EGW Hunter Series Remington 700, 721, 725, Sauer 100/101, Bergara B14 Long Action Picatinny Rail 20 MOA
50100 mounts manufactured after 12/2020 are drilled to accommodate larger diameter screws (#8-40) and now come with #6-48 and #8-40 screws. The head diameter on the #6-48 screws provided with this mount is larger than our normal #6-48 screws.
If you have questions about your specific firearm, or need help regarding the specific screw size, you should contact Remington Customer Support at 1-800-243-9700 and supply them with your serial number.
The blue bag of screws provided are #6-48 screws.
The red bag of screws provided are #8-40 screws.
Mounting Hardware is Included
This mount fits:
Bergara B14 Long Action (#6 Screws)
Bergara Premier Long Action (#8 Screws)
Remington 700 Long Action
Remington 700 Long Action (#8 Screws)
Remington 700 Long Action Police Tactical (#8 Screws)
Remington 721 Long Action
Remington 725 Long Action
Christensen Arms Long Action
Mauser M18 (All Calibers)
Sauer 100 (All Calibers)
Sauer 101 (All Calibers)
Rail Type: One Piece Picatinny
Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Hardcoat
Center Spread: 4.485"
Overall Length of Mount: 6.302"
Height: .35" (Top of Receiver to Top of Picatinny)
Weight: 2.5 oz
Quick Disconnect Ring Compatible: Yes
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: #6-48 X 1/4" Screws, #8-40 X 1/4" Screws and T-10 Bit Included
Torque Specs: 20 in/lbs
EGW's Hunter series picatinny scope mount. EGW saw the need for a shorter, lighter, heavy duty, picatinny scope mount and this is what they came up with. After countless hours of prototyping and testing, the Hunter mount was born.
7075 T6 aluminum for an extremely durable yet lightweight construction.
Type III hardcoat anodizing protects the mount from whatever nature can throw at it.
Chamfered edges provide a snag free hunt.
A compact overall length sheds 15% of its weight compared to our other Heavy Duty mounts.
This mount comes standard with a bevel on both sides making it ambidextrous.
The bolt pattern on our Remington 700 Long Action mount fits Long Action Remington 700 rifles (example 30-06, 300 Win mag), as well as the 740 and 40x. Despite what you may have heard, the Remington 700 mount will NOT fit your Howa 1500 or Weatherby Vanguard. The bolt pattern is similar, but the remainder of the mount (ejection port, length, etc.) renders it useless on these two guns.
We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW's one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
EGW machines these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, EGW recommend zeroing at 200 yards.
The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.