0 Items
  1. Home
  2. Shop By Firearm
  3. Shop By Rifle
  4. Weatherby
  5. EGW HD Weatherby Mark V TRR (6 Lug Only) Picatinny Rail Scope Mount 20 MOA Ambidextrous
EGW HD Weatherby Mark V TRR (6 Lug Only) Picatinny Rail Scope Mount 20 MOA Ambidextrous
EGW HD Weatherby Mark V TRR (6 Lug Only) Picatinny Rail Scope Mount 20 MOA Ambidextrous

EGW HD Weatherby Mark V TRR (6 Lug Only) Picatinny Rail Scope Mount 20 MOA Ambidextrous

Write a Review
Price: $69.00
EGW Evolution Gun Works makes scope mounts and scope bases for most popular rifles in 0 MOA, 20 MOA, 30 MOA, and 40 MOA. Put a scope on your favorite rifle with a quality mount Made In The USA.
Part Number: 80712
Availability:
Mounting Hardware is Included

This mount fits:
Weatherby Mk V (Mark 5) TRR

Typical in calibers:
.224 WBY Mag
.240 WBY Mag
6.5 WBY RPM
6mm Creedmoor
.243 Win
6.5 Creedmoor
.270 Win
.280 Ackley Improved

Rail Type: One Piece Picatinny
Machined From: Solid 7075 T6 Aircraft Grade Aluminum
Finish: Matte Black Hardcoat
Center Spread: 4.280"
Overall Length of Mount: 6.670"
Height: .35" (Top of Receiver to Top of Picatinny)
Weight: 2.5 oz
Quick Disconnect Ring Compatible: Yes
Ambidextrous: Yes
Compatible with Picatinny or Weaver scope rings.
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Wrench Included
Torque Specs: 20 in/lbs
EGW's Weatherby Mark V TRR (Threat Response Rifle) mount is made specific to the gun and ONLY fits the 6 lug Weatherby MK V TRR.

This mount comes with a bevel on both sides of the ejection port, making it ambidextrous.

The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spread on our Weatherby Mark V TRR mount is 4.280". If this spread does not match, you may need our Standard Weatherby Mark V mount. The middle spread for our Standard Mark V mount is 4.485". Please see our separate listing for the Weatherby Mark V if you require the standard mount.

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

EGW machines these in their shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability.

EGW recommends:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards

When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.


CALIFORNIA RESIDENTS ONLY – WARNING: Some products may contain a chemical known to the State of California to cause cancer, or birth defects, or other reproductive harm. For more info, visit https://www.p65warnings.ca.gov/

Recently Viewed Items