Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Hardcoat Anodized Matte Black Only
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: Socket Head Torx® Screws and Wrench Provided
Overall Length of Mount: 5.575"
Height: Front .540" Rear .567"
Torque Specs: 25 in/lbs
Dovetail: 3/8" (measures .5" across top of dovetail)
This mount is made specifically for the CZ 452, 453, 511 and 512. This base is Right-Handed only.
It is available in 3/8" and 11mm dovetails. Determine which dovetail you have by measuring across the top of the dovetail. If you measure 0.437" you have an 11mm dovetail. If you measure 0.5" you have a 3/8" dovetail.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".
After machining; the mounts are tumbled and sand blasted. The aluminum mounts are Type III hard coat anodized for long lasting durability. The steel rails are Mil Spec parkerized for a durable rust resistant finish.
Compatible with Picatinny or Weaver scope rings. Add EGW’s HD Scope Rings to make it a complete package!
From manufacturing to packaging, EGW’s products are made with pride in the USA.
Installation: EGW recommends 25 inch lbs of torque and a drip of blue loctite.
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.