
|
| AK-ROD 47 |
$4.00 |
|
| AK-47
Three Mag Pouch (Holds 3 Mags)
Holds 3 AK-47 20 Round Mags
Good Condition
Mags NOT Included |
| Item
Number |
Price |
|
| POUAK20ROUND |
$9.00 |
|
| AK-47
Four Mag Pouch
Hold 4 AK-47 40 Round Mags
New
Mags NOT Included |
| Item
Number |
Description |
Price |
|
| POUAKA07-ODG |
AK-47 4 Mag Pouch For 40 Round
Mags- OD Green- Good Condition |
$9.00 |
|
| POUAKA07 |
AK-47 4 Mag Pouch For 40 Round
Mags- Teardrop- New |
$9.00 |
|
| East German
AK-47 Drum Pouch
East German Drum Pouch that holds Romanian
75rd Drums.
Drum not included.
|

|
| Item
Number |
Price |
|
| DRUMPOUCH |
$7.00 |
|
Tri-Rail Barrel
2 Slot Mount For AK-47, SKS, Mini-14 or any Rifle with Barrel Size 3
–20 mm (0.51 Inch to 0.787 Inch)
Universal Tri-Rail Barrel Mount Complete with Laser Clamping
Feature - Each Rail with 2 Slots
Fits
Rifle Barrel From 13 –20 mm (.512”-.787”)
|
|
| Item Number |
Price |
|
| MNT-BR002 |
$20.00 |
|
UTG
Universal
Single-Rail Barrel Mount NEW!!
UTG Universal Single-Rail Barrel Mount
Length: 1.2” (2 slots)
Compatible Firearm Barrel Range: .51”-.78”
|

|
 |
| Item
Number |
Price |
|
| NEW!!
MNT-BR002S |
$8.00 |
|
Deluxe
Tri-Rail Barrel Deluxe
Tri-Rail Barrel 5
Slot Mount For
AK-47, SKS, Mini-14 or any Rifle with Barrel Size 3
–20 mm (0.51 Inch to 0.787 Inch)
Universal Tri-Rail Barrel Mount Complete with Laser Clamping
Feature - Each Rail with 5 Slots
Fits
Rifle Barrel From 13 –20 mm (.512”-.787”)
|
 |
 |
 |
| MNT-BR005
Shown Above on AK-47 and SKS with lasers, flashlights, and grips. |
MNT-BR005
Shown Above on Mini-14 and HK with lasers and flashlights. |
| Item Number |
Price |
|
| MNT-BR005 |
$27.00 |
|
UTG
Universal Single-Rail Barrel Mount
UTG Universal Single-Rail Barrel Mount
Length: 2.4” (5 slots)
Compatible Firearm Barrel Range: .51”-.78” |

|
Shown Above on gun With Laser and Flashlight (Not Included) |
| Item
Number |
Price |
|
| MNT-BR005S |
$10.00 |
|
| SKS
SOCOM Universal Picatinny Tri-Rail System Mount
to fit Standard/Oversized Barrel and Gas Tube
Gen 2
Newly
Upgraded
from
MNT-HG568SA
with
a Universal
Design
to
Fit
all
Model
SKS
and
Variants
with
Standard/Oversized
Barrel
and
Gas
Tube.
(MNT-HG568SB)
- Precision Machined with Maximum Strength
- Well Designed Handguard
Tri-rails with Extended Length
(9" Long) to Cover the Entire
Gas Tube to the Rear Sight Area
- Three Mil-spec Picatinny Rails with Plenty of Slots, 21 Slots on
Each Side and 22 Slots on Top for Versatile Accessory Applications
- Top Rail Center V-cut
Allows Iron Sight Use
- Clever Rail System Locking Design Includes Lower Bottom Base Mating
with Top Piece for Most Solid and Secure Fit
- Simple and Friendly Installation, no Gunsmith or Tool Required
- Do Not Need to Remove Original Handguard
- Great Zero-retention Capability for all Accessories Installed on the
Rails
- Intensively Tested by Field Experts Under Extreme Heat and Sub-zero
Temperature and Demonstrates Most Satisfactory Performance
- Ultimate Tactical Solution to Enhance Accuracy Under Toughest
Environments
- Universal Design Fits Model SKS and Variants with Standard/Oversized
Barrel
and Gas Tube
- Hard Anodized Finish for Wear Resistance
- UTG Rubber Rail Guards Included for Great Comfort and Protection
|


|
|
 
|
| Item
Number |
Price |
|
| MNT-HG568SB |
$53.00 |
|
|
Lula Magazine Loader/Unloader
Load high capacity magazines for M-16, AR-15, AK-47, Galil
UZI, CETME,
and M14/M1A. Works on both metal and plastic magazines. No more sore
fingers from loading magazines the hard way. Easily loads and unloads
magazines quickly. Fits any magazine that fits in the gun. Loads 10 ,20,
30, 100 round clips or drums.
Both Loads AND Unloads
35sec loading 30 rd.
5sec unloading 30 rd.
Safe on fingers and magazine
Absolutely no sore thumb!
Pocket size
Durable best quality glass-reinforced polymer
Weights approx. 38grams (1.3ounce)
Constructed of only two parts
ISO9002 manufacturing
Chemicals resistant
NOTE: None
of LULA™ loaders fits the following mags -
KAC SR25,
DPMS .308, STEN, HK G3, MINI 14, MINI 30, SKS, Thompson.
|

AK-47
/ Galil LULA™
loader and unloader for all such metal and plastic - 7.62mm AK47 and
5.56mm Galil magazines.
|
  
|
| Item
Number |
Description |
Price |
|
| 24216 |
Lula
Magazine Loader, fits AK-47 and Galil |
$26.00 |
|
| AK-47
Romanian Bayonet with Sheath, Frog, and Rubber Grip
Fits AK-47 Rifles
- Romanian Manufacturer
|

|
| Item Number |
Price |
|
| AKROMANIANBAYO |
$13.00 |
|
| AK
/ SKS Bipod
Fits most standard barrels, Great for the SKS and AK-47 / MAC-90 and
variations
Clamps on and
clears cleaning rod, Each leg extends from a standard length of 8" and rises to
13" by 3/4" increments.
Bipod folds together and clips together.
|

|
|
|

|
| Item Number |
Price |
|
| ABA |
$20.00 |
|
| SKS
Barrel Clamp Style Bipod
Fits the SKS rifle
Must have 1.5 inches of clear barrel to mount and no spike or blade
bayonet below barrel
Installs easily-only one screw to loosen/tighten Legs extend with
several positions for comfortable height / Fold back while not in use
Black matte finish made of aluminum |
 |
 |
 |
 |
 |
| Item Number |
Price |
|
| SKSBP |
$20.00 |
|
| Adv
Tech SKS Featherweight
Non-Swivel Bipod
Revolutionary bipod offers exceptional features at
less cost. Mounts to bayonet lug. Weighs only 6oz. Simply press the
"snap-n-lock" button to fold legs forward, down or rearward. To
extend/retract legs in ONE SECOND from 9" to 13", twist thumbnut
screw. All hardware is included for installation without gunsmithing. Will
not scratch rust or dent. Allows use of a sling and includes non-slip
rubber feet. Made in the USA by Advanced Technology, Inc of black,
glass-filled nylon. Lifetime Warranty. |
 |
| Item Number |
Price |
|
| BIP0700 |
$36.00 |
|
| Zytel
Clamp-on Bipod
Made of durable Zytel. Extremely light weight - only 6 oz.
Clamps around barrel and fits most guns. Folds to be carried in your
pocket or bag. Very sturdy and affordable. Best valued
economic solution for your practical needs. Great for ground hogs
with high powered rifles!! Not for use on rapid fire weapons. |

|
|

|

|
| Item Number |
Price |
|
| TL-BP70 |
$8.50 |
|
| 7.62X39
Cleaning Kit
This kit contains everything you need to clean and
maintain your AK/SKS type rifle. Components include steel rod with handle,
bore brush, nylon gun brush, and a military grade windage/elevation sight
tool. A military style pouch
with belt loop is supplied for storage.
Does not Contain
broken shell extractor and gas port scraper as pictured below
|
|

Does not Contain broken shell extractor and gas port
scraper as pictured above
|
| Item
Number |
Price |
|
| CLN0309 Does
not Contain
broken shell extractor and gas port scraper as pictured above
|
$21.00 |
|
| Buffer
Technologies AK-47 / Valmet Recoil Buffer
The AK/Valmet Recoil Buffer™ fits on the recoil spring guide rod of any
Kalashnikov style weapon. This includes AKs, Valmets, Galils, Vepr,
and MAK 90s, just to name a few. Installation takes less than a minute and
can be done without any special tools. What makes the kalashnikov action
so reliable, is also what causes its inevitable downfall, the violent
manner in which it works. Each time you fire your rifle the gas system
propels the bolt carrier to the rear very violently, which generates a
shock wave that is absorbed by the metal receiver. After a period of time,
this repeated pounding causes the action itself to lose its structural
integrity. The most notable side effect of this is the difficulty one has
in controlling the weapon during rapid fire. By installing a Recoil Buffer™
you totally eliminate the metal to metal impact of the bolt carrier to the
receiver and most of the action noise.
Those whose who install Recoil Buffers™ into their AK's will
not only be protecting their investment by prolonging its service life,
but they will also find that the recoil is reduced and muzzle stability is
increased. In fact, Recoil Buffers™ can do this for any gun! They work
so well that many people believe they should be installed in all guns by
their manufacturers. Unfortunately, this is not yet the case. So, until
that time comes, make sure your weapon functions as well as it possibly
can! |
|

|

|
| Item
Number |
Price |
|
| AK-1 |
$15.00 |
|
| Buffer
Technologies SKS Recoil Buffer
The SKS Recoil Buffer™ fits in the rear of the top assembly and is
made to the exacting tolerances to insure a tight fit. An indentation in
the Recoil Buffer™ itself provides a secure resting spot for the recoil
spring guide, making assembly much simpler. The SKS Recoil Buffer™ will
fit all variations of Russian and Chinese SKSs. As with the rest of the
Recoil Buffer™ line, installation is a snap and requires no special
tools
Much like the Kalashnikov action, the SKS action is super-reliable,
but that reliability has a cost. Each time you shoot an SKS the bolt
carrier impacts the inside of the top cove. This operation takes its toll
on the working mechanism. While not important to a foreign super power
that has an arsenal of replacement weapons, it is to you!
By installing an SKS Recoil Buffer™ you totally eliminate the
metal to metal impact of the bolt carrier to the receiver, thereby
eliminating the shock to the receiver. The Recoil Buffer™ also prevents
any shock from reaching a scope if you have one installed |
 |
 |
| Item
Number |
Price |
|
| SKS1 |
$10.00 |
|
| AK-74
Bell Shape Compensator
Fits all AK's with a threaded barrel
Left Hand Thread |

|
| Item Number |
Price |
|
| AKA03 |
$17.00 |
|
| AK-47
Cage Muzzle Brake
NEW!! NEW!!!
Fits AK-47 With
Threaded Barrel
Inspired by the highly
effective RPK brake found on the AK’s big brother, the TAPCO Cage Brake
provides improved styling and helps dampen recoil. Machined from
high strength steel, our brake is finished in phosphate for years of
rugged use and many thousands of rounds. It is threaded in the
standard 14 X 1 LH and can be installed as a replacement for any threaded
AK muzzle. This item
counts as 1 U.S. Sec 922R compliant part. |
Fits
AK-47 With Threaded Barrel |
|

|
| Item Number |
Price |
|
| AK0687 |
$15.00 |
|
| TAPCO
AK-47 M16-Style Muzzle Device
FOR THE AK-47
The popular M16 cage flash hider is now available for your AK.
NEW!!! NEW!!!
NEW!!! NEW!!!
|

|
|

|
| Item
Number |
Price |
|
| AK0685 |
$15.00 |
|
| TAPCO
AK-47 Slotted Muzzle Brake
NEW!!! NEW!!!
Fits AK-47 With
Threaded Barrel
Inspired
by the highly effective RPK brake found on the AK’s big brother, the
TAPCO Slot Brake provides improved styling and helps dampen recoil.
Machined from high strength steel, our brake is finished in phosphate for
years of rugged use and many thousands of rounds. It is threaded in the
standard 14 X 1 LH and can be installed as a replacement for any threaded
AK muzzle. This item counts as 1 U.S. Sec 922R compliant part.U.S. Sec 922R compliant part.
MADE IN THE USA!!
|

|
| Item Number |
Price |
|
| AK0688 |
$15.00 |
|
| SKS/AK
PIN STYLE MUZZLEBRAKE
Pin on style for SKS and AK
Matte Black
Steel construction
Fits Russian and Chinese only
|

|

|
| Item Number |
Price |
|
| SKSMB |
$19.00 |
|
| Choate SKS
Recoil Compensator
Choate Machine & Tool makes a recoil compensator for the popular
S.K.S. rifles. These compensators are acid-bath blued and simply slide
over the end of the barrel and attach to your bayonet ring. (Cannot be used
with bayonet.) |

|
| Item
Number |
Price |
|
| 18-07-02 |
$31.00 |
|
| TAPCO
SKS
Yugo Muzzle Brake
Maintain the original look of your Yugoslavian 59/66 SKS by replacing
the unused grenade launcher with our functional muzzle brake.
Featuring 25 multi-directional ports that reduce recoil and
increase control; this steel brake is machined with the same thread pitch
as the original. Finished in
black oxide, this brake will complete the performance transformation of
your Yugo SKS. This Brake is THREADED.
Made in USA.
|

|
| Item
Number |
Price |
|
| SKS6627 |
$20.00 |
|
| SKS
Receiver Cover Pin
Replacement pin for the pin located on the lower receiver that goes
through and secures the upper receiver.
|
 |
| Item Number |
Price |
|
| ASKSP |
$6.50 |
|
|
TAPCO
SKS
Extended Mag Catch
Constructed of a lightweight polymer, this sturdy
magazine catch works with fixed or detachable magazines.
Fits Chinese, Russian, or Romanian rifle magazines, but will not
work on AK converted SKS rifles or Yugoslavian models.
|
 |
| Item
Number |
Price |
|
| MAG6603 |
$6.00 |
|
| SKS
Instruction Manual
Introduction manual for shooting and maintenance of the SKS 7.62 X 39
Rifle. Excellent strip down instructions for cleaning and maintenance with
lots of pictures and illustrations. Very easy to follow. Gives a brief history of the SKS rifle.
Book contains 19 pages
|

|

|
| Item Number |
Price |
|
| SKS0700 |
$4.00 |
|
|
Disassembly/Reassembly
Guide for SKS Rifles
DISASSEMBLY
& REASSEMBLY GUIDE
SKS Rifles & All Variants (2006)
For your Chinese, Manufacturers.
|
 |
 |
|
FEATURES:
•
The only current printed manual that includes information
on ALL models.
• Easy to use -- Comb binding lies open and flat on your
work surface.
• 16 pages & 20+ high-resolution grayscale images.
• Cardstock cover. Bright white paper.
|
Introduction:
Brief History
Safety First
Exploded Parts Diagram
Parts List
Disassembly
- Clear Weapon
- Magazine Latch
- Tool Kit
- Cleaning Rod
- Receiver Cover
- Recoil Spring Assembly
- Bolt
- Bolt Carrier
- Extractor
- Firing Pin
|
Disassembly
(cont.)
- Extractor & Spring
- Trigger Assembly
- Magazine Floor Plate Latch
- Magazine
- Handguard
- Gas Tube
- Driving Rod & Spring
- Handguard Ferrule
- Stock
- Bayonet
- Other
Reassembly
Tips & Tricks
Accessories |
|
|
Excerpt
from this Guide:
Brief History of the SKS
Semi-Automatic Rifle
(Samozaryadnyi Karabin Simonova)
The SKS Rifle chambered in caliber 7.62
x 39mm (SKS-45) was designed by Russian arms inventor Sergei Simonov and
was adopted by the Soviet Union in 1946. Since then the SKS has been
fabricated by several other countries including China (Type 56 / Norinco),
East Germany (Karabiner-S), North Korea (Type 63), Albania, North Vietnam,
Romania, and Yugoslavia (M59 & M59 /66).
The country of origin can be easily
determined by markings on the receiver. Russian models usually have two
Cyrillic characters followed by four numerals. The Soviet and East German
weapons usually carry the year of manufacture and the serial number on the
front left of the receiver. Chinese weapons have three Chinese symbols
usually followed by seven or eight numbers. Later models have the spike
bayonets. North Korean SKS’s have “63” stamped on the receiver
cover. East German versions have a hole through the stock for attaching
the lower end of the sling swivels. Yugoslav M59/66 are very easy to
identify due to their prominent spigot-type grenade launcher permanently
attached to the muzzle. |
| Item
Number |
Description |
Price |
|
| GGSKS DR |
Gun Guides SKS
Disassembly/Reassembly Guide |
$8.00 |
|
|
Disassembly/Reassembly
Guide for AK-47 AKM Rifles and Variants
DISASSEMBLY & REASSEMBLY GUIDE
AK-47 AKM & All Variants (2006) |
 |
 |
|
FEATURES:
•
The only current printed manual that includes
information on ALL models.
• Easy to use -- Comb binding lies open and flat on your
work surface.
• 16 pages & 20+ high-resolution grayscale images.
• Cardstock cover. Bright white paper.
|
Introduction:
Brief history of the AK-47
Safety First
Exploded Parts Diagram
Parts List
Disassembly
- Magazine
- Clear Weapon
- Receiver Cover
- Recoil Guide Spring
- Bolt Carrier & Assemblies
- Upper Forearm & Gas Tube
- Lower Forearm
- Bolt
- Firing Pin |
Disassembly
(cont.)
- Extractor
- Safety
- Hammer Spring TIP
- Hammer / Trigger Retainer
- Trigger
- Hammer
- Magazine
Reassembly
Bolt
Extractor
Firing Pin
Accessories
|
|
|
Excerpt
from this Guide:
Brief history of the AK-47
Assault Rifle
It has been estimated that the worldwide
production of the AK-47 rifle and its variants has exceed over 90 million.
The AK has been licensed (and copied) in dozens of countries. Even after
nearly 60 years, it is still the weapon of choice for soldiers, law
enforcement, and the gun enthusiast.
Mikhail T. Kalashnikov, a Soviet
Engineer, designed the weapon in the late 40’s and it was adopted by the
Soviet Army in 1949 as the officially designated “7.62mm Automat
Kalashnikova, obraztsa 1947 goda” (7.62mm Kalashnikov automatic rifle,
model of 1947). The weapon went into service in 1951.
The AK-47 and AKM (AK Modified) fire a
7.62 x 39-mm (M1943) ammo which is a heavy caliber small arms round
capable of defeating most body armor. The weapon is usually equipped with
30 round magazines and is available in a fixed wooden or folding stock (AKS).
The AKM has a stamped receiver and entered into service in 1961. The AK-74
fires a 5.45 mm bullet and has replaced many of the 7.62 weapons. All
models are gas operated with a rotating bolt feed system.
The semiautomatic version has a
“practical” rate of fire of 40 rounds per minute. The AK has an
“effective” range of about 300 meters. (328 yards). This is due to its
bulky bullet traveling at only 2,300 feet per second. Average weight: 9.5
Pounds. Overall length is 34.2 inches. Folded length: 27.5 Inches. |
| Item
Number |
Description |
Price |
|
| GGAK-47 DR |
Gun Guides AK-47
Disassembly/Reassembly Guide |
$8.00 |
|
| SKS
& AK-47 Front Sight Elevation Tool
Works on both Russian and Chinese SKS and AK-47
Key chain style, Adjust Elevation Only Of Front Sight
|
 |
| Item Number |
Price |
|
| TOOL0301 |
$5.00 |
|
| SKS
Crossbolt Tool/FAL Front Sight Tool
Designed to remove the original crossbolt on the SKS
stock, this handy tool can also be used to adjust the front site of your
FAL.
|

|
| Item
Number |
Price |
|
| TOOL0307 |
$5.00 |
|
| SKS
& AK-47 Windage and Elevation Tool
Adjusts both Windage and Elevation
Steel Construction, Small Dual Purpose Tool
|

|
| Item Number |
Price |
|
| SAT |
$12.00 |
|
| SKS
& AK-47 Windage and Elevation Tool
Adjusts both Windage and Elevation
Steel Construction, Small Dual Purpose Tool
|
 |
| Item Number |
Price |
|
| TAK |
$9.00 |
|
| NcStar
AK / SK Sling
Green web with leather tab ends
|
 |
| Item Number |
Price |
|
| AAKS |
$8.00 |
|
Adv
Tech SKS or AK Sling
Super strong adjustable 1-1/4 inch black nylon strap. Steel quick
detachable swivel and leather tab. Fits all SKS or AK type Adv Tech stocks.
|

|
| Item Number |
Price |
|
| SKS0400 |
$13.00 |
|
| TAPCO
SKS
Handguard with Picatinny Rail
As included in the SKS T6 stock system, this
handguard can also be installed on standard stocks to provide a solid
mounting platform. The
sighting groove running the length of the handguard allows the continued
use of your iron sights.
Available in Black, Dark Flat Earth, and OD Green |

|
| Item
Number |
|
Price |
|
| STK66301B |
SKS
Handguard with Picatinny Rail Black |
$10.00 |
|
| STK66301F |
SKS
Handguard with Picatinny Rail Flat Dark Earth |
$10.00 |
|
| STK66301G |
SKS
Handguard with Picatinny Rail OD Green |
$10.00 |
|
| Choate SKS
Ventilated Hand Guard
Avoid accuracy loss and extend the life of your barrel with one of our
Ventilated Hand Guards designed to dissipate heat generated during rapid
fire. Handguard only.
|

|
| Item
Number |
Price |
|
| 18-02-06 |
$15.00 |
|
Adv
Tech SKS Upper Handguard
Matches our (Adv Tech) custom stocks. Helps prevent burns.
|

|
| Item Number |
Price |
|
| SKS1100 |
$4.00 |
|
Adv
Tech SKS Retro-Fit Kit
Converts a fixed stock to a
folding stock. Sold as replacement part for folding stocks purchased prior
to Nov. 1990 (Sec 922R applies).
|

|
| Item Number |
Price |
|
| SKS0800 |
$8.50 |
|
| Saiga
Gas Piston For Rifles
Fits all Saiga Rifles .223, 7.62X39, .308, ect
Works With AK Tantal
Made In The USA
WILL NOT FIT SAIGA
SHOTGUNS
|

|
| Item
Number |
Price |
|
| SAG0702 |
$15.00 |
|
|
TAPCO
AK
Grip Screw and Bushing
This
new production grip screw and bushing is a replacement for the original AK
grip screw. Screw Length: 4"
|

|
| Item Number |
Price |
|
| AK06211 |
$8.00 |
|
AK
G2 Single Hook Trigger Group
 | Manufactured with 4140 tool grade carbon
steel
 | Military spec dark black oxide finish
 | Precision secondary machining ensures
perfect fit and function
 | Heat treated to 45-48C Rockwell
 | Improved trigger pull (3-4 lbs)
 | No painful trigger slap
 | Standard sized trigger and hammer pin
holes can still be used
 | "No fumble" trigger
sleeve...allows you to assemble the trigger group outside the rifle
and drop it in as one piece
 | Counts as 3 U.S. Sec. 922r compliance
parts (trigger, disconnector and hammer)
 | Made in the U.S.A.
 | Marked TAPCO U.S.A.
 | Lifetime warranty |
| | | | | | | | | | |
|
 |
| Item Number |
Price |
|
| AK0651 |
$37.00 |
|
AK
G2 Double Hook Trigger Group
 | Manufactured with 4140 tool grade carbon
steel
 | Military spec dark black oxide finish
 | Precision secondary machining ensures
perfect fit and function
 | Heat treated to 45-48C Rockwell
 | Improved trigger pull (3-4 lbs)
 | No painful trigger slap
 | Standard sized trigger and hammer pin
holes can still be used
 | "No fumble" trigger
sleeve...allows you to assemble the trigger group outside the rifle
and drop it in as one piece
 | Counts as 3 U.S. Sec. 922r compliance
parts (trigger, disconnector and hammer)
 | Made in the U.S.A.
 | Marked TAPCO U.S.A.
 | Lifetime warranty |
| | | | | | | | | | |
|
|
| Item Number |
Price |
|
| AK0650 |
$37.00 |
|
|