For use with standard Ruger 10/22 OEM scope rail or similar rail. (Must
have 3/8" rail on top).
Rugged All Steel Construction. Provides longer sight radius than original
Use as primary sight or as backup sight. Will allow co-witness with some
low profile red dots NOT INCLUDED (ex.
Bushnell TRS-25, Aimpoint Micro).
Rear sight has easy to use Windage & Elevation adjustments with
incremental spring loaded detent locking.
.062 diameter aperture.
Front sight has additional elevation adjustment with detent locking using
standard AR15/M16 style post.
TSR200RL includes both a rear sight and front
sight assembly. RED DOT SIGHT NOT INCLUDED
Q – Do I need one of your tools to adjust the sight and if so which
A – The windage can usually be adjusted with your fingers and if it
is a little stiff a penny in the slot of the windage screw will work. The
elevation dial can be moved with a pointed object like the tip of a golf
tee. The TS211 has a small spanner wrench on it that will work on the
elevation dial and the windage knob so it makes the job easier. The front
post can be adjusted with a pointed object or the TS155 tool. (See