TDI Arms

The Country Shed

Mounts and Scopes	Tactical Shotgun	Meat Processing	Heated Gloves & Socks	SAKO Tikka Beretta
Holsters	Rifle Bases	Fishing Equipment	Handgun / Pistol	DVD's and CD's
Rifle Stocks	High Capacity Magazines	Tools	Books	Sling Shots
Flashlights & Lasers	Shotgun Stocks	Binoculars	Special Closeouts	General Accessories

Tactical Mounts for Lasers and Lights for the MP-5, UZI, G36, and FN Handgun.

Command Arms, NcStar, and Leapers Tactical Mounts for Lasers and Lights for the MP-5, UZI, G36,and FN handgun.

CMMG 57AFD1E Five-Seven 5.7mmX28mm 10 rd Mag Extension Black FinishRestricted Item -Check Your Local and State Laws Prior To Ordering 5.7 10rd Mag Extension. The ultimate upgrade to your 5.7x28 pistol. Simply remove floor plate, inspect factory mag opening for burrs (remove burrs as necessary) install extension, insert spring and add floor plate. Installation takes only seconds and does not permanently alter factory magazine. Chrome silicon spring is salt water resistant and will not take a set.		Mag NOT Included
Item Number	Price
57AFD1E	$16.00

Tapco MPA 9mm 32 Round Mag-Restricted Item -Check Your Local and State Laws Prior To Ordering See Shipping & Policies For List Of Restrictions Enjoy shooting your MasterPiece Arms 9mm Defender? Of course you do! But like all guns, they never come with enough mags.Tapco's 32rd magazine is very reliable and features aggressive grooves on each side for easy insertion and removal of the magazine. The stainless steel spring provides constant force and is corrosion resistant. Molded of military grade composite, our magazine will provide many years of service.
Item Number	Price
MAG3532	$20.00

Magpul 9mm Subgun Standard 3 Pack Now the same price as the 5.56 Magpul, the new 9mm Subgun Magpul™ which is designed for use primarily with 9mm subguns such as the HK MP5, Colt SMG and Uzi. The Magpul 9mm Subgun will also function on most SW40 and 45cal subgun weapon systems. When installed on the base of a rifle or subgun magazine, the Magpul provides unsurpassed speed and controllability during high stress, tactical magazine changes. Durable thermoplastic loop with recessed rough gripping surface Quick and easy installation and removal Patended design based upon the tried and true para-cord loops and duct-tape tabs currently in use with special warfare units worldwide 3 Pack Made in U.S.A
Item Number	Price
PUL9MM	9.50	Out Of Stock

Buffer Technologies MAC-11 Recoil Buffer The Buffer Technologies Recoil Buffer™ for the Mac 10 and 11 replaces the original factory unit. It differs from the original one in two very beneficial ways. First, it is made of a resilient, high-impact polyurethane. This material is capable of enduring the normal firing conditions that the factory unit couldn't stand up to. Second, it allows the recoil spring to rest against the rear support plate. This eliminates the severe compression between the bolt and the rear support plate so that the recoil spring, which had a tendency to chew up the buffer, no longer proves self destructive to the weapon. The Recoil Buffers™ will work with any caliber but the model must be specified with your order (Mac 10 or Mac 11). Those who install Recoil Buffers™ into their Mac's will not only be protecting their investment by prolonging the weapons' service life, but they will also find that the recoil is reduced and muzzle stability is increased which is very important for rapid fire. In fact, Recoil Buffers™ can do this for any gun! They work so well that many people believe they should be installed in all guns by their manufacturers. Unfortunately, this is not yet the case. So, until that time comes, make sure your weapon functions as well and as long as it possibly can.

Item Number	Price
M11	$6.50

Buffer Technologies MAC-10 Recoil Buffer The Buffer Technologies Recoil Buffer™ for the Mac 10 and 11 replaces the original factory unit. It differs from the original one in two very beneficial ways. First, it is made of a resilient, high-impact polyurethane. This material is capable of enduring the normal firing conditions that the factory unit couldn't stand up to. Second, it allows the recoil spring to rest against the rear support plate. This eliminates the severe compression between the bolt and the rear support plate so that the recoil spring, which had a tendency to chew up the buffer, no longer proves self destructive to the weapon. The Recoil Buffers™ will work with any caliber but the model must be specified with your order (Mac 10 or Mac 11). Those who install Recoil Buffers™ into their Mac's will not only be protecting their investment by prolonging the weapons' service life, but they will also find that the recoil is reduced and muzzle stability is increased which is very important for rapid fire. In fact, Recoil Buffers™ can do this for any gun! They work so well that many people believe they should be installed in all guns by their manufacturers. Unfortunately, this is not yet the case. So, until that time comes, make sure your weapon functions as well and as long as it possibly can!

Item Number	Price
M10	$6.50

G36 Handguard Picatinny/ Weaver Rail 3 7/8” long Picatinny/Weaver rail. Two screw holes with recess housing. Seven slots on rail. Complete with 3 Screws. Excellent quality and pricing.

Item Number	Price
MNT-P501	$12.00

Your privacy is important to us. Our Checkout page uses the absolute highest level of Internet SSL Security and personal information is NOT sold or traded.

Can't find what you are looking for??? Contact Us with the manufacturer, product number, and a detailed description of the product you are looking for. Please be very specific. We offer much more than what is on our site.

Errors including descriptive, photographic, pricing, and/or typographic are subject to correction at any time. Pricing does not include shipping or any applicable taxes.

2013, The Country Shed

RESTRICTED ITEMS Some of the goods on The Country Shed website may be restricted in your delivery area by Federal, State, and/or Local law. The Country Shed does not, and cannot grant the right or authority to persons to purchase items which may be regulated pursuant to such laws. You must be 21 years of age to purchase anything from The Country Shed and it is your responsibility to check Federal, State, and/or Local laws to insure legal possession of such items in the delivery area. Further, pursuant to 18 U.S.C. 922 (D)(1)-(9), you cannot be under a legal disability to purchase certain restricted items.

Scope Mounts, Mounts, Scopes, Compact Scopes, Stocks, Rifle, Handgun, Pistol, Assualt Weapons, Foregrips, Folding Stocks, Cleaning Kits, Sight Tools, Lasers, Flashlights, Tactical Gear, Magazines, Shotgun, Tactical Vests, Holsters, Light Rails, Picatinny Rails, SKS, AK-47, MAC-90, AR-15, M16, M1 Garand, M14, M1A, Mini-14, Mini-30, M1 Carbine, Hi-Point, H&K, CETME, FN FAL, Glock, Beretta, SAKO, Tikka, Remington, Winchester, Mossberg, Military Surplus, Jerky Guns, Jerky Spices, Meat Processing Supplies, Advanced Technology, Leapers, UTG, AmegaRanges, Beretta, UltiMAK, TDI, Command Arms, First Samco, MPI Outdoors, Tapco, Buffer Technologies, Blackhawk, Choate, MAKO, Fab Defense, McGowan, Napier, NcStar, Streamlight, Sports Pictures, College Football, NFL, NHL, MLB, CFL, NASCAR, Jersey, Football, Baseball, Hockey, and more!!

Magpul 9mm Subgun Standard 3 Pack