This mount fits:
CVA Cascade Long Action Models
EGW recommends using Medium Height Rings with this mount with 50mm objective lens scopes. The image above with the 50mm objective lens scope uses our low rings and there is very little room for adjustment for eye relief.
Rail Type: One Piece Picatinny
Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Anodizing
Center Spread: 4.11"
Overall Length: 7.458"
Height: .4" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Quick Disconnect Ring Compatible: No
Torque Specs: 20 in/lbs
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
Need a scope mount for your CVA Cascade? Our one piece CVA Cascade Long Action 20 MOA picatinny scope mount can help. Utilizing a multi-slot design, our scope base allows your scope rings to be mounted virtually anywhere along the base for a quick and easy mounting process.
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
EGW machines these in their shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.