Buffer Technologies HK 91/93 Full Stock Recoil Buffer

Recoil buffers are an easy and inexpensive way to eliminate damage of critical components by preventing the metal to metal contact of the slide or breech block with the frame. Made from a high density polyurethane formulated for maximum shock-absorbing characteristics, the recoil buffer is a drop-in part.

Product Description

Buffer Technologies recoil buffers are an excellent way to reduce parts wear and recoil of your firearms. Polymer recoil buffers prevent the metal on metal impact of a firearms bolt or slide from impacting the fame while firing. Our Buffers are made from Estane 58130 which won't be affected by common firearm cleaners and should last for hundreds and hundreds of rounds. Buffers will need to be replaced eventually, but the reduction of wear and recoil they provide makes them a valuable firearm accessory 

The Heckler and Koch G3, along with its semi-automatic version, the Model 91, are designed with a solid metal recoil buffer assembly which fits into the buttstock. This factory designed buffer receives the impact of the bolt carrier each time it is fired. This metal to metal impact is what causes felt recoil. The Buffer Tech replacement buffer is injection molded. When installed, it takes the beating from the bolt carrier instead of the receiver and your shoulder! Not only will it save your shoulder, it will also improve muzzle stability for multiple shot accuracy. This buffer ONLY works on full stock versions...NOT the collapsible stock version!

 

Installation instructions included for HK91/93 recoil buffer

1. Remove buttstock assembly from weapon. Remove butt pad from buttstock. Remove screw in the back of existing metal recoil buffer, using a long screwdriver. Remove two screws holding the metal recoil buffer in position.

2. Replace the metal recoil buffer with the recoil buffer. Replace the two metal screws, without the washers, tighten to the point that buffer is secure, but not compressed.

3. Replace buttstock assembly.