0 Items
  1. Home
  2. Shop By Firearm
  3. Shop By Rifle
  4. Browning
  5. EGW Browning A-Bolt Short Action Picatinny Rail Scope Mount 20 MOA Ambidextrous
EGW Browning A-Bolt Short Action Picatinny Rail Scope Mount 20 MOA Ambidextrous
EGW Browning A-Bolt Short Action Picatinny Rail Scope Mount 20 MOA Ambidextrous

EGW Browning A-Bolt Short Action Picatinny Rail Scope Mount 20 MOA Ambidextrous

Write a Review
Price: $39.00
EGW Evolution Gun Works makes scope mounts and scope bases for most popular rifles in 0 MOA, 20 MOA, 30 MOA, and 40 MOA. Put a scope on your favorite rifle with a quality mount Made In The USA.
Part Number: 43002
Availability:
Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Only
Mounting Hardware: Hex Head Screws and Wrench Provided

Short Action:
Center Spread: 3.125"
Overall Length: 6.276"
Height: 0.4"

*The center spread is the distance between the two middle holes, center to center, on your receiver.

**We do not currently offer a Browning A-Bolt that will work for the Mountain Titanium in .300WSM.

We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 

Add EGW’s Practical or HD Scope Rings to make it a complete overhaul!

We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.


CALIFORNIA RESIDENTS ONLY – WARNING: Some products may contain a chemical known to the State of California to cause cancer, or birth defects, or other reproductive harm. For more info, visit https://www.p65warnings.ca.gov/

Recently Viewed Items